|
Authors
|
Krause, B. ; Kroschwald, L. ; Pötschke, P.
|
|
Title
|
The influence of the blend ratio in PA6/PA66/MWCNT blend composites on the electrical and thermal properties
|
|
Date
|
11.01.2019
|
|
Number
|
56142
|
|
Abstract
|
It is known that the percolation threshold of polyamide 6 (PA6)/multiwalled carbon nanotube (MWCNT) composites is higher than that of PA66/MWCNT composites under the same mixing conditions and melt viscosity. A series of blends of PA6 and PA66 containing 1 wt % MWCNTs have been prepared to investigate this phenomenon. At contents up to 20 wt % PA66, the blends were not electrically conductive. The electrical resistivity dropped to 109 Ohm·cm for PA66/PA6 30/70 blends. The resistivity was 105 Ohm·cm at higher PA66 contents. Differential scanning calorimetry was used to investigate the thermal behavior of blends. The glass transition temperature was almost constant for all blend compositions, indicating that the amorphous phases are miscible. The MWCNT addition influenced the crystallization of PA66 much more than the PA6 crystallization. A heterogeneous crystallization of the polyamide in PA66/PA6 blends took place, and the MWCNTs were mainly localized in the earlier crystallizing PA66 phase. Thus, the formation of the nanotube network and thus the electrical volume resistivity of the PA6/PA66 blends with 1 wt % MWCNTs is significantly influenced by the crystallization behavior. In PA66/PA6 blends up to 60 wt %, the more expensive PA66 can be replaced by the cheaper PA6 while retaining its electrical properties.
|
|
Publisher
|
Polymers
|
|
Wikidata
|
|
|
Citation
|
Polymers 11 (2019) ID122
|
|
DOI
|
https://doi.org/10.3390/polym11010122
|
|
Tags
|
polyamide carbon nanotubes melt-mixed blends electrical properties crystallinity
|
