Menue

Projects

Running projects:

BiPoLiS - Development of lithium-sulphur bipolar batteries, TP: Material development and production of the conducting film, BMWK, Special Fund "Climate and Transformation Fund", joint project: LioVolt GmbH, Eisenhuth GmbH & Co. KG, Fraunhofer Institute for Material and Beam Technology IWS, IPF Dresden e.V., Duration: 1/2023 - 12/2025

INNOVATIVE POLYMER-BASED COMPOSITES SYSTEMS FOR HIGH-EFFICIENT ENERGY SCAVENGING AND STORAGE (InComEss), Grant agreement ID: 862597; 03/2020 - 02/2024

Recently finished projects:

DFG: Tough and flexible styrene-butadiene block copolymers with defined carbon-based nanofillers for electrical and sensing appplications, 5/2020 - 4/2022

AIF ZF4090603ZG8: Planar materials for battery components for automotive applications (PLANAR MABAT) TP: Material development for electrically conductive feedthrough foils for use in batteries, Cooperative project with company Eisenhuth GmbH & Co.KG, duration: 3/2019 - 6/2021

CNT membrane: Nanoporous membranes of high specific flux made of oriented CNTs for the energy-efficient treatment of waste and process waters in the petroleum and natural gas industries, BMBF, Fördermaßnahme MachWas "Materialien für eine nachhaltige Wasserwirtschaft - MachWas", duration: 3/2017 - 8/2020

BMBF-Projekt 03XP00068G „EMBATT2.0 - Material and process development for the efficient production of the large-format bipolar battery EMBATT", cooperation project: Glatt Ingenieurtechnik GmbH , IAV GmbH, Fraunhofer IKTS Dresden, IPF Dresden, Isocoll Chemie GmbH, KMS Technology Center GmbH , Litarion GmbH, thyssenkrupp System Engineering GmbH, ULT AG, duration: 7/2016 - 6/2019

DFG: Struktur-Eigenschafts-Beziehungen in nm-struktuierten Blockcopolymer/Kohlenstoffnanoröhren-Kompositen mit selektiver Anordnung der Nanofüllstoffe in der Phasenmorphologie, Laufzeit: 5/2015 - 3/2020

BMBF project (01LY1512C) "Development of electrically and thermally conductive plastic compounds with functionalities for use in heat exchangers and fuel cells. subproject: 2-component-injection moulding, development and characterisation of material", Cooperative project: Fa. Eisenhuth GmbH & Co.KG, Allod Werkstoff GmbH & Co.KG, Carloplast Wärmetechnik GmbH, PROTECH GmbH, Kessen Maschinenbau GmbH, IPF Dresden e.V. und RTWH Aachen, duration: 3/2016 - 8/2018

DFG: Entwicklung von matrixanbindungs- und dispersionsoptimierten leitfähigen Nanokompositen für die Zwei-Photonen-Polymerisation, Gemeinschaftsprojekt mit Ruhr-Universität Bochum, 7/2015 - 1/2016

BMBF 01LY1307C "Development of conductive plastic composites with improved processability and increased impact strength/bending strength (ImpactBlend)", cooperation project under the leadership of the company Eisenhuth GmbH & Co.KG, collaboration with Allod Werkstoff GmbH & Co.KG, Calorplast Wärmetechnik GmbH, PROTECH GmbH, Kessen Maschinenbau GmbH, IPF Dresden e.V. und RWTH Aachen, duration 08/2014 - 07/2016•

• BMBF 03IS2011P Verbundprojekt des Programms "Spitzenforschung und Innovation in den neuen Ländern - Kompetzenznetzwerk für Nanosystemintegration (nanett), Anwendung von Nanotechnologien für energieeffizente Sensorsysteme, Teilprojekt Materialintegrierte Sensorik basierend auf Nanoeffekten (MintSensNano - Entwicklung leitfähige Polymermatrix, Gemeinschaftsprojekt unter Leitung von TU Chemnitz, Mitarbeit von ENAS, IAP, IPF 11/2012 - 10/2014

IGF 17546 'BG/2 "Processing and properties of graphene-filled thermoplastics", as part of the IGF Industrieller Gemeinschaftsforschung (BMWi/AiF), cooperation project of IPF and FhG-LBF Darmstadt, duration: 11/2012 - 12/2014

DAAD 380066 "Sensoren auf Basis von Blockcopolymeren/CNT-Nanokompositen", PPP mit Slowakei, 01/2013 - 12/2014

• BMBF SUA 10/009 "Elektrisch und thermisch leitfähige Polymernanocomposite: Verbesserung er Dispergierung von expandierten Graphit durch chemische Modifizierung", Kooperationsprojekt WTZ mit Südafrika, 05/2011 - 04/2014

• BMBF 03X0206F "Leitfähig laseraktivierbare Polymerverbunde mit Kohlenstoffnanoröhren für dreidimensionale gehäuseintegrierte Anwendungen" (CarboAktiv), Gemeinschaftsprojekt innerhalb der Inno.CNT Allianz "Kohlenstoffnanomaterialien erobern Märkte" unter Leitung von Fachhochschule Jena, Mitarbeit 3D Schilling Prototypen GmbH, CP-Laser-Cut-Processing GmbH, 3D GmbH, Lübeck Elektronik GmbH & Co., Rothfischer KG, IPF Dresden, pp mid GmbH, 04/2011 - 03/2014

