Menü

HIGHLIGHTED: Major Research Networks

See here for a list of major research networks and projects with participation of the IPF sponsored by different organizations and bodies (selection)

 

Publically funded projects listed according to sponsoring organization or body....

Federal Ministry of Education and Research (BMBF)

Leibniz Research Cluster:  (Bio-)Synthetic Multifunctional Micro-Production Units - New Ways for Drug Development, 4/2015 - 3/2020
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Zwanzig20-Partnership for innovation. RESPONSE: Partnership for innovation in implant technology, 1/2014 - 12/2014, 11/2015 - 10/2018
Prof. Dr. Carsten Werner, Inst. of Biofunctional Polymer Materials

Development of electrically and thermally conductive plastic compounds with functionalities for use in heat exchangers and fuel cells
sub-project: 2-component-injection moulding, development and characterisation of material, 3/2016 - 8/2018
Dr. Beate Krause, Dept. Functional Nanocomposites and Blends

EISAB - Active Ice-repellent Surfaces for wind power plants, 9/2014 - 8/2017
Dr. Petra Uhlmann, Dept. Nanostructured Materials

Optimization of the required amount of water and polymer in the dissolving power for polyelectrolytes using the example of paper industry with attention to PAA, 8/2015 - 7/2017
Dr. Simona Schwarz, Dept. Polyelectrolytes and Dispersions

NanoStruk - Super-hydrophobic and oleophobic coatings with nano-paints on stainless steel, 10/2014 - 9/2016
Dr. Cornelia Bellmann, Dept. Polymer Interfaces

Twenty20- Carbon Concrete Composite C3; Coatings, Building with Reinforcing Carbon Structures for Concrete
sub-project: Alkali and thermal resistant epoxy and PU coatings for texile reinforcing structures term, 05/2015 - 10/2016
Dr. Christina Scheffler, Dept. Composite Materials

In-line modification of 3D plastic components, 9/2013 - 8/2016
Dr. Michaela Gedan-Smolka, Dept. Reactive Processing
Dr. Uwe Gohs, Dept. Composite Materials

Development of conductive polymer composites with improved processability and impact resistance/ bending strength, 8/2014 - 7/2016
Dr. Petra Pötschke, Dept. Functional Nanocomposites and Blends

Excellency and technological application of battery research - ExcellentBattery, 6/2013 - 5/2016
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Federal Ministry of Food and Agriculture

Funded by the Federal Ministry of Food and Agriculture based on a decision of the Deutsche Bundestag

The development of bio-based hot melt adhesives and their use in paper and cardboard packaging, 9/2015 - 2/2018
Dr. Simona Schwarz, Dept. Polyelectrolytes and Dispersions

Biobased resins for chemical anchor systems, 10/2014 - 9/2017
Dr. Klaus Jähnichen, Dept. Polymer Structures

Federal Ministry for Economic Affairs and Energy (BMWi)/ in the context of Zentrales Innovationsprogramm Mittelstand (ZIM)

ESIR-hood / Easy-to-Clean Coating at Stainless Steel  Surfaces Using Switchable Wettability, 8/2015-7/2017
Dr. Petra Uhlmann, Dept. Nanostructured Materials

Federal Ministry for Economic Affairs and Energy (BMWi)/German Federation of Industrial Cooperative Research Associations "Otto von Guericke" (AiF) / in the context of Zentrales Innovationsprogramm Mittelstand (ZIM)

Development of actuator based flexible flaps for wind energy plant rotor blades and application on a 3 m test section for experimental validation;
Subproject: Development of a flexible flap connection segment for wind energy plant rotor blades, 12/2014 - 11/2016
Dr.-Ing. Axel Spickenheuer, Dept. Composite Materials

Sustainable biocatalytic reduction of persistent organic compounds for better wastewater quality; Development of effectively acting anti-biofouling coatings of enzyme-doted supports for biocatalytic reduction of persistent organic compounds from wastewater, 7/2014 - 6/2016
PD Dr. Doris Pospiech, Dept. Polymer Structures

