Departments > Processing > Publications

Publications

  1. Golriz, M.; Khonakdar, H. A.; Morshedian, J.
    Rheological assessment of variable molecular chains structures of linear low-density polyethylene under reactive modification more
    Journal of Applied Polymer Science 131 (2014) 39617 (1 of 13)


  2. Krause, B.; Pötschke, P.; Gohs, U.
    Effects of high energy electrons on the properties of polyethylene / multiwalled carbon nanotubes composites: Comparison of as-grown and oxygen-functionalised MWCNT more
    AIP Conference Proceedings 1593 (2014) 290-293


  3. Lehmann, D.; Bräuer, M.; Gedan-Smolka, M.; Kühnert, I.; Schneider, K.
    Grenzflächenreaktives Spritzgießen more
    Konstruktion (2014) IW5 - IW6


  4. Kutlu, B.; Schröttner, P.; Leuteritz, A.; Boldt, R.; Jacobs, E.; Heinrich, G.
    Preparation of melt-spun antimicrobially modified LDH/polyolefin nanocomposite fibers more
    Materials Science and Engineering / C 41 (2014) 8-16


  5. Khalili, R.; Jafari, S.H.; Saeb, M. R.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    Toward in situ compatibilization of polyolefin ternary blends through morphological manipulations more
    Macromolecular Materials and Engineering (2014) Early view


  6. Heinrich, G.; Wagenknecht, U.
    Eurofillers 2011 : Special Issue more
    in: Macromolecular Symposia, Heinrich, G.; Wagenknecht, U., ed. (Wiley-VCH 2014) 338, Pages 1 - 107


  7. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Wood-like material from thermoplastic polymer and landfill bio-materials: water absorption, thermal and morphological studies more
    Polymers from Renewable Resources 5 (2014) 1-18


  8. Rastin, H.; Jafari, S.H.; Saeb, M. R.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    On the reliability of existing theoretical models in anticipating type of morphology and domain size in HDPE/PA-6/EVOH ternary blends more
    European Polymer Journal 53 (2014) 1-12


  9. Mikesova, J.; Slouf, M.; Gohs, U.; Popelková, D.; Vacková, T.; Vu, N. H.; Kratochvil, .J.; Zhigunov, A.
    Nanocomposites of polypropylene/titanate nanotubes: morphology, nucleation effects of nanoparticles and properties more
    Polymer Bulletin 71 (2014) 795-818


  10. Gohs, U.; Mondal, M.; Thakur, V.; Naskar, K.; Wagenknecht, U.; Heinrich, G.
    Ethylene propylene diene rubber and natural rubber based TPVs by electron induced reactive processing more
    Thermoplastic elastomers : TPE magazine international (2014) 37-30


  11. Kutlu, B.; Leuteritz, A.; Häußler, L.; Oertel, U.; Heinrich, G.
    Stabilization of polypropylene using dye modified layered double hydroxides more
    Polymer Degradation and Stability 102 (2014) 9-14


  12. Baghaei, B.; Jafari, S.H.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    Novel thermo-sensitive hydrogel composites based on PLGA nanoparticles embedded in PNIPAAm with sustained drug release behavior more
    Journal of Applied Polymer Science (2014) Early view


  13. Burkert, S.; Simon, F.; Pleul, D.; Gohs, U.; Stamm, M.; Uhlmann, P.
    Surface characterization of electron-beam irradiated polymer brushes more
    Zeitschrift für Physikalische Chemie 228 (2014) 281-300


  14. Rastin, H.; Jafari, S.H.; Saeb, M. R.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    Mechanical, rheological, and thermal behavior assessments in HDPE/PA-6/EVOH ternary blends with variable morphology more
    Journal of Polymer Research 21 (2014) Art. 352


  15. Basu, D.; Das, A.; Stöckelhuber, K.W.; Wagenknecht, U.; Heinrich, G.
    Advances in layered double hydroxide (LDH)-based elastomer composites more
    Progress in Polymer Science 39 (2014) 594-626