• In situ Preparation of Block Copolymer - Carbon Nanotube (BCP-CNT) and Block Copolymer-Expandable Graphite (BCP-EG) Nanocomposites: A Comparative Study (DAAD, Sandwich Master-Programm mit IIT Kharagpur, Indien, Masterarbeit Poushali Bhawal) 10/2012 - 03/2013

• BMBF 03IS2011E Cooperative project within the call "Spitzenforschung und Innovation in den Neuen Ländern: Kompetenznetzwerk für nanosystemintegration (nanett)", Anwendung von Nanotechnologien für energieeffiziente Sensorsysteme, project part C: Materialintegrierte Sensorik - Entwicklung multifunktionaler Polymernanokompositstrukturen, Gemeinschaftsprojekt unter Leitung von TU Chemnitz, Mitarbeit von ENAS, IAP, IFW,IPF, duration 11/09 - 12/12

• IGF 336 ZBG "Neue leitfähige Hybridmaterialien mit kohlenstoffbasierten Füllstoffen: Materialentwicklung und optimierter Spitzguss", within the frame of IGF (Industrielle Gemeinschaftsforschung) und ZUTECH (Initativprogramm Zukunftstechnologien), (BMWi/AiF), cooperation project between IPF and DKI, duration 12/09 - 05/12

• DFG, "Electrically conductive composites based on expanded graphite (EG) and thermoplastic polyurethane (TPU)" , duration 06/09 - 05/12

• BMBF 03X0042M "Dispersion and conformation (CarbonDis): Develop tailor-made dispersion technologies for thermosetting, thermoplastic and elastomeric systems", Innovation Alliance Carbon Nanotubes: Innovation for industry and society (Inno.CNT), Cooperative project: leader Evonic, contributed by BASF, BMS, BYK Chemie, Exakt, Future Carbon, Rhein Chemie, Siemens, ZBT Duisburg, FhG-ICT, IPF Dresden, Uni Erlangen, Uni Kaiserslautern, TU Hamburg-Harburg, duration 04/08 - 03/12

• BMWi-ZIM KF2022808OH0 Antistatic adhesion polymers through integration of carbon nanotubes (CNTs); selection of adhesion systems, adhered parts and CNTs. Functionalisation and dispersion of CNTs. Characterization of functionalised CNTs and polymer composites, duration 07/10 - 02/12

• BMBF 03X0054B "Volume markets for polmyer composites (CarboTube): Develop injection moding and extrusion applications such as antistatic finishes, electrically conductive pipes, lightweight building panels, film and machine components for polymer composites (CarboTube); Innovation Alliance Carbon Nanotubes: Innovation for industry and society (Inno.CNT), Cooperative project: leader Putsch GmbH, contributed by PAZ, BASF, Kunststofftechnik Scherer & Trier, IPF Dresden, Gerodur MPM Kunststoffverarbeitung, qtec, Kunststofftechnik, Nexans, Weidmüller Interfaces, duration 02/09 - 01/12

• Influence on the chain conformation of aromatic polymindines and polyureas by the formation of supramolecular associates, duration 10/09 - 09/11

• EU Integrated Project „Inteltex : Intelligent multi-reactive textiles integrating nano-filler based CPC-fibres”, cooperative project with 23 partners from 11 countries, duration 9/06 –8/10

• BMBF 02PU2392 "Verbundprojekt: Entwicklung polymerer Nanokomposite mit gleichzeitig verbesserten mechanischen und elektrischen Eigenschaften (COMPOMEL); Teilprojekt; Stofflich-verfahrenstechnische Zusammenhänge beim Schmelzemischen", BMBF call "Nano geht in die Produktion", cooperative project headed by Motorola, coworkers BMS, Degussa, DKI, MLU, IPF, duration 05/07 - 07/10

• PPP Slovakei (DAAD), "Electrically and thermally conductive nanocomposites based on the nanostructured graphite", duration 01/08 - 12/09

• EU Network of Exvcellence NANOFUN-POLY "Nanostructured and functional polymer-based materials and composites", duration 06/04 - 05/08
participation on WP 5 and 9 (Processing and Chemistry) and within the frame of the international project "Nanostructuration: CNT and other nano-objects", subproject 1 "New nanostrutured conductive polymers with PANI or PANI blends and CNT or CNF"

• BMBF 03X3006E „Leichtbau mit thermoplastischen Nanocomposites“, BMBF-call „NanoMobil“, cooperative project headed by DC, coworkers GE Plastics, Südchemie, IPF, IFW, duration 08/09 - 07/12

• PPP Slovakei (DAAD) "Functionalized carbon nanotubes - an innovativer filler for processing of advanced electroconductive polymeric nanocomposites", duration 01/06 - 12/07

• SFB 287 (DFG) "Reaktive Polymere in nichthomogenen Sytemen, in Schmelzen und Grenzflächen", TP A11 "Modifizierung von Grenzschichten in heterogenen Blends", duration 01/96 - 12/07

• AiF-122 ZGB "Verbunde von Kunststoffen mit Kohlenstoff-Nanoröhren (Carbon Nanotubes): Optimierung von Verarbeitungsbedingungen und Eigenschaften" (together with DKI), duration 11/04 - 03/06