Wear-resistant fiber ropes by use of novel lubricants and coating materials; Development of special PTFE-containing additives for the preparation of new rope lubricants, 5/2014 - 5/2016
Dr. Thorsten Hoffmann, Dept. Reactive Processing

Development of a testing device for fibre-matrix adhesion strength - Materials and processing implementations, 6/2014 - 5/2016
Prof. Dr. Edith Mäder, Dept. Composite Materials

Development of a process for the preparation of permanent antistatic semi-finished products from ultrahigh molecular weight polyethylene (UHMW-PE) without using carbon-based additives
Subproject: Development of polymeric antistatic additives for the permanent antistatic preparation of UHMW-PE, 2/2014 - 1/2016
Dr. Antje Taeger, Dept. Reactive Processing

Federal Ministry for Economic Affairs and Energy (BMWi)/ German Federation of Industrial Cooperative Research Associations "Otto von Guericke" (AiF) / Industrielle Gemeinschaftsforschung (IGF)

Development of compliant highly loaded elastomer components based on hybrid yarns with adjustable bi-modular properties, 12/2015 - 5/2018
Jun.-Prof. Dr. Sven Wießner, Dept. Elastomers

Adaptive Polymer Brush Systems for Industrial Processes for a Sustainable Surface Modification of Foil, 6/2015 - 11/2017
Dr. Petra Uhlmann, Dept. Nanostructured Materials

Development of a simulation-based technology for the fabrication of load-adapted, fiber-based implants with defined and locally variable stiffness, 8/2015 - 10/2017
Dr. Axel Spickenheuer, Dept. Composite Materials

Simopoli - Smart Infrared Curing for Compact Powder-Precoating-Lines, 10/2015 - 9/2017
Dr. Michaela Gedan-Smolka, Dept. Reactive Processing

Development of a procedural approach for a switchable functionalisation of paper surfaces using the example of antimicrobial finishing, 4/2015 - 9/2017
Dr. Petra Uhlmann, Dept. Nanostructured Materials

Gas permeation barrier layers on the inner side of food packages by atmospheric pressure plasma, 1/2015 - 6/2017
Dr. Anett Müller, Dept. Polymer Interfaces

Optilyt - Development of tailor-made separator/electrode systems for optimized electrolyte filling in lithium ion batteries, 10/2014 - 9/2016
PD Dr. Doris Pospiech, Dept. Polymer Structures

PreFiHy - Prefinished metal polymer hybrid parts, 9/2014 - 8/2016
Dr. Michaela Gedan-Smolka, Dept. Reactive Processing
Dr. Ines Kühnert, Dept. Processing

Thermoplastic Parts with Permanent Electrical Discharging Surface Layer, 2/2014 - 1/2016
Dr. Jürgen Nagel, Dept. Reactive Processing

Deutsche Forschungsgemeinschaft/German Research Council (DFG)

Structure-property-correlations in nanostructured block copolymer/carbon nanotube composites with selective localization of the nanofillers within the phase morphology, 5/2015 - 4/2019
Dr. Ulrike Staudinger, Dept. Functional Nanocomposites and Blends

Bridging molecular orientation and isomerization state with macro-deformation in photoactive azobenzene-containing materials, 3/2016 - 2/2019
Dr. Olga Guskova, Inst. Therory of Polymers

Gene expression in microgels: The effect cytosol crowding and cytoplasm organization on cellular function, 2/2016 - 1/2019
Dr. Julian Thiele, Dept. Nanostructured Materials

Precise synthesis of well-defined electron conducting and donor-acceptor semiconducting copolymers for organic electronics, 10/2015 - 9/2018
Dr. Anton Kiriy, Dept. Polymer Structures

In-situ Spectroscopic Investigations of High Energy Li-S Batteries Based on New Carbon Cathodes, 8/2015 - 7/2018
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Acid gelation of enzymatically cross-linked caseins: from molecular level to network formation, 8/2015 - 7/2018
PD Dr. Albena Lederer, Dept. Analytics