  16. Shabanian, M.; Basaki, N.; Khonakdar, H. A.; Jafari, S.H.; Hedayati, K.; Wagenknecht, U.
    Novel nanocomposites consisting of a semi-crystalline polyamide and Mg-Al LDH: Morphology, thermal properties and flame retardancy more
    Applied Clay Science 90 (2014) 101-108


  17. Saeb, M. R.; Khonakdar, H. A.; Jafari, S.H.; Jalalifar, N.; Razban, M.; Wagenknecht, U.
    Interface evaluation in the ternary blends of HDP/PA-6/EVOH more
    Polymer Engineering and Science 71 (2014) 613-624


  18. Shabanian, M.; Basaki, N.; Khonakdar, H. A.; Kianipour, S.; Wagenknecht, U.
    Synthesis and properties of new polyamide/multiwalled carbon nanotube nanocomposites containing a pyridine group more
    Polymer International 63 (2014) Early view


  19. Kutlu, B.; Leuteritz, A.; Boldt, R.; Jehnichen, D.; Heinrich, G.
    Effects of LDH synthesis and modification on the exfoliation and introduction of a robust anion-exchange procedure more
    Chemical Engineering Journal 243 (2014) 394-404


  20. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Thermal properties of Carboxylated nitrile rubber/nylon-12 composites-filled lignocellulose materials more
    Journal of Thermoplastic Composite Materials 27 (2014) 167-179


  21. Golriz, M.; Khonakdar, H. A.; Morshedian, J.; Abedini, H.; Jafari, S.H.; Lederer, A.; Wagenknecht, U.
    Correlation between reactive modification conditions and degree of long-chain branching in chemically modified linear low density polyethylene using response surface experimental design more
    Macromolecular Materials and Engineering 299 (2014) 154-164


  22. Hinüber, C.; Chwalek, K.; Pan-Montojo, F.-J.; Nitschke, M.; Vogel, R.; Brünig, H.; Heinrich, G.; Werner, C.
    Hierarchically structured nerve guidance channels based on poly-3-hydroxybutyrate enhance oriented axonal outgrowth more
    Acta Biomaterialia 10 (2014) 2065-2095


  23. Tran, N. H. A.; Brünig, H.; Hinüber, C.; Heinrich, G.
    Melt spinning of biodegradable nanofibrillary structures from poly(lactic acid) and poly(vinyl alcohol) blends more
    Macromolecular Materials and Engineering 299 (2014) Early view


  24. Eshwaran, S. B.; Basu, D.; Kutlu, B.; Leuteritz, A.; Wagenknecht, U.; Stöckelhuber, K.W.; Naskar, K.; Das, A.; Heinrich, G.
    Stearate Modified Zinc-Aluminum Layered Double Hydroxides and Acrylonitrile Butadiene Rubber Nano-Composites more
    Polymer-Plastics Technology and Engineering 53 (2014) 65-73


  25. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Additive free thermoplastic vulcanizates based on natural rubber more
    Materials Chemistry and Physics 143 (2013) 360-366


  26. Hintze, C.; Heinrich, G.; Wießner, S.; Wagenknecht, U.
    Effect of processing parameters on morphology and performance characteristics of aramid fibre-reinforced elastomer composites more
    International Polymer Science And Technology 40 (2013) T/1-T/7


  27. Dordinejad, A. K.; Jafari, S.H.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    Thermorheological behavior analysis of mLLDPE and mVLDPE: Correlation with branching structure more
    Journal of Applied Polymer Science 129 (2013) 458-463


  28. Asadinezhad, A.; Khonakdar, H. A.; Scheffler, C.; Wagenknecht, U.; Heinrich, G.
    Poly(ethylene succinate)/single-walled carbon nanotube composites: a study on crystallization more
    Polymer Bulletin 70 (2013) 3463-3474


  29. Khonakdar, H. A.; Jafari, S.H.; Asadinezhad, A.; Zolali, A.; Wagenknecht, U.; Heinrich, G.
    On the interrelationship of transreaction with viscoelastic properties of poly(ethylene terephthalate)/poly(ethylene naphthalate) blends in the presence of nanoclay more
    Polymer Engineering and Science 53 (2013) 2556-2567


