Menue

Archive

Federal Ministry of Education and Research (BMBF)

NanoStruk - Super-hydrophobic and oleophobic coatings with nano-paints on stainless steel, 10/2014 - 9/2016
Dr. Cornelia Bellmann, Dept. Polymer Interfaces

Development of conductive polymer composites with improved processability and impact resistance/ bending strength, 8/2014 - 7/2016
Dr. Petra Pötschke, Dept. Functional Nanocomposites and Blends

Wachstumskern highSTICK plus - Design and Development of Functionalized Prepregs, 12/2012 - 11/2015
Prof. Dr. Gert Heinrich, Dept. Composite Materials
Dr.-Ing. Axel Spickenheuer, Dept. Composite Materials

Virtual Liver, 4/2010 - 3/2015
Prof. Dr. Carsten Werner, Inst. of Biofunctional Polymer Materials

Spitzenforschung und Innovation in den Neuen Ländern - Kompetenznetzwerk für Nanosystemintegration (nanett);
subproject: Material integrated sensor technology based on nano effects - development of a conductive polymer matrix, 11/2012 - 10/2014
subproject: Material integrated sensoric - development of multi-functional polymer composite structures, 11/2009 - 10/2012
Prof. Dr. Brigitte Voit
Dr. Petra Pötschke, Dept. Functional Nanocomposites and Blends

RADCOLLS -Selective materials for decontamination of solids and prevention radionuclides from spreading, 11/2012 - 10/2014
Dr. Frank Simon, Dept. Polymer Interfaces

Low-Fouling and Chlorine resistant RO membranes, 9/2011 - 5/2014
Prof. Dr. Brigitte Voit, Dept. Polymer Struktures
Dr. Jochen Meier-Haack, Dept Reactive Processing

Electrically and thermally conductive polymer nano-composites: Improved dispersion of nano-structured graphite in polyolefins by chemical modification, 5/2011 - 4/2014
Dr. Jürgen Pionteck, Dept. Functional Nanocomposites and Blends

CarboAktiv- Innovation Alliance Carbon nanotubes: Innovation for industry and society (Inno.CNT); Conductive laser activatable polymer composites with carbon nanotubes for treedimensional integrated housing applications, 4/2011 - 3/2014
Dr. Petra Pötschke, Dept. Functional Nanocomposites and Blends

PaTra - Fluidic particle transport at interfaces by using actoric micro hairs with a switchable nanopattern; subproject: functional nano structures, 11/2010 - 03/2014
Dr. Petra Uhlmann, Dept. Nanostructured Materials

ELAGRA - Graphene based Rubber Composites, 8/2010 - 1/2013
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Development of new nano-coatings and / or detergent additives for Easy-to-clean layers in the system Easy-to-clean-layer - defined pollution - cleaning solution, 10/2010 - 9/2012
Dr. Cornelia Bellmann, Dept. Polymer Interfaces

Regenerative Potential of Mesenchymal Stroma Cells
Subproject: Materials to Support Isolation, Expansion and Differentiation of Mesenchymal Stroma Cells, 5/2009 - 4/2012
Prof. Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

ENEFEL - Energy-Efficient Elastomers, 4/2009 - 3/2012
Prof. Dr. Gert Heinrich, Dept. Composite Materials

CarboDis - Innovation Alliance Carbon Nanotubes (Inno.CNT) - Develop tailor-made dispersion technologies for thermosetting, thermoplastic and elastomeric systems, 4/2008 - 3/2012
Dr. Petra Pötschke, Dept. Polymer Reactions and Blends

CarboTube - Innovation Alliance Carbon Nanotubes (Inno.CNT) - CarboTube-Develop injection molding and extrusion applications such as antistatic finishes, electrically conductive pipes, lightweight building panels, films and machine components, 2/2009 - 1/2012
Dr. Petra Pötschke, Dept. Polymer Reactions and Blends

HaematoSys - Systems Biology of the Haematopoetic Systems and Related Neoplasias, 3/2009 - 2/2012
Dr. Tilo Pompe, Dept. Biofunctional Polymer Materials

ForMaT phase 1: Screening - "Modified and Recycled PTFE" (MoRe-PTFE), 11/2008 - 4/2009
ForMaT phase 2: Innovation lab - "Modified and Recycled PTFE (MoRe-PTFE), 11/2009 - 10/2011 more ...
Dr. Dieter Lehmann, Martin Fischer, Dept. Reactive Processing

Novel functional and biomimetic surfaces to prevent ice growth, 9/2007 - 8/2010
Dr. Petra Uhlmann, Dept. Nanostructured Materials

COMPOMEL - Development of polymeric nanocomposites with  enhanced mechanical and electrical properties
Subproject:  Material-processing relationships during melt mixing, 5/2007 - 7/2010
Dr. Petra Pötschke, Dept. Polymer Reactions and Blends

ULTRASURF - Development of innovative nanoparticle based coatings using switchable multifunctional surfaces and transfer into the production process
sub-project: investigation of the fundamentals for the coating's development, 5/2007 - 4/2010
Dr. Petra Uhlmann, Dept. Nanostructured Materials

Molecular control of performance and biocompatibility of medical membranes, 3/2007 - 12/2009
Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

Prediction of properties of CNT polymer composites by percolation net works´modelling and simulation, 1/2007 - 12/2009  more ...
Prof. Dr. Gert Heinrich, Dept. Composite Materials

High Performance Proton-Exchange Membranes for PEM Applications based on sulfonated Polysulfones (HiPEM): Preparation of sulfonated Multiblockcopolymers for the Improvement of Properties during PEM-Applications, 1/2007 - 12/2009
Dr. Jochen Meier-Haack, Dept. Reactive Processing

Safe technology for coating of fiber enhanced polymer composites, 11/2006 - 12/2009
subproject: Development/modification of substances and application technology for antistatic priming of SMC-substrates
Dr. Michaela Gedan-Smolka, Dept. Reactive Processing
subproject: Characterisation of coatability of SMC-parts by physico-chemical, microskopic and spectroscopic methods
Dr. Karina Grundke, Polymer Interfaces

ELASTO: Novel rubbers based on elastomeric nano-composites, 7/2005 - 6/2009  more ...
Prof. Dr. Gert Heinrich, Dept. Composite Materials

BIOTEX - Bionic design and textile manufacturing process to produce optimized fiber composites at low costs, 1/2005 - 12/2008  more ...
Dr. Konrad Gliesche, Dept. Composite Materials

Lightweight constructions employing nano-composites Development of materials and their characterization, 6/2005 - 9/2008
DP Bernd Kretzschmar, Dept. Processing
Dr. Petra Pötschke, Dept. Polymer Reactions and Blends

Radiation curing of water-based nano-composite varnishes to improve the scratch resistance of coatings applied in the automotive industries. Characterization and stabilization of water-based nano-composite varnishes, 6/2005 - 5/2008
Dr. Simona Schwarz, Dept. Surface Modification

Platform technology to employ immobilized membrane proteins in analytical systems, 5/2004 - 12/2006
Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

Development of a modular master-batch system and a novel film architecture for durable agricultural films with an improved resistance against agricultural chemicals, 7/2002 - 12/2006
DP Bernd Kretzschmar, Dept. Processing

A novel concept for the tissue engineering of long hollow bones on the base of the bio-textile scaffolds, 4/2004 - 6/2006  more ...
Dr. Konrad Gliesche, Dept. Composite Materials