Nanoscale biopatterning using stimuli-responsive polymer surfaces and visible light /
3D Bio-Patterning using self-folding polymer films, 9/2009 - 5/2018
Dr. Leonid Ionov, Dept. Nanostructured Materials
Dr. Alla Synytska, Dept. Polymer Interfaces

Thermographic Characterisation of Deformation and Fracture of Semicrystalline Polymers as Basis for Constitutive Modelling of the Material Behaviour, 3/2016 - 2/2018
Dr. Konrad Schneider, Dept. Mechanics and Structure

Cell-instructive hydrogel gradient arrays, 3/2015 - 2/2018
Dr. Uwe Freudenberg, Inst. of Biofunctional Polymer Materials
Dr. Ralf Zimmermann, Inst. of Biofunctional Polymer Materials

Branching design in polyolefins by catalyst variation. Theory meets experiment, 2/2015 -  1/2018
PD Dr. Albena Lederer, Dept. Analytics
Prof. Dr. Jens-Uwe Sommer, Inst. Theory of Polymers

Frictional properties of complex polymer brushes, 1/2016 - 12/2017
Modification of the nanotribological properties of polymer brushes by embedded molecules, polydispersity and electrical charge, 11/2011 - 12/2015
Dr. Torsten Kreer, Inst. Theory of Polymers

Multifunctional materials based on cellulose and graphene, 1/2015 - 12/2017
Dr. Haisong Qi, Dept. Composite Materials

High-performance and lightweight Graphene-CFRP-CFRP compressed Hydrogen storage tank for aerospace applications, 12/2015 -11/2017
Prof. Dr.-Ing. Udo Wagenknecht, Dept. Processing

Ordering and Helical Structures of Nanoparticles in Block Copolymers, 8/2014 - 9/2017
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials
Prof. Dr. Jens-Uwe Sommer, Inst. Theory of Polymers

Modeling of strongly coupled magneto-mechanical behaviour in magneto-sensitive elastomers, 7/2014 - 6/2017
PD Dr. Marina Grenzer, Inst. Theory of Polymers

Self-healing elastomers based on bromobutyl rubber with reversible interacting groups, 7/2014 - 6/2017
Dr. Frank Böhme, Dept. Polymer Structures
Prof. Dr. Gert Heinrich, Dept. Elastomers

Synthesis and Self-Assembly of Stimuli-Responsive Core-Shell Janus Particles, 5/2014 - 4/2017
Dr. Alla Synytska, Dept. Polymer Interfaces

Dresden initiative for bioactive interfaces & materials, 5/2014 - 4/2017
Prof. Dr. Carsten Werner, Inst. of Biofunctional Polymer Materials

Tissue engineering of the human corneal endothelium: From primary cell culture to transplantation of highly functional cell sheets, 1/2015 - 12/2016
Dr. Mirko Nitschke, Inst. of Biofunctional Polymer Materials

Dynamic mechanical behaviour of the magneto-sensitive elastomers in a homogeneous magnetic field, 10/2013 - 9/2016
PD Dr. Marina Grenzer, Inst. Theory of Polymers

Improvement of Lab-Predictions with respect to Crack Growth and Wear in Tyre Treads, 3/2013 - 2/2016
Prof. Dr. Gert Heinrich, Dept. Elastomers

DFG Collaborative Research Centres

Interactive niches of hematopoietic stem cells modulated by biofunctional polymer matrices, 7/2009 - 6/2017
Prof. Dr. Carsten Werner, Inst. of Biofunctional Polymer Materials

DFG Transregio 67

Glycosaminoglycan-poly(ethyleneglycol) hydrogels for improved dermal wound healing, 8/2012 - 6/2017
Prof. Dr. Carsten Werner, Inst. of Biofunctional Polymer Materials
Dr. Uwe Freudenberg, Inst. of Biofunctional Polymer Materials