  30. Mahjub, A.; Jafari, S.H.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    Monte-Carlo simulation of ester exchange reactions in PET/PEN blends more
    Macromolecular Theory and Simulations 22 (2013) 207-216


  31. Entezam, M.; Khonakdar, H. A.; Yousefi, A. A.; Jafari, S.H.; Wagenknecht, U.; Heinrich, G.
    Dynamic and transient shear start-up flow experiments for analyzing nanoclay localization in PP/PET blends: Correlation with microstructure more
    Macromolecular Materials and Engineering 298 (2013) 113-126


  32. Khonakdar, H. A.; Saen, P.; Nodehi, A.; Jafari, S.H.; Asadinezhad, A.; Wagenknecht, U.; Heinrich, G.
    On rheology-morphology correlation of polypropylene/poly(trimethylene terephthalate) blend nanocomposites more
    Journal of Applied Polymer Science 127 (2013) 1054-1060


  33. Heidary, M.; Jafari, S.H.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.; Boldt, R.
    Effect of end-capped nanosilica on mechanical properties and microstructure of LLLDPE/EVA blends more
    Journal of Applied Polymer Science 127 (2013) 1172-1179


  34. Ashabi, L.; Jafari, S.H.; Khonakdar, H. A.; Kretzschmar, B.; Wagenknecht, U.; Heinrich, G.
    Effect of clay type and polymer matrix on microstructure and tensile properties of PLA/LLDPE/clay nanocomposites more
    Journal of Applied Polymer Science 130 (2013) 749-758


  35. Kutlu, B.; Meinl, J.; Leuteritz, A.; Brünig, H.; Heinrich, G.
    Melt-spinning of LDH/HDPE nanocomposites more
    Polymer 54 (2013) 5712-5718


  36. Mihai, M.; Mountrichas, G.; Pispas, S.; Stoica, I.; Aflori, M.; Auf der Landwehr, M.; Neda, I.; Schwarz, S.
    Calcium carbonate microparticle templates using a PHOS-b-PMAA double hydrophilic copolymer more
    Journal of Applied Crystallography 46 (2013) 1455-1466


  37. Golriz, M.; Khonakdar, H. A.; Morshedian, J.; Jafari, S.H.; Mohammadi, Y.; Wagenknecht, U.
    Microstructural evolution in linear low density polyethylene during peroxide modification: A Monte Carlo simulation study more
    Macromolecular Theory and Simulations 22 (2013) 426-438


  38. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Natural rubber based TPEs using accelerated electrons more
    Thermoplastic elastomers : TPE magazine international 5 (2013) 164-165


  39. Kang, N.-J.; Wang, De-Yi; Kutlu, B.; Zhao, P.-C.; Leuteritz, A.; Wagenknecht, U.; Heinrich, G.
    A new approach to reducing flammability of layered double hydroxide (LDH)-based polymer nanocomposites: preparation and characterization of dye-structure intercalated LDH and its effect on the flammability of PP-g-MA/LDH nanocomposites more
    ACS Applied Materials & Interfaces 5 (2013) 8991-8997


  40. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    The application of solid olive waste as reinforcement in carboxylated nitrile butadiene rubber/organo nano layered silicates composites more
    Journal of Solid Waste Technology and Management 39 (2013) 197-203


  41. Bräuer, M.; Edelmann, M.; Kühnert, I.; Lappan, U.; Lehmann, D.; Schneider, K.; Tuschla, M.
    Spritzgießen von Mehrkomponentenverbunden : Neue Verbunde mit dem Hochleistungskunststoff PPS more
    Kautschuk Gummi Kunststoffe (2013)


  42. Shabanian, M.; Kang, N.-J.; Wang, De-Yi; Wagenknecht, U.; Heinrich, G.
    Synthesis, characterization and properties of novel aliphatic-aromatic polyamide/functional carbon nanotube nanocomposites via in situ polymerization more
    RSC Advances 3 (2013) 20738-20745


  43. Saeb, M. R.; Moghri, M.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    Fusion level optimization of rigid PVC nanocompounds by using response surface methodology more
    Journal of Vinyl and Additive Technology 19 (2013) 168-176