Contributions to the research agenda "Improving the lasting effect in the sponsorship of surface technologies".
Coordination of the topic "surface coatings for smart surfaces", 9/2004 - 3/2006
Dr. Petra Uhlmann, Dept. Nanostructured Materials

Well-ordered structures of photo-active materials produced with polymer templates, 1/2004 - 3/2006
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

New materials for medicine: Centre of excellence in materials in blood and tissue contact, 3/2001 - 2/2006
Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

Development of uretdione powder coatings for the pre-coating of deep-drawable aluminium sheets and a new technology for processing aluminium parts, 3/2002 - 12/2005
Dr. Michaela Gedan-Smolka, Dept. Reactive Processing

Federal Ministry for Economic Affairs and Energy (BMWi)/German Federation of Industrial Cooperative Research Associations "Otto von Guericke" (AiF) / in the context of Zentrales Innovationsprogramm Mittelstand (ZIM)

Sustainable biocatalytic reduction of persistent organic compounds for better wastewater quality; Development of effectively acting anti-biofouling coatings of enzyme-doted supports for biocatalytic reduction of persistent organic compounds from wastewater, 7/2014 - 6/2016
PD Dr. Doris Pospiech, Dept. Polymer Structures

Wear-resistant fiber ropes by use of novel lubricants and coating materials; Development of special PTFE-containing additives for the preparation of new rope lubricants, 5/2014 - 5/2016
Dr. Thorsten Hoffmann, Dept. Reactive Processing

Development of a testing device for fibre-matrix adhesion strength - Materials and processing implementations, 6/2014 - 5/2016
Prof. Dr. Edith Mäder, Dept. Composite Materials

Development of a process for the preparation of permanent antistatic semi-finished products from ultrahigh molecular weight polyethylene (UHMW-PE) without using carbon-based additives
Subproject: Development of polymeric antistatic additives for the permanent antistatic preparation of UHMW-PE, 2/2014 - 1/2016
Dr. Antje Taeger, Dept. Reactive Processing

Federal Ministry of Economics and Technology (BMWi)/ German Federation of Industrial Cooperative Research Associations "Otto von Guericke" (AiF) / im Rahmen des Zentralen Innovationsprogramms Mittelstand (ZIM)

Funded by the Federal Ministry of Economics and Technology based on a decision of the Deutsche Bundestag

A new kind of cfrp moulding tools with long service life (10k-Tool); Material development of wear resistant CFRP mould surfaces and numerical simulation of the mechanical and thermal component behaviour, 1/2013 - 7/2015
Dr.-Ing. Axel Spickenheuer, Dept. Composite Materials

Development and implementation of test routines for multiaxial quasi-static and dynamic characterization of elastomers, 6/2013 - 5/2015
Dr. Konrad Schneider, Dept. Mechanics and Structure

Process development for the production of silicon-free semifinished products from ultrahighmolecular polyethylene (UHMW-PE) with improved tribological properties. Development of PTFE-modified ultrahighmolecular polyethylene with improved tribological properties. Improvement of these modifies with respect to the process of semifinished products production, 7/2012 – 6/2014
Dr. Antje Taeger, Dept Reactive Processing

Development of reactive additives for poly(ethylene terephthalate) (PET) chain extension - Development of a reactive extrusion procedure for PET chain extension using these additives, 1/2012 - 12/2013
Dr. Antje Taeger, Dept Reactive Processing

Development of an new thermoset material with adjustable antistatic properties, 12/2011 - 11/2013
Dr. Frank Taeger, Dept. Reactive Processing

Conditioning of heavy metal containing industrial effluents by means of synthetic polyelectrolytes as well as their combination, 11/2011 - 10/2013
Dr. Simona Schwarz, Dept. Polyelectrolytes and Dispersions

Development of a combined coating-additive system for the integration of basaltic fibres in ceramic materials, 3/2011-4/2013
Prof. Dr. Edith Mäder, Dept. Composite Materials

Development of stress adapted light weight constructions with online-commingled hybrid yarns consisting of continuous glass and polyamide filaments based on tailored fibre placement, 4/2011 - 3/2013
Prof. Dr. Edith Mäder, Dept. Composite Materials

Development of a technology for integration of a spacing medium in TFP-preforms to increase bending stiffness, 12/2011 - 12/2012
Axel Spickenheuer, Dept. Composite Materials
Emanuel Richter, Dept. Composite Materials

Antistatic adhesion polymers through integration of carbon nanotubes (CNTs); selection of adhesion systems, adhered parts and CNTs. Functionalisation and dispersion of CNTs. Characterization of functionalised CNTs and polymer composites, 7/2010 - 02/2012
Dr. Petra Pötschke, Dept. Polymer Reactions and Blends
Martin Kirsten, Dept. Nanostructured Materials

Development of a highly centrifugal force loaded rotor, 1/2009 - 12/2011
Prof. Dr. Gert Heinrich, Dept. Composite Materials
Dr. Konrad Gliesche, Dept. Composite Materials

Process development for the improvement of mechanical properties and the increase of the process safety of industrial laminates with a PTFE content; development of the technology for the improvement of composite properties of phenolic resins/epoxy resins with special modified PTFE products, 3/2010 - 11/2011
Dr. Dieter Lehmann, Dept. Reactive Processing

Process for Powder-Coating of non-conductive plastic Substrates by Creation of a Surface Conductivity: Surface Modification by Adsorption and process-integrated Coupling, 8/2009 - 7/2011
Dr. Jürgen Nagel, Dept. Melt Modification

Development of a chemical and physical process for the use of heterogenous fiber constituents from waste-tire recycling together with plastic waste of different kinds.
Development of technological fundamentals for the separation and modification of fiber constituents as well as the compounding into waste thermoplastics, 11/2008 - 10/2010
Dr. Frank Taeger, Dept. Melt Modification

Federal Ministry for Economic Affairs and Energy (BMWi)/ German Federation of Industrial Cooperative Research Associations "Otto von Guericke" (AiF) / Industrielle Gemeinschaftsforschung (IGF)

PreFiHy - Prefinished metal polymer hybrid parts, 9/2014 - 8/2016
Dr. Michaela Gedan-Smolka, Dept. Reactive Processing
Dr. Ines Kühnert, Dept. Processing

Thermoplastic Parts with Permanent Electrical Discharging Surface Layer, 2/2014 - 1/2016
Dr. Jürgen Nagel, Dept. Reactive Processing

Federal Ministry of Economics and Technology (BMWi)/ German Federation of Industrial Cooperative Research Associations "Otto von Guericke" (AiF) / Industrielle Gemeinschaftsforschung (IGF)

Investigation of sizings for improved interaction of carbon fibres with composites matrices, 12/2011 - 11/2013
Prof. Dr. Edith Mäder, Dept. Composite Materials

Biopolymers as flocculants for emulsions, 8/2011 - 10/2013
Dr. Simona Schwarz, Dept. Polyelectrolytes and Dispersions

Process Development for Improved Adhesion in Thermo-Mechanically Stressed Textile-Elastomer-Compounds, 4/2011 - 6/2013
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Electro-sorting of plastic wastes as continuous process - The separation of
PS and ABS, 5/2010 - 6/2013
Dr. Frank Simon, Dept. Polymer Interfaces

Structured metal surfaces with implemented organic polymers for reproducible and durable adhesion joints, 5/2010 - 3/2013
Dr. Frank Simon, Dept. Polymer Interfaces