DFG Graduate College

Hydrogel-Based Microsystems, 10/2013 - 3/2018
Prof. Dr. Brigitte Voit, Dept. Bioactive und responsive Polymers

DFG Cluster of Excellence

Center for Advancing Electronics Dresden (cfaed), 11/2012 - 10/2017
Prof. Dr. Brigitte Voit, Dept. Polymer Structures
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

European Union

BioSmartTrainee - Training in Bio-Inspired Design of Smart Adhesive Materials, 10/2015 - 9/2019
Dr. Alla Synytska, Dept. Polymer Interfaces

LASER4FUN - European ESRs Network on short pulsed laser micro/nanostructuring of surfaces, 9/2015 - 8/2019
Prof. Dr. Carsten Werner, Inst. of Biofunctional Polymer Materials

NANOLEAP - Nanocomposite for building constructions and civil infrastructures: European network pilot production line to promote industrial application cases, 1/2015 - 6/2018
Prof. Dr. Gert Heinrich, Dept. Composite Materials

SNAL - Smart Nano-objects for Alteration of Lipid-bilayers, 4/2014 - 3/2018
Prof. Dr. Jens-Uwe Sommer, Inst. Theory of Polymers

HydroZONES - Bioactivated hierarchical hydrogels as zonal implants for articular cartilage regeneration, 1/2013 - 12/2017
Prof. Dr. Carsten Werner, Inst. of Biofunctional Polymer Materials

METAMECH - Template assisted assembly of metamaterials using mechanical instabilities, 9/2015 - 9/2017
Prof. Dr. Andreas Fery, Abt. Nanostrukturierte Materialien

NanoCF - Tuning the properties of NanoCarbon with Fluorination, 10/2013 - 9/2017
Dr. Ulrich Scheler, Dept. Polyelectrolytes and Dispersions

SOMATAI - Soft Matter at Aqueous Interfaces, 10/2012 - 9/2016
Prof. Dr. Jens-Uwe Sommer, Inst. Theory of Polymers

German Academic Exchange Service (DAAD)

Glass Fibres with Multi-functional Properties for Defect Monitoring in FRP Structures, 1/2015 - 12/2016
Prof. Dr. Edith Mäder, Dept. Composite Materials

Nanostructured graphene membranes for catalytic and environmental remediation, 9/2015 - 3/2016
Prof. Dr. Manfred Stamm, Dept. Nanostructured Materials

Other Organisations

Alexander v. Humboldt Stiftung

Dynamic Tunable Plasmonic Activity from Autonomic Reconfigurable 3D Micro-origami, 2/2016 - 1/2018
Dr. Chunghong Ye, Dept. Polymer Interfaces

Cross-linked capsules with independently tuned properties for multi-anticancer drugs delivery, 4/2015 - 3/2016
Xingjie Zan, Dept. Bioactive and responsive Polymers

Helmholtz-Zentrum Dresden-Rossendorf e. V. / Helmholtz Association

Helmholtz Research School on Nanoelectronic Networks (NANONET), 10/2012 - 9/2018
Prof. Dr. Brigitte Voit, Dept. Polymer Structures

Projects supported by the Leibniz Association - Leibniz Competition

DWI - Leibniz-Institute for Interactive Materials, Aachen
http://www.dwi.rwth-aachen.de
Ex-vivo cultivation of bipolar epithelial/endothelial cell layers as a first step towards an organ like alveolar barrier, 3/2015 – 2/2018
Prof. Dr. Carsten Werner, Inst. of Biofunctional Polymer Materials

IOW - Leibniz Institute für Baltic Sea Research Warnemünde
http://www.io-warnemuende.de/mikromik-home.html
MikrOMIK: Microplastic as vector for microbial populations in the ecosystem of the Baltic Sea, 4/2014 – 3/2017
Dr. Klaus-Jochen Eichhorn, Dept. Analytics