  44. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Efficiency of high energy electrons to produce polypropylene/natural rubber-based thermoplastic elastomer more
    Polymer Engineering and Science 53 (2013) 1696-1705


  45. Vogel, R.; Boldt, R.; Vucak, M.; Nover, C.; Häußler, L.; Brünig, H.
    Acicular precipitated calcium carbonate as inorganic whisker for reinforcing of polypropylene fibers more
    e-Polymers 28 (2013) 1-10


  46. Shabanian, M.; Kang, N.-J.; Wang, De-Yi; Wagenknecht, U.; Heinrich, G.
    Synthesis of aromatic - aliphatic polyamide acting as adjuvant in polylactic acid (PLA)/ammonium polyphosphate (APP) system more
    Polymer Degradation and Stability 98 (2013) 1036-1042


  47. Ashabi, L.; Jafari, S.H.; Khonakdar, H. A.; Häußler, L.; Wagenknecht, U.; Heinrich, G.
    Non-isothermal crystallization behavior of PLA/LLDPE/nanoclay hybrid: Synergestic role of LLDPE and clay more
    Thermochimica Acta 565 (2013) 102-113


  48. Al-Farsi, M.; Abuagla, A.; Mohamed, E.; Gohs, U.
    The effect of electron beam on dates infestation more
    Food Control 33 (2013) 157-161


  49. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of `dry liquids` for post-processing crosslinking reactions more
    RFP Rubber Fibres Plastics for China (2013) 18-21


  50. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Preparation of natural rubber based thermoplastic vulcanizates by electron induced reactive processing more
    Kautschuk Gummi Kunststoffe 66 (2013) 47-50


  51. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Polypropylene/natural rubber thermoplastic vulcanizates by eco-friendly and sustainable electron induced reactive proecessing more
    Radiation Physics and Chemistry 88 (2013) 74-81


  52. Monami, A.; Reincke, K.; Grellmann, W.; Kretzschmar, B.
    Temperature dependence of fracture behaviour of PA6/OMMT nanocomposites more
    Journal of Applied Polymer Science 128 (2013) 1885-1894


  53. Asadinezhad, A.; Khonakdar, H. A.; Jafari, S.H.; Simon, F.; Wagenknecht, U.
    A surface analysis of polypropylene/clay nanocomposites exposed to electron irradiation more
    Journal of Applied Polymer Science 128 (2013) 1569-1574


  54. Frick, A.; Sich, D.; Heinrich, G.; Lehmann, D.; Gohs, U.; Stern, C.
    Properties of melt processable PTFE/PEEK blends: the effect of reactive compatibilization using electron beam irradiated melt processable PTFE more
    Journal of Applied Polymer Science 128 (2013) 1815-1827


  55. Kutlu, B.; Leuteritz, A.; Boldt, R.; Jehnichen, D.; Wagenknecht, U.; Heinrich, G.
    PANI-LDH prepared by polymerization-adsorption method and processing to conductive compounds more
    Applied Clay Science 72 (2013) 91-95


  56. Khonakdar, H. A.; Ehsani, M.; Asadinezhad, A.; Jafari, S.H.; Wagenknecht, U.
    Nanofilled polypropylene/poly(trimethylene terephthalate) blends: A morphological and mechanical properties study more
    Journal of Macromolecular Science Part B - Physics 52 (2013) 897-909


  57. Mostafaiyan, M.; Saeb, M. R.; Ahmadi, Z.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    A numerical study on deformation of Newtonian droplets throug converging cylindrical dies more
    e-Polymers (2013) 1-18


  58. Saeb, M. R.; Ramezani-Dakhel, H.; Khonakdar, H. A.; Heinrich, G.; Wagenknecht, U.
    A comparative study on curing characteristics and thermomechanical properties of elastomeric nanocomposites: the effects of eggshell and calcium carbonate nanofillers more
    Journal of Applied Polymer Science 127 (2013) 4241-4250


  59. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of "dry liquids" for post-processing crosslinking reactions more
    Rubber Fibres Plastics International : RFP 8 (2013) 36-39