Tailored polysaccharide derivates with mixed substituents and their interaction in suspensions, especially in the paper production, 2/2009 - 11/2011
Dr. Simona Schwarz,
Dept. Surface Modification
Gudrun Petzold, Dept. Surface Modification

Increased product safety and reduced cleaning effort in the food industry by selection and application of innovative surface modification with special attention to the aging of surface and electrostatic interactions - ROME (cleaning and surface modifications), 5/2009 - 4/2011
Dr. Cornelia Bellmann, Dept. Polymer Interfaces

Stabilization of high-solid-dispersions with aggregated polyelectrolyte nanoparticles of varying hydrophobicity for the application in paper coating, 3/2009 - 2/2011
Dr. Simona Schwarz, Dept. Surface Modification
Dr. Stefan Zschoche, Dept. Polymer Structures

Development and Prototyping of Textil-Reinforced Rubber Components with Improved Heat Drain, 4/2008 - 9/2010
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Fast-curing shapeable powder coatings and gunless triboelectrical Al-pre-coating technology, 1/2008 - 12/2009
Dr. Michaela Gedan-Smolka, Dept. Melt Modification

Fatigue behaviour of nano-structured interphases in long glass fibre reinforced polyamides influenced by combined temperature, humidity, and UV loading, 9/2007 - 11/2009
Dr. Edith Mäder, Dept. Composite Materials

Development and improvement of electrostatic separation processes for mixed polymer scraps, 10/2006 - 6/2009
Dr. Frank Simon, Dept. Polymer Interfaces

Interactions of polyelectrolytes with hydrophobic functionalities in dispersions, 9/2007 - 5/2009
Dr. Simona Schwarz, Dept. Surface Modification

KOMET - Optical devices made from surface-modified polymers for medical engineering, 2/2007 - 1/2009
Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

Synthesis of polymeric flocculating powders by the high-viscosity technique, 7/2006 - 12/2008
Dr. Simona Schwarz, Dept. Surface Modification

Recycling or polyamide waste from different fractions of scrapped automotives and other scrap sources. Process development to conflate different produce material flows to produce high-quality materials, 11/2006 - 10/2008
Dr. Frank Taeger, Dept. Melt Modification

Application of waterborne paints on wood surfaces to minimize the wood´s swelling and to save energy, 9/2006 - 8/2008
Dr. Frank Simon, Dept. Polymer Interfaces

Stress crack stable powder coating duplex-materials. Development of a basic formulation to produce stress crack stable low-temperature clear powder coatings, 9/2006 - 6/2008
Dr. Michaela Gedan-Smolka, Dept. Melt Modification

 

Federal Ministry of Economics and Technology (BMWi)/ German Federation of Industrial Cooperative Research Associations "Otto von Guericke" (AiF) / Industrielle Gemeinschaftsforschung (IGF)

Funded by the Federal Ministry of Economics and Technology based on a decision of the Deutsche Bundestag

Simulation assisted tailored design of interphases in PPS-fiber polymer matrices (elastomers and thermoplastics) for high-performance composites, 1/2013 - 6/2015
Prof. Dr. Gert Heinrich, Dept. Elastomers

New procedural strategies to fabricate nonwoven materials for oil filtration applying analytical, textile-technological and application-oriented investigations, 5/2012 - 4/2015
Dr. Karina Grundke, Dept. Polymer Interfaces

Design, Cleaning and Regeneration of Polymer Particles in the Adsorption Deinking Process, 11/2012 - 4/2015
Dr. Simona Schwarz, Dept. Polyelectrolytes and Dispersions

Processing and properties of thermoplastics filled with graphen structures, 11/2012 - 10/2014
Dr. Petra Pötschke, Dept. Functional Nanocomposites and Blends

New functional surfaces for industrial applications by combination of switchable polymerbrushes with scratch resistant transparent coatings, 5/2010 - 10/2012
Dr. Petra Uhlmann, Dept. Nanostructured Materials

Novel conductive hybrid materials with carbon based fillers: material development and optimisation of injection moulding, 12/2009 - 5/2012
Dr. Petra Pötschke, Dept. Polymer Reaction und Blends

Innovative technology for efficient bonding of fiber enhanced thermosetting composites, 6/2009 - 5/2011
Dr. Anett Müller, Dept. Polymer Interfaces

Bundesministerium für Wirtschaft und Arbeit (BMWA)/ German Federation of Industrial Cooperative Research Associations "Otto von Guericke" (AiF) / Industrielle Gemeinschaftforschung (IGF)

Chemical processes employing polyamide to produce plastic Parts with flock-coated surfaces, 10/2005 - 7/2008
Dr. Jürgen Nagel, Dept. Melt Modification

Development of materials and technologies for powder-coated products from  wood-based materials suitable for post-forming, 4/2005 - 3/2007
Dr. Michaela Gedan-Smolka, Dept. Melt Modification

Structurally uniform polyelectrolyte complexes. Their use in the solid/liquid separation and further applications, 11/2003 - 8/2006 more...
Dr. Simona Schwarz, Dept. Surface Modification      
Dr. Stefan Zschoche, Dept. Polymer Structures

Novel PTFE-polyamide materials for wear resistant and maintenance-free slide bearings, 7/2004 - 6/2006
Dr. Dieter Lehmann, Dept. Melt Modification

Fundamentals of process engineering to produce advanced fiber-reinforced materials by on-line manufacturing, 11/2003 -3/2006  more ...
Dr. Edith Mäder, Dept. Composite Materials

Composites of polymers with carbon nanotubes: optimisation of processing conditions and properties, 11/2003 - 3/2006  more ...
Dr. Petra Pötschke, Dept. Polymer Reactions and Blends

 

Federal Ministry of Economics and Technology (BMWi)

Hydrolysis and corrosion resistant glass cord - glass fibre manufacturing and interphase design, 7/2008 - 6/2011
Dr. Edith Mäder, Dept. Composite Materials

Long term use of plastic jacket pipes - Part: polymer material aspects of ageing of plastic jacket pipes, 8/2007 - 5/2011
Prof. Dr.-Ing. Udo Wagenknecht, Dept. Processing
Prof. Dr. Gert Heinrich, Dept. Composite Materials

 

Federal Ministry of Economics and Technology (BMWi)

EXIST Transfer of Research: perfluorence - Oil-PTFE concentrate as an additive for lubricants such as oil, greases and waxes, 1/2012 - 6/2013
Thomas Engelhardt, Dept. Reactive Processing

Scholarship for the formation of QPOINT Composite GmbH a a spin-off the Leibniz Institute of Polymer Research Dresden, 1/2009 - 12/2009
Holger Orawetz, Dept. Composite Materials

Scholarship for the formation of CellDesign as a spin-off of the Leibniz Institute of Polymer Research Dresden, 3/2009 - 2/2010
Dr. Tilo Pompe, Dept. Biofunctional Polymer Materials

 

Federal Ministry of the Interior

Development of new, specific technology transfer strategies for material innovations, 7/2009 - 6/2011
Dr. Sina Burkert, Dept. Planning and Coordination of Research

 

Federal Ministry of Food, Agriculture and Consumer Protection (BMELV)

Spinbonded fleeces made from novel biologically degradable PLA homopolymers, co-polymers and blends. Melt spinning of novel biologically degradable PLA-homopolymers, co-polymers and blends, 5/2004 - 4/2006
Dr. Harald Brünig, Dept. Mechanics and Fibre Formation

 

Deutsche Forschungsgemeinschaft/German Research Council (DFG)

Tissue engineering of the human corneal endothelium: From primary cell culture to transplantation of highly functional cell sheets, 1/2015 - 12/2016
Dr. Mirko Nitschke, Inst. of Biofunctional Polymer Materials

Dynamic mechanical behaviour of the magneto-sensitive elastomers in a homogeneous magnetic field, 10/2013 - 9/2016
PD Dr. Marina Grenzer, Inst. Theory of Polymers

Mechanical stable anti-adhesive polymer surfaces of biomimetic structures, 1/2013 - 12/2015
Prof. Dr. Carsten Werner, Inst. of Biofunctional Polymer Materials

Theory of photo-mechanical properties of azobenzene polymers: light-induced deformation dynamics, 12/2012 - 11/2015
PD Dr. Marina Grenzer, Inst. Theory of Polymers

Design strategies and production processes of strength-optimised lightweight structures made of composites with variableaxial fibre architectures (OptiTex), 11/2013 - 10/2015
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Material Networks World Network - Switchable polymer interfaces for bottom-up stimulation of mamalian cells, 1/2012 - 10/2015
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials
Dr. Klaus-Jochen Eichhorn, Dept. Analytics

Polymer Microcapsules Prepared by Micellization of Block Copolymers for Catalytic Applications, 09/2014 - 09/2015
Dr. Andriy Horechyy, Dept. Nanostructured Materials

Simulation studies of polymer crystallization: Precursor-Phases, Reorganization and Self-Nucleation, 1/2009 - 2/2015
Prof. Dr. Jens-Uwe Sommer, Inst. Theory of Polymers

Control of the nanoscale morphology of bulk heterojunction solar cells via chemical assembly of low bandgap conjugated polymers on nanoparticle support, 6/2012 - 7/2014
Dr. Anton Kiriy, Dept. Nanostructured Materials

Tailoring of self-healing behavior and dimensional stability of rubber materials, 8/2011 - 7/2014
Dr. Frank Böhme
, Dept. Polymer Structures
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Tailoring Epoxy / Glass Composites: Characterization of Interphase Properties, 3/2008 - 3/2014
Dr. Edith Mäder, Dept. Composite Materials

Effect of the Interactions between Polymers and Solid Fillers on the Structure of Polymer-Filler; 4/2011 - 3/2014
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Adhesion in Model Polymer-Solid Interphases: Relation between the Nanoscopic Interphase and Macroscopic Adhesion, 4/2011 - 3/2014
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Entanglements and Dynamics in the Interphase Region, 4/2011 - 3/2014
Prof. Dr. Jens-Uwe Sommer, Dept. Theory of Polymers
Dr. Michael Lang, Dept. Theory of Polymers

Lithium- Sulfur-High Energy Batteries with Reversible Matrix-intercalated Sulfur Cathodes, 8/2010 - 12/2014
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Molecular analysis of the swelling behavior of polymer model networks, 4/2010 - 3/2014
Dr. Michael Lang, Dept. Theory of Polymers

Olefin-Based Homo- and Copolymers obtained by Catalytic Gas-phase, Slurry and Emulsion Polymerization, 12/2010 - 11/2013
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Hyperbranched polymers as chromatographic selectors, 11/2010 - 10/2013
Prof. Dr. Brigitte Voit, Dept. Polymer Structures
Dr. Dietmar Appelhans, Dept. Bioactive and responsive Polymers

Properties of grafted polymers under variation of solvent quality and their interaction with nano-particles, 10/2011 - 9/2013
Prof. Dr. Jens-Uwe Sommer, Dept. Theory of Polymers

Computer simulations of dendritic polyelectrolytes: Effects of solvent quality and adsorption, 6/2011 - 5/2013
Dr. Jaroslaw Klos, Dept. Theory of Polymers
Prof. Jens-Uwe Sommer, Dept. Theory of Polymers

Ion-exchange membranes for medium-temperature fuel cells (MTPEM), 6/2010 - 5/2013
Dr. Jochen Meier-Haack, Dept. Reactive Processing

Immobilization of isolated functionalities of thrombomodulin on surfaces for improved hemocompatibility and evaluation of their physiological relevance, 5/2010 - 4/2013
Dr. Manfred Maitz, Dept. Biofunctional Polymer Materials

Development and characterization of chemically coupled metal-plastic multilayer compounds - Investigation of the chemical adhesion mechanism, 4/2011 - 3/2013
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Graft copolymers with defined architecture based on multifunctional coupling agents - A new approach to novel thermoplastic elastomers, 4/2010 - 3/2013
Dr. Frank Böhme, Dept. Polymer Structures

Multifunctional cellulose based fibres, interphases and composites, 3/2011 - 2/2013
Prof. Edith Mäder, Dept. Composite Materials

Artificial matrices for tissue engineering basing on textile chitosan Scaffolds, 3/2010 - 2/2013
Dr. Frank Simon, Dept. Polymer Interfaces

Control of the nanoscale morphology of bulk heterojunction solar cells via chemical assembly of conjugated polymers on nanoparticle support, 11/2010 - 10/2012
Dr. Anton Kiriy, Dept. Nanostructured Materials

Nanoscale biopatterning using stimuli-responsive polymer surfaces and visible light, 9/2009 - 8/2012
Dr. Leonid Ionov, Dept. Nanostructured Materials

Fabrication and biomolecular functionalization of porous hollow poly(3 hydroxy butyrate) fibres for tissue engineering purposes, 6/2009 - 7/2012
Dr. Mirko Nitschke, Dept. Biofunctional Polymer Materials

Coatings with "Inverse Switching" Behaviour: New Applications of Core-Shell Hydrogel Particles, 8/2006 - 6/2012
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Theory of photo-induced deformation of azobenzene elastomers: structure-property relationships, 6/2010 - 5/2012
Dr. Marina Grenzer, Dept. Mechanics and Structures

Electrically conductive composites based on expanded graphite (EG) and thermoplastic polyurethanes (TPU), 6/2009 - 5/2012
Dr. Jürgen Pionteck, Dept. Polymer Reactions and Blends

Online-structure characterisation of elastomer blends during deformation and failure, 3/2009 - 2/2012
Dr. Konrad Schneider, Dept. Mechanics and Fibre Formation

Fracture mechanics and statistical mechanics of reinforced elastomer blends: Modelling the crack propagation in heterogeneous reinforced polymer materials at the mesoscopic-continuum mechanics interface (DFG research unit 597), 9/2005 - 2/2012
Prof. Dr. Gert Heinrich, Dept. Composite Materials

"Living" conjugated polymers: a new approach in engineering of complex materials for needs of organic electronics, 1/2010 - 12/2011
Dr. Anton Kiriy, Dept. Nanostructured Materials

Model-polymer-solid interphases: structure, properties and simulations, 6/2008 - 12/2011
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Metallo nanoparticles as optical antenna in photoactive polymer matrices, 1/2009 - 12/2011
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Materials and application oriented binder design for fixation of preform structures during processing, 11/2009 - 10/2011
Prof. Dr. Gert Heinrich, Dept. Composite Materials
Dr. Edith Mäder, Dept. Composite Materials

Generation of transplantable sheets of human corneal endothelial cells using thermo-reversible cell culture carriers and development of instruments for cell sheet transfer, 11/2009 - 10/2011
Dr. Mirko Nitschke, Dept. Biofunctional Polymer Materials

The motion and conformational properties of electrically charged polymer chains in solution under the influence of an electrical field, 11/2008 - 10/2011
Prof. Dr. Jens-Uwe Sommer, Dept. Theory of Polymers