  60. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    High performance, natural rubber thermoplastic elastomers using accelerated electrons more
    SPE Plastics Research Online (2013) Article online


  61. Lonkar, S. P.; Leuteritz, A.; Heinrich, G.
    Antioxidant intercalated layered double hydroxides: a new multifunctional nanofiller for polymers more
    RSC Advances 3 (2013) 1495-1501


  62. Lonkar, S. P.; Kutlu, B.; Leuteritz, A.; Heinrich, G.
    Nanohybrids of phenolic antioxidant intercalated into MgAl-layered double hydroxide clay more
    Applied Clay Science 71 (2013) 8-14


  63. Kundu, M. K.; Das, C. K.; Nigam, V.; Saxena, A. K.; Gohs, U.
    Effect of Nano Fillers on Polyphosphazene Elastomer under the influence of Temperature and Radiation: A Comparative Study more
    International Journal of Scientific Engineering and Technology 1 (2013) 169-176


  64. Ashabi, L.; Jafari, S.H.; Khonakdar, H. A.; Boldt, R.; Wagenknecht, U.; Heinrich, G.
    Tuning the processability, morphology and biodegradability of clay incorporated PLA/LLDPE blends via selective localization of nanoclay induced by melt mixing sequence more
    eXPRESS Polymer Letters 7 (2013) 21-39


  65. Radusch, H. J.; Kolesov, I.; Gohs, U.; Heinrich, G.
    Multiple shape-memory behavior of polyethylene/polycyclooctene blends cross-linked by electron irradiation more
    Advances in Science and Technology 77 (2013) 307-312


  66. Entezaam, M.; Khonakdar, H. A.; Yousefi, A. A.; Jafari, S.H.; Wagenknecht, U.; Heinrich, G.
    On nanoclay localization in polypropylene/poly(ethylene terephthalate) blends: Correlation with thermal and mechanical properties more
    Materials and Design 45 (2012) 110-117


  67. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Gefälltes Calciumcarbonat als Trägerpartikel von Reagenzien für Vernetzungsreaktionen more
    GAK : Gummi Fasern Kunststoffe 65 (2012) 754-757


  68. Radusch, H. J.; Kolesov, I.; Gohs, U.; Heinrich, G.
    Multiple shape-memory behavior of polyethylene/polycyclooctene blends cross-linked by electron irradiation more
    Macromolecular Materials and Engineering 297 (2012) 1225-1234


  69. Lonkar, S. P.; Kushwaha, O. S.; Leuteritz, A.; Heinrich, G.; Singh, R. P.
    Self photostabilizing UV-durable MWCNT/polymer nanocomposites more
    RSC Advances 2 (2012) 12255-12262


  70. Wang, De-Yi; Gohs, U.; Kang, N.-J.; Leuteritz, A.; Boldt, R.; Wagenknecht, U.; Heinrich, G.
    Method for simultaneously improving thermal stability and mechanical properties of poly(lactic acid): Effect of high-energy electrons on the morphological, mechanical, and thermal properties of PLA/MMT nanocomposite more
    Langmuir 28 (2012) 12601-12608


  71. Breier, A.; Hofmann, A.; Rentsch, C.; Rentsch, B.; Gliesche, K.; Scharnweber, D.; Heinrich, G.
    Integrating a drug release system into textile long bone implants by dip-coating from drug-suspension - influence of grain size and grain size distribution on the releasing profile more
    Drug Delivery Letters 2 (2012) 171-179


  72. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    The effect of silane treated hybrid filler on the mechanical and thermal performance of carboxylated nitrile butadiene rubber (XNBR) composites more
    International Polymer Processing 27 (2012) 328-333


  73. Hintze, C.; Wießner, S.; Wagenknecht, U.; Heinrich, G.
    Einfluss von Verarbeitungsparametern auf Morphologie und Anwendungseigenschaften von aramidkurzfaserverstärkten Elastomercomposites more
    GAK : Gummi Fasern Kunststoffe 65 (2012) 562-567