Influence on the chain conformation of aromatic polyamidines and polyureas by the formation of supramolecular associates, 10/2009 - 9/2011
Dr. Frank Böhme, Dept. Polymer Reactions and Blends

Hydrogels based on PEG-heparin to stimulate the angiogenic growth, 3/2006 - 8/2011
Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

Sustainable, halogen-free flame retardancy of compact, reinforced and foamed polyester materials: synthesis, flame retardancy and mechanical properties, 8/2009 - 7/2011
Dr. Doris Pospiech, Dept. Polymer Structures

Order and phase behaviour of block copolymers containing magnetic nano-particles, 8/2008 - 7/2011
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials
Prof. Dr. Jens-Uwe Sommer, Dept. Theory of Polymers

Simulation of dendritic polyelectrolytes interacting with counter ions,
polymers and nano-particles, 5/2008 -  4/2011
Prof. Dr. Jens-Uwe Sommer, Dept. Theory of Polymers

Physical Characterization of Polymer-Filler Interfaces/Interphases and Large Scale Modelling of Rubber Composites, 3/2008- 2/2011
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Materials World Network: Insitu NMR Studies of Processing and Deformation of Polymer/Clay Nanocomposites, 10/2007 - 9/2010
Dr. Ulrich Scheler, Dept. Surface Modification

Self-assembly of ultrathin polyethyleneoxide (PEO) layers on surfaces - Chemical reactivity of lamella PEO interfaces and topochemical reactivity  of diacetylene modified PEO molecules, 7/2007 - 6/2010
Dr. Hans-Georg Braun, Dept. Biofunctional Polymer Materials

Block copolymer supramolecular assemblies functionalized with magnetic nanowires, 6/2008 - 5/2010
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Non-equilibrium flow at gradient surfaces: Fluid kinetics of droplets and particle motion, 5/2008 - 4/2010
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Nanostructured smart polymer materials with adaptive / responsive adhesion properties, 4/2008 - 3/2010
Dr. Alla Synytska, Dept. Polymer Interfaces

Characterization and modelling of fibronectin fibrillogenesis on defined polymer substrates, 5/2004 - 3/2010
Dr. Tilo Pompe, Dept. Biofunctional Polymer Materials

Dissipative Processes at Polymer Surfaces, 3/2008 - 2/2010
Dr. Konrad Schneider, Dept. Mechanics and Fibre Formation

Initation of blood coagulation - Evaluating the relevance of specific surface functionalities using self assembled monolayers, 12/2006 - 2/2010
Dr. Claudia Sperling, Dept. Biofunctional Polymer Materials

Materials World Network: Design of new responsive materials based on functional polymer brushes for smart tuning and sensoring of proteins and particles adsorption, 9/2006 - 8/2009
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials
Dr. Klaus-Jochen Eichhorn, Dept. Analysis

Nano-particles to stabilize emulsions, 9/2007 - 8/2009
Dr. Frank Simon, Dept. Polymer Interfaces

Co-operation in the DFG research centre:
From cells to tissues to therapies: Engineering the cellular basis of regeneration, 7/2005 - 6/2009
Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

In-situ characterization of interaction forces on polymer brushes, 2/2007 - 3/2009
Dr. Astrid Drechsler, Dept. Analysis
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Modelling and simulation of reactions in interfaces of polymer melts to form composites, 2/2007 - 1/2009
Prof. Dr. Gert Heinrich, Dept. Composite Materials
Dr. Dieter Lehmann, Dept. Melt Modification

Simulation of two-step cross linking reaction systems in melt Determination of bruttokinetic parameters, 10/2004 - 7/2008
Prof. Dr. Gert Heinrich, Dept. Composite Materials
Dr. Dieter Lehmann, Dept. Melt Modification

Confinement effects on the molecular dynamics of polymers with special architectures, 7/2006 - 6/2008
Dr. Klaus-Jochen Eichhorn, Dept. Analysis

Block copolymer Supramolecular assemblies for Magnetic nano-templating (SUPRAMAG), 6/2006 - 5/2008
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Low pressure plasma based preparation of structured switchable hydrogel films for physical and chemical stimulation of adherend cells, 8/2004 - 5/2008
Dr. Mirko Nitschke, Dept. Biofunctional Polymer Materials

Non-equilibrium flow at gradient surfaces: multi-component fluids, 5/2006 - 4/2008
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Molecular characterization and structural analysis of hyperbranched macromolecules, 10/2004 - 2/2008
Dr. Albena Lederer, Dept. Analysis

Spherical and rod-like nano-particles of well-defined size made from polyelectrolyte complexes, 1/2006 - 12/2007
Dr. Martin Müller, Dept. Surface Modification

Conductive polymer brushes: New electro- and photo-active molecular architectures, 11/2005 - 10/2007
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Development of toughness optimised biaxial fibre compounds of complex geometry, 12/2001 - 9/2007
Dr. Konrad Schneider, Dept. Mechanics und Fibre Formation
Dr. Edith Mäder, Dept. Composite Materials
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Polyelectrolyte conformations and phase transitions: Scattering, imaging and simulation studies, 6/2005 - 5/2007
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Chemical coupling of polymer materials with functionalized PTFE micropowders or modified polyethylene for the improvement of tribological properties, 5/2005 - 4/2007
Dr. Dieter Lehmann, Dept. Melt Modification

Synthesis of phosphorous-containing polymers for halogen-free flame retardancy of thermoplastics and high performance resins, 1/2005 - 12/2006
Dr. Doris Pospiech, Dept. Polymer Structures

Bio-adapted and resorbable bio-composites on the basis of textile-manufactured and structured scaffold, 12/2004 - 11/2006
Dr. Harald Brünig, Dept. Mechanics and Fibre Formation

Chemical modification of plastics for the improvement of bond strength by multi-component injection moulding, 5/2005 - 10/2006
Dr. Dieter Lehmann, Dept. Melt Modification

Fabrication of nanorods and nanotubes via templating based on the self-organization in the films of block copolymer supramolecular assemblies, 10/2004 - 9/2006
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Fabrication of polymer nanotubes by self-scrolling of strained polymer bilayer films, 10/2004 - 9/2006
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Non-equilibrium in nanoscale geometries: Influence of confinement and surface functionality, 8/2004 - 7/2006
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

New experimental concepts to study DNA dynamics in confined microstructures, 8/2004 - 7/2006
Dr. Hans-Georg Braun, Dept. Biofunctional Polymer Materials

Microstructuring of titanium surfaces for control of their interaction with cells, 8/2000 - 6/2006
Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

Nanoscale electronic devices via templating supramolecular polyelectrolytes (NEDSPE), 12/2003 - 5/2006
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Nanostructured MaterialsCorrelation of the molecular architecture and the deformation and fracture behavior in nano-structured block-copolymers, 5/2003 - 4/2006
Prof. Dr. Roland Weidisch, Dept. Mechanics and Fibre Formation

Scaling properties, effective size and solution properties of dendrimers, 11/2001 - 4/2006
Dr. Ulrich Scheler, Dept. Surface Modification
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Tuning adhesion by surface modification with mixed polymer brushes, 4/2003 - 3/2006
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Correlation of solid state and surface properties of nanostructured polymethylmethacrylmethacrylate diblock copolymers, 3/2004 - 2/2006
Dr. Doris Pospiech, Dept. Polymer Structures
Dr. Karina Grundke, Dept. Polymer Interfaces


DFG Collaborative Research Centres

On-line hybrid yarn spinning,  1/2004 - 12/2014
Dr. Edith Mäder, Dept. Composite Materials
Dr. Harald Brünig, Dept. Mechanics and Fibre Formation

Mechanisms of adhesion improvement and development of sized alkali-resistant glass fibres, 7/2002 - 6/2011
Prof. Edith Mäder, Dept. Composite Materials

Culture of mesenchymal stem cells on BMP-containing bio-artifical matrices to generate interactive niches for early hematopoietic stem cells, 7/2007 - 6/2009
Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

Treatment of anisotropic materials’data and models for dimensioning component parts with production-relevant adjustment of the interphase properties, 6/2006 - 12/2008
Dr. Edith Mäder, Dept. Composite Materials

Composite MaterialsPhoto-initiated cross-linking on polymer surfaces to produce gradient properties for combinatorical applications in adsorption processes,  1/2005 - 12/2007
Prof. Dr. Gert Heinrich, Dept. Composite Materials
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Synthesis, interphase analysis and layer formation of self-assembling molecules with coupling properties, 1/2005 - 12/2007
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Mechanics and StructureSynthesis of segmented functionalized polymers with variable surface morphology by controlled radical polymerization, 8/1999 - 12/2007
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Synthesis of reactive polymers to produce gels with controlled properties, 1/1999 - 12/2007
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Interactions of highly functionalized hyperbranched polymers with model proteins, 1/1999 - 12/2007
Dr. Klaus-Jochen Eichhorn, Dept. Analysis
Dr. Karina Grundke, Dept. Polymer Interfaces

Modification of interphases in heterogeneous blends, 1/1999 - 12/2007
Dr. Jürgen Pionteck, Dept. Polymer Reactions and Blends
Dr. Petra Pötschke, Dept. Polymer Reactions and Blends
Dr. Lothar Jakisch, Dept. Polymer Reactions and Blends

Enantio-selective layers and particles made from complexes of chiral polyelectrolytes, 1/1999 - 12/2007
Dr. Martin Müller, Dept. Surface Modification

European Union

SOMATAI - Soft Matter at Aqueous Interfaces, 10/2012 - 9/2016
Prof. Dr. Jens-Uwe Sommer, Inst. Theory of Polymers

WOOD-FLARETCOAT - Flame retardant coatings based on nano-magnesium hydroxide, huntite and hydro-magnesite for wood applications, 1/2014-12/2015,
Prof. Dr.-Ing. Udo Wagenknecht, Dept. Processing

NephroTools - The potential of human kidney stem/progenitor cells for use in drug discovery and regenerative therapy programmes, 12/2011 - 11/2015
Prof. Dr. Carsten Werner, Inst. of Biofunctional Polymer Materials

LORRY - Development of an innovative low rollling resistance truck tyre concept in combination with a full scale simulation tool box for tyre performance in function of material and road parameters, 11/2012 - 10/2015
Prof. Dr. Gert Heinrich, Dept. Mechanics and Structure

ECNP-GROWTH Consolidation of the european centre for nanostructured polymers, 2/2012 - 1/2015
Prof. Dr. Brigitte Voit, Dept. Polymer Struktures

The Gender in Science and Technology LAB – GENIS LAB, 01/2011 - 12/2014
Prof. Dr. Brigitte Voit, Dr. Victoria Albrecht

EMBROIDERY - Development of energy efficient / lightweight composite parts and tooling based on Tailored Fibre Placement technology / self heating technology, 01/2011 - 12/2012
Axel Spickenheuer, Dept. Composite Materials

AngioScaff - Angiogenesis-inducing Bioactive and Bioresponsive Scaffolds inTissue Engineering, 12/2008 - 11/2012
Prof. Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

POCO - Carbon Nanotube Confinement Strategies to Develop Novel Polymer Matrix Composites, 11/2008 - 10/2012
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

MULTIHYBRIDS - Innovative sensor-based processing technology of nanostructured multifunctional hybrids and composites, 1/2007 - 12/2010
Dr. Dieter Fischer, Dept. Analysis

INTELTEX - Intelligent multi-reactive textiles integrating nano-filler based CPC-fibres, 9/2006 - 8/2010
Dr. Petra Pötschke, Dept. Polymer Reactions and Blends

KidStem - Developing a stem cell based therapy to replace nephrons lost through reflux nephropathy, 9/2006 - 8/2010
Prof. Carsten Werner, Dept. Biofunctional Polymer Materials

AMBIO - Advanced nanostructured surfaces for the control of Biofouling (Integrated project), 3/2005 - 2/2010
Prof. Carsten Werner, Dept. Biofunctional Polymer Materials

NANOSTIM - Marie Curie Fellow from the European Commission within the Transfer of Knowledge Project between the Institute of Coal Chemistry, Polish Academy of Sciences, Gliwice, Poland, 9/2004 - 9/2008
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

FLARETPOL – Development of an innovative, cost-effective technology to produce halogen-free, high-performance flame retarded poliolefins (Specific Targeted Research Project), 4/2005 - 9/2008
Prof. Dr.-Ing. Udo Wagenknecht, Dept. Processing

NANOFUN-POLY- Nanostructured and functional polymer-based materials and nanocomposites (Network of Excellence), 6/2004 - 5/2008
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

SC&CR - Application and Process Optimization of Human Stem Cells for Myocardium Repair (Specific Targeted Research Project), 2/2004 - 1/2008
Prof. Carsten Werner, Dept. Biofunctional Polymer Materials

NBB-HYBRIDS - New hybrids nanocomposites from functional nanobuilding blocks "NBB-HYBRIDS" (Research Training Networks), 9/2002 - 8/2006
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Saxon State Ministry of Science and the Fine Arts (SMWK)

Modeling and investigation of structure evolution of filled elastomers under uniaxial elongation, 8/2008 - 12/2008
Dr. Bernd Lauke, Dept. Mechanics and Fibre Formation

New spectroscopic approaches for characterisation of particles in polymer composites and blends, 10/2007-12/2007
Dr. Klaus-Jochen Eichhorn, Dept. Analysis

Experimental investigation and numerical simulation of nano-polymeric layers in the vicinity of active silica or carbon surfaces, 9/2007-12/2007
Dr. Bernd Lauke, Dept. Mechanics and Fibre Formation

Development and verification of a material model of elastomers, which takes into account dissipative losses, finite deformations and softening after loading, 10/2007-12/2007
Dr. Bernd Lauke, Dept. Mechanics and Fibre Formation

Aluminium with durable supra-hydrophobic surface properties, 6/2004 - 1/2007
Dr. Frank Simon, Dept. Polymer Interfaces

Investigation of the network structure of nano-fillers in elastomer materials and characterization of the structure and properties of thin elastomer layers on carbon, 3/2006 - 12/2006
Dr. Bernd Lauke, Dept. Mechanics and Fibre Formation

Structural characterization of polymer blends, porous and composite materials by combination of optical methods, 10/2006 - 12/2006
Dr. Klaus-Jochen Eichhorn, Dept. Analysis

Application of dendritric structures to produce permeable nano-particles for biomedical applications by non-covalent interactions, 5/2006 - 10/2006
Dr. Dietmar Appelhans, Dept. Polymer Structures

Surface layers made from chitosan and chitosan partly converted into chitin - Their wetting behavior and interactions with surfactants, 6/2006 - 8/2006
Dr. Frank Simon, Dept. Polymer Interfaces
Dr. Victoria Dutschk, Dept. Polymer Interfaces