  74. Mousa, A.; Heinrich, G.; Simon, F.; Wagenknecht, U.; Stöckelhuber, K.W.; Dweiri, R.
    Carboxylated nitrile butadiene rubber/hybrid filler composites more
    Materials Research 15 (2012) 671-678


  75. Thunga, M.; Xia, Y.; Gohs, U.; Heinrich, G.; Larock, R. C.; Kessler, M. R.
    Influence of electron beam irradiation on the mechanical properties of vegetable-oil-based biopolymers more
    Macromolecular Materials and Engineering 297 (2012) 799-806


  76. Saeb, M. R.; Khonakdar, H. A.; Razban, M.; Jafari, S.H.; Garmabi, H.; Wagenknecht, U.
    Morphology prediction in HDPE/PA-6/EVOH ternary blends: defining the role of elasticity ratio more
    Macromolecular Chemistry and Physics 213 (2012) 1791-1802


  77. Wawrzyn, E.; Schartel, B.; Ciesielski, M.; Kretzschmar, B.; Braun , U.; Döring, M.
    Are novel aryl phosphates competitors for bisphenol a bis(diphenyl phosphate) in halogen-free flame-retarded polycarbonate/acrylonitrile-butadiene-styrene blends? more
    European Polymer Journal 48 (2012) 1561-1574


  78. Li, X.; Kretzschmar, B.; Janke, A.; Häußler, L.; Schneider, K.; Stamm, M.
    Investigation of structure and mechanical behavior pf polyamide 6/ZnO and polyamide 6/Al2O3 nanocomposites more
    Advanced Materials Research 557-559 (2012) 272-276


  79. Grothe, J.; Kaskel, S.; Leuteritz, A.
    Nanocomposites and hybrid mateials more
    in: Polymer Science: A Comprehensive Reference, Moeller, M.; Matyjaszewski, K., ed. (Elsevier 2012) , 8.08, 177-209


  80. Bräuer, M.; Edelmann, M.; Häußler, L.; Kühnert, I.
    Metall-Kunststoff-Verbunde: Untersuchungen zur Wirkungsweise einer Adhäsionsschicht aus Uretdionpulverlacksystemen more
    Materialwissenschaft und Werkstofftechnik 43 (2012) 534-543


  81. Rajeshbabu, R.; Gohs, U.; Naskar, K.; Mondal, M.; Wagenknecht, U.; Heinrich, G.
    Electron-induced reactive processing of poly(propylene)/ethylene-octene copolymer blends: A novel route to prepare thermoplastic vulcanizates more
    Macromolecular Materials and Engineering 297 (2012) 659-669


  82. Le, H. H.; Hoang, X. T.; Das, A.; Gohs, U.; Stöckelhuber, K.W.; Boldt, R.; Heinrich, G.; Adhikari, R.; Radusch, H. J.
    Kinetics of filler wetting and dispersion in carbon nanotube/rubber composites more
    Carbon 50 (2012) 4543–4556


  83. Wießner, S.; Wagenknecht, U.; Heinrich, G.; Michael, H.; Mennig, G.
    Continuous reactive compounding of elastomeric alloys based on ground tyre rubber and polypropylene in a co-rotating twin screw extruder more
    Kautschuk Gummi Kunststoffe 65 (2012) 28-36


  84. Jafari, S.H.; Asadinezhad, A.; Kalati-vahid, A.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    Polypropylene/poly(trimethylene terephthalate) blend nanocomposite: a thermal properties study more
    Polymer-Plastics Technology and Engineering 51 (2012) 682-688


  85. Drummer, D.; Schmidt, A.; Seefried, A.; Ehrenstein, G.W.; Kühnert, I.
    Einfluss der Prozessführung auf die Bauteileigenschaften bei der Druckverfestigung amorpher Thermoplaste more
    Zeitschrift Kunststofftechnik / Journal of Plastics Technology 8 (2012) 139-178


  86. Jungmeier, A.; Wildner, W.; Drummer, D.; Kühnert, I.
    Compression induced solidification - a novel processing technique for precise thermoplastic optical components with negligible internal stresses more
    ISRN Optics (2012) Article online, 10p.


  87. Mousa, A.; Heinrich, G.; Wagenknecht, U.; Kretzschmar, B.; Auf der Landwehr, M.
    The Application of Di-isocyante modified agro-polymer as filler for XNBR/PA-12 thermoplastic elastomer composites more
    Journal of Macromolecular Science - A: Pure Applied Chemistry 49 (2012) 385-396


  88. Wang, De-Yi; Das, A.; Leuteritz, A.; Mahaling, R. N.; Jehnichen, D.; Wagenknecht, U.; Heinrich, G.
    Structural characteristics and flammability of fire retarding EPDM/layered double hydroxide (LDH) nanocomposites more
    RSC Advances 2 (2012) 3927-3933


  89. Mousa, A.; Heinrich, G.; Gohs, U.; Wagenknecht, U.
    Mechanical properties of electron beam treated carboxylated nitrile butadiene rubber (XNBR) composites reinforced by organic/inorganic hybrid filler more
    Journal of Composite Materials 46 (2012) 1151-1157


  90. Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    In-situ modification of unmodified montmorillonite in polypropylene by electron-induced reactive processing more
    Macromolecular Chemistry and Physics 213 (2012) 729-737


  91. Khonakdar, H. A.; Golriz, M.; Jafari, S.H.; Abedini, H.; Wagenknecht, U.; Heinrich, G.
    A study on transreactions of PET/PEN reactive blending in a twin-screw extruder using axial dispersion model more
    Macromolecular Theory and Simulations 21 (2012) 340-349


  92. Entezam, M.; Khonakdar, H. A.; Yousefi, A. A.; Jafari, S.H.; Wagenknecht, U.; Heinrich, G.; Kretzschmar, B.
    Influence of interfacial activity and micelle formation on rheological behavior and microstructure of reactively compatibilized PP/PET blends more
    Macromolecular Materials and Engineering 297 (2012) 312–328


  93. Manhique, A.; Focke, W. W.; Leuteritz, A.; Madivate, C.
    Layered double hydroxides as nano additives in poly(e-caprolactone) more
    Molecular Crystals and Liquid Crystals 556 (2012) 114-123


  94. Mahmood, N.; Khan, Asad Ullah; Ali, Z.; Khan, M. Sohail; Haq, A. U.; Stöckelhuber, K.W.; Gohs, U.; Heinrich, G.
    Preparation and characterization of thermoplastic polyurethane–urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites more
    Journal of Applied Polymer Science 123 (2012) 3635-3643


  95. Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Electron-induced reactive processing of thermoplastic vulcanizate based on polypropylene and ethylene propylene diene terpolymer rubber more
    Polymer Journal 44 (2012) 439-448


  96. Leuteritz, A.; Kutlu, B.; Meinl, J.; Wang, De-Yi; Das, A.; Wagenknecht, U.; Heinrich, G.
    Layered double hydroxides (LDH): a multifunctional versatile system for nanocomposites more
    Molecular Crystals and Liquid Crystals 556 (2012) 107-113


  97. Schmidt, T.; Hoburg, A. T.; Broziat, C.; Smith, M.; Gohs, U.; Pruss, A.; Scheffler, S.
    Sterilization with electron beam irradiation influences the biomechanical properties and the early remodelling of tendon allografts for reconstruction of the anterior cruciate ligament (ACL) more
    Cell and Tissue Banking 13 (2012) 387-400


  98. Schmidt, T.; Hoburg, A. T.; Gohs, U.; Schumann, W.; Sim-Brandenburg, J. W.; Nitsche, A.; Scheffler, S.; Pruss, A.
    The inactivation effect of standard and fractionated electron beam irradIation on enveloped and non-enveloped viruses in a tendon transplant model more
    Transfusion Medicine and Hemotherapy 39 (2012) 29-35


  99. Mousa, A.; Heinrich, G.; Kretzschmar, B.; Wagenknecht, U.; Das, A.
    Utilization of agrowaste polymers in PVC/NBR alloys: tensile, thermal, and morphological properties more
    International Journal of Chemical Engineering 2012 (2012) Article ID 121496, 5 pages


  100. Jafari, S.H.; Kalati-vahid, A.; Khonakdar, H. A.; Asadinezhad, A.; Wagenknecht, U.; Jehnichen, D.
    Crystallization and melting behavior of nanoclay-containing polypropylene/poly(trimethylene terephthalate) blends more
    eXPRESS Polymer Letters 6 (2012) 148-158


  101. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of 'dry liquids' for post-processing crosslinking reactions more
    e-Polymers no. 023 (2012) 9 Seiten, http://www.e-polymers.org


  102. Das, A.; George, J. J.; Kutlu, B.; Leuteritz, A.; Wang, De-Yi; Rooj, S.; Jurk, R.; Rajeshbabu, R.; Stöckelhuber, K.W.; Galiatsatos, V.; Heinrich, G.
    A novel thermotropic elastomer based on highly-filled LDH-SSB composites more
    Macromolecular Rapid Communications 33 (2012) 337-342


  103. Engelmann, G.; Gohs, U.; Ganster, J.
    Monomer cast polyamide 6 composites and their treatment with high-energy electrons more
    Journal of Applied Polymer Science 123 (2012) 1201-1211


  104. Rajeshbabu, R.; Naskar, K.; Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Preparation of polypropylene (PP) / ethylene octene copolymer (EOC) thermoplastic vulcanizates (TPVs) by electron induced reactive processing more
    Radiation Physics and Chemistry 80 (2011) 1398-1405


  105. Mohammadi, S. R.; Khonakdar, H. A.; Ehsani, M.; Jafari, S.H.; Wagenknecht, U.; Kretzschmar, B.
    Investigation of thermal behavior and decomposition kinetic of PET/PEN blends and their clay containing nanocomposites more
    Journal of Polymer Research 18 (2011) 1765-1775


  106. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Rubber-wood composites from chemically modified olive husk powder and carboxylated nitrile butadiene rubber: cure characteristics, tensile behavior, and morphological studies more
    Journal of Wood Chemistry and Technology 32 (2011) 82-92


  107. Le, H. H.; Schoß, M.; Ilisch, S.; Gohs, U.; Heinrich, G.; Pham, T.; Radusch, H. J.
    CB filled EOC/EPDM blends as a shape-memory material: Manufacturing, morphology, and electrical properties more
    Polymer 52 (2011) 5858-5866


  108. Menzer, K.; Krause, B.; Boldt, R.; Kretzschmar, B.; Weidisch, R.; Pötschke, P.
    Percolation behaviour of multiwalled carbon nanotubes of altered length and primary agglomerate morphology in melt mixed isotactic polypropylene-based composites more
    Composites Science and Technology 71 (2011) 1936-1943


  109. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Cure characteristics and mechanical properties of carboxylated nitrile butadiene rubber (XNBR) vulcanizate reinforced by organic filler more
    Polymer-Plastics Technology and Engineering 50 (2011) 1388-1392


  110. Müller, M.; Krause, B.; Kretzschmar, B.; Pötschke, P.
    Influence of feeding conditions in twin-screw extrusion of PP/MWCNT composites on electrical and mechanical properties more
    Composites Science and Technology 71 (2011) 1535-1542


  111. Hoburg, A. T.; Keshlaf, S.; Schmidt, T.; Smith, M.; Gohs, U.; Perka, C.; Pruss, A.; Scheffler, S.
    Fractionation of high-dose electron beam irradiation of BPTB grafts provides significantly improved viscoelastic and structural properties compared to standard gamma irradiation more
    Knee surgery, sports traumatology, arthroscopy 19 (2011) 1955-1961


  112. Gramm, S.; Teichmann, J.; Nitschke, M.; Gohs, U.; Eichhorn, K.-J.; Werner, C.
    Electron beam immobilization of functionalized poly(vinyl methyl ether) thin films on polymer surfaces - Towards stimuli responsive coatings for biomedical purposes more
    eXPRESS Polymer Letters 5 (2011) 970-976


  113. Fischer, D.; Müller, J.; Kummer, S.; Kretzschmar, B.
    Real time monitoring of