Novel flocculation agents on the base of polyelectrolyte complexes containing NaPAMPS, 5/2006 - 7/2006
Dr. Simona Schwarz, Dept. Surface Modification

Structure-properties relationship between bio-functionalized surfaces and cells. Surface functionalization of poly(hydroxyalkanolate)-scaffolds to control the vascularization, 1/2004 - 12/2005
Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

Immobilization the membrane receptor RAGE as bio-sensor to measure non-enzymatic glycation products in foodstuff and blood, 7/2001 - 12/2005
Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

 

Sächsische Aufbaubank (SAB)

Reconstruction of extensive cranial bone defects by using three dimensional textile scaffolds, 10/2008 - 9/2011
Annette Breier, Dept. Composite Materials

Development of innovative and effective systems for the halogen-free flame retardance and understanding of the flame mechanism of plastics
subproject: Halogen-free flame retardance in plastics with new phosphorus-containing nanocomposites, 7/2007 - 12/2009
Dr. Doris Pospiech, Dept. Polymer Structures

Development of high-density memory systems for the GHz data transfer,
subproject: Development of a method for the highly precise self-alignment of chips in the sub-micrometer range, 7/2008 - 12/2008
Dr. Karina Grundke, Dept. Polymer Interfaces

Design and Development of an Implant for Long Bone Defects with Integrated Controlled Drug Release Based on Resorbable Textile Scaffolds, Examplyfied by Antibiotics, 8/2006 - 11/2007
Annette Breier, Dept. Composite Materials

Dialysis membranes made from innovative, hydrophilically modified polymers on the base of polysulphones
subproject: Synthesis and characterization of new hydrophilically modified polysulphone polymers, 1/2006 - 10/2007
Dr. Doris Pospiech, Dept. Polymer Structures

A new plastics pipe system - Development and applikation of polymer analytical methods in order to evaluate the industrial relevant materials, 7/2005 - 3/2007
Prof. Dr. Michael Stephan, Dept. Melt Modification

Modification of reactive dialysis membranes
subproject: Covalent immobilisation of biological active substances on reactive dialysis membranes, 7/2004 - 6/2006
Dr. Stefan Zschoche, Dept. Polymer Structures

Development of thermo-curable masses based upon polymer composites, application equipment and technology as prototypes for novel chemical fixings, 3/2004 - 2/2006
Dr. Michaela Gedan-Smolka, Dept. Melt Modification

 

German Academic Exchange Service (DAAD)

Glass Fibres with Multi-functional Properties for Defect Monitoring in FRP Structures, 1/2015 - 12/2016
Prof. Dr. Edith Mäder, Dept. Composite Materials

Application of the Asymmetrical Flow Field-Flow Fractionation (AF4) for Polymeric Drug Delivery Systems, 5/2014 - 12/2015
PD Dr. Albena Lederer, Dept. Analytics

Nano-objects interacting with lipid membranes, 1/2014 - 12/2015
Prof. Dr. Jens-Uwe Sommer, Inst. Theorie der Polymere

Sensors based on block-copolymer nanocomposites, 1/2013 - 12/2014
Dr. Jürgen Pionteck, Dept. Functional Nanocomposites and Blends

Stress and strain reinforcement in polymer melts and polymer networks filled with spherial and anisometric particles, 1/2012 - 12/2013
Dr. Marina Grenzer, Dept. Mechanics und Structure

Influence of molecular characteristics of PAMPSA on its interaction with CTAB, 10/2012 - 3/2013
Dr. Simona Schwarz, Dept. Polyelectrolytes und Dispersionen

In-situ preparation of BCP-CNT and BCP-EG nanocomposites and their characterization - a comparative study, 10/2012 - 3/2013
Dr. Jürgen Pionteck, Dept. Functional Nanocomposites and Blends

Charakterization of graphene-ionic liquid gel and their application in rubber compounding, 9/2012 - 3/2013
Prof. Dr. Edith Mäder, Dept. Composite Materials

Development of optically transparent smart rubber composites with LDH, 9/2012 - 3/2013
Prof. Dr. Edith Mäder, Dept. Composite Materials

Super TPVs based on silicone rubber and polyamide by electron inducec reactive processing, 9/2012 - 3/2013
Dr. Sven Wießner, Dept. Processing

New starch derivates as flocculants and binding agents, 11/2012 - 1/2013
Dr. Simona Schwarz, Dept. Polyelectrolytes und Dispersionen

Multifunctional wound-care dressings, 10/2012 - 1/2013
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Donor Acceptor alternation in all-conjugated fully functionalized block copolymers by living chain growth Kumada condensation: Application in Optoelectronics, 12/2011 - 11/2012
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Novel polymer composites based on graphene structures in polymer blends, 5/2012 - 7/2012
Dr. Petra Pötschke, Dept. Polymer Reactions und Blends

Stimuli-Responsive (bio)nanocomposite coatings, 5/2012 - 7/2012
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Anti microbial hybrid elastomers filled with modified Halloysite Nanotubes, 10/2011 - 5/2012
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Ionic liquid assisted dispersion of graphene nanoplatelets in elastomer matrix, 10/2011 - 5/2012
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Application of Layered Double Hydroxide (LDH) as a New Crosslinking System in Diene Elastomers, 10/2011 - 5/2012
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Development of Polymer Nanocomposites based on Halloysite Nanotubes, 10/2011 - 5/2012
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Effect of particle size and particle size distribution on the fracture toughness of polypropylene reinforced with quartz particles, 2/2012-4/2012
Dr. Bernd Lauke, Dept. Mechanic und Structure

Glycopolymer-based polyelectrolyte multilayers and nanoparticles for biomedical applications, 4/2011 - 3/2012
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Polymer-surfactant complexes (PSC), characterization and analysis to coagulation on a model system, 9/2009 - 12/2009
Gudrun Petzold, Dept. Surface Modification

New organic/inorganic silica/polymer-hybrids; synthesis and relaxation behaviour, 1/2009 - 12/2009
Dr. Doris Pospiech, Dept. Polymer Structures

Thermosets with improved toughness by using new functional hyperbranched precursors, 1/2008 - 12/2009
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Electrically and thermally conductive nanocomposites based on the nanostructured graphite, 1/2008 - 12/2009
Dr. Jürgen Pionteck, Dept. Polymer Reactions und Blends

Development and characterization of novel nano-structured di-coblock polymers, 1/2007 - 12/2008
Dr. Doris Pospiech, Dept. Polymer Structures

Functionalized carbon nano-tubes – an innovative filler for advanced electrically conductive polymer nano-composite materials, 1/2006 - 12/2007
Dr. Jürgen Pionteck, Dept. Polymer Reactions and Blends

Polysaccharides-Based Multilayers as Antifouling and Antibacterial Coatings for Biomedical, 7/2007 - 9/2007
Dr. Frank Simon, Dept. Polymer Interfaces

Synthesis of new switchable functional grafted co-polymers made from N-iospropylacrylamide and 2-oxazolone, 2/2007 - 4/2007
Dr. Stefan Zschoche, Dept. Polymer Structures

Adsorption kinetics and morphology of polyelectrolytes; dependence on ph and salt concentration, 1/2006 - 12/2006
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Synthesis of segmented block copolymers based on soft liquid polybutadiene and natural rubber segments and hard high performance polymer segments using bifunctional coupling agents, 10/2005 - 9/2006
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Development of ultrahydrophobic surfaces by nanostructured polymers, 1/2004 - 6/2006
Dr. Doris Pospiech, Dept. Polymer Structures

Hyperbranched/dendritic polymers used as biocompatible and bioactive coating, 10/2005 - 5/2006
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Physiko-chemical properties of surfactant-polymer solutions, 10/2005 - 3/2006
Gudrun Petzold, Dept. Surface Modification

Novel hyperbranched oligomers and their applications in the photo-polymerization of coating systems, 1/2004 - 12/2005
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Other Organisations

Honda Initiation Grant Europe

Development of new hybrid yarns based on engineering thermoplastics for advanced composites and light weight applications, 4/2011 - 2/2012
Prof. Dr. Edith Mäder, Dept. Composite Materials

Dutch Polymer Institute

Sustainable elastomers and thermoplastics by short-cut fiber reinforcement, 3/2008 - 2/2011
Prof. Dr. Gert Heinrich, Abt. Verbundwerkstoffe

Synthesis of Well Defined Branched Architectures for Method Development in Polymer Characterization -BranChar-, 7/2006 - 6/2010
Dr. Albena Lederer, Dept. Analysis

Alexander von Humboldt Foundation

Development of highly transparent and conducting graphene/CNT hybrid films, 1/2014 - 12/2015
Prof. Qingbin Zheng, Abt. Verbundwerkstoffe

Correlation between Morphology and Mechanical Properties in Nanocomposites Based on Thermoplastic Elastomers (TPEs) and Nanofillers/Nanofibres, 05/2015 - 08/2015
Prof. Dr. Kinsuk Naskar, Abt. Elastomere

Fabrication of self-folding polymer films triggered by the UV light, 1/2013 - 11/2014
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Preparation and performance of functional poly (vinylidene flouride) porous membranes, 4/2014 - 6/2014
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Electron Beam Irradiation of Microwave Treated Olive Husk Powder, 6/2011-9/2013
Prof. Dr. Udo Wagenknecht, Abt. Verarbeitungsprozesse

Active membranes for waste water treatment for removal of organic components, 5/2011 - 4/2013
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Modelling of interface reactions in PET/PEN blends in a twin screw extruder, 4/2012 - 11/2012
Prof. Dr. Udo Wagenknecht, Dept. Processing

Preparation and charakterization of fluorinated hyperbranched (hb) poly(aryleneehter)s with crosslinkable paracyclophane-structur elements, 5/2012 - 7/2012
Prof. Dr. Brigitte Voit, Dept. Polymer Structure

Nano-TPVs (Thermoplastic Elastomers) by Electron Beam (EB) Induced Reactive Processing: Synthesis, Characterization and Properties, 5/2012 - 7/2012
Prof. Dr. Udo Wagenknecht, Dept. Processing

Fibers with Sensory Capabilities for Advanced Warning of Defects in Composites; 5/2010 - 4/2012
Prof. Dr. Edith Mäder, Dept. Composite Materials

The Construction of Biofunktionalized and Stimuli Responsive Polymersomes, 12/2011 - 3/2012
Prof. Dr. Brigitte Voit, Dept. Polymer Strukture

Processing and Application of a Multi-functional Fire Retarded Nanocomposite - New Generation of Environmental Friendly Fire Safe Polymer Material, 2/2011 - 1/2012
Prof. Dr. Udo Wagenknecht, Dept. Processing

The Construction of Biofunctionalized and Stimuli Responsive Polymersomes, 12/2010 - 11/2011
Prof. Dr. Brigitte Voit, Abt. Polymerstrukturen

Modelling of interface reactions in PET/PEN blends in a twin screw extruder, 4/2011-11/2011
Prof. Dr. Udo Wagenknecht, Abt. Verarbeitungsprozesse

Nanoporous Hyperbranched Polyphenylene for Ultra Low-K Application, 6/2010 - 5/2011
Prof. Dr. Brigitte Voit, Abt. Polymerstrukturen

Nanostructured Block Copolymer Templates for Gas Separation, 10/2010 - 3/2011
Prof. Dr. Manfred Stamm, Abt. Nanostrukturierte Materialien

Structure-property correlations and deformation-mediated surperstructures of bipolymer PLLa, 4/2010 - 3/2011
Prof. Dr. Manfred Stamm, Abt. Nanostrukturierte Materialien

Ordered block copolymer multilayer nanocomposite films with multiple functionalities, 5/2009 - 1/2011
Prof. Dr. Manfred Stamm, Abt. Nanostrukturierte Materialien

Nanoporous Hyperbranched Polyphenylene for Ultra Low - k Application, 6/2009 - 5/2010
Prof. Brigitte Voit, Dept. Polymer Structures

Gels mimicking antibodies in their selective recognition of different molecular forms of human growth hormone, 10/2005 - 1/2010
Dr. Carsten Werner, Dept. Biofunctional Polymer Materials

Fabrication of highly ordered nanostructured block copolymer templates, 11/2007 - 10/2009
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Study on the application opportunities of microfibrillar composites (MFC) in particular for biomedical uses, 7/2009 - 9/2009
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Reinforced thermoplastic elastomers (TPEs), 1/2009 - 6/2009
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Interface Molecular Engineering of Polymer-Carbon Nanotube Composites, 6/2008 - 5/2009
Dr. Petra Pötschke, Dept. Polymer Reactions and Blends

Synthesis and characterization of novel hyperbranched polymers for low dielectric constant applications, 5/2008 - 7/2008
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

UV cured nanostructured thermoset polymeric coatings from self-assembled block copolymers/epoxy resin mixtures, 9/2007 - 2/2008
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Field theoretical approad and numerical studies of interactions of complex macromolecular systems with surfaces and interfaces, 3/2007 - 2/2008
Prof. Dr. Jens-Uwe Sommer, Dept. Theory of Polymers

Synthesis and characterization of novel hyperbranched polymers for low dielectric constant application, 5/2007 - 7/2007
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Polymerisation of composite materials under space environment, 3/2006 - 3/2006
Dr. Bernd Lauke, Dept. Mechanics and Fibre Formation

VolkswagenStiftung/Volkswagen Foundation

New surface functionalities by process-integrated surface modification of polyolefins, 4/2010 - 3/2012
Prof. Dr. Gert Heinrich, Dept. Composite Materials

Fast reaction mechanismen for the production of surface modified parts of polycondensates by injection molding, 4/2007 - 3/2010   more ...
Prof. Dr. Gert Heinrich, Dept. Composite Materials
Dr. Dieter Lehmann, Dept. Melt Modification

Active spatio-temporal control of biomolecular transport systems using stimuli-responsive polymers, 7/2006 - 7/2009
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Deutsche Kautschuk-Gesellschaft e.V.

Novel thermoplastic elastomers on the base of multi-graft- and block-graft copolymers and electron-beam cross-linking, 7/2005 - 6/2006
Prof. Dr. Roland Weidisch, Dept. Mechanics and Fibre Formation

Leonardo da Vinci Program

Basic investigations for the development of functional surfaces with powder coatings materials, 10/2005 - 6/2006
Dr. Michaela Gedan-Smolka, Dept. Melt Modification

NATO Science Programme

Immobilization of chitosan on polymer substrates and its controlled conversion into chitin, 1/2006 - 12/2006
Dr. Frank Simon, Dept. Polymer Interfaces

Bayrische Forschungsstiftung

Hybrid composites for light weight structures out of recycled glass and polymers, 4/2007 - 3/2010
Dr. Edith Mäder, Dept. Composite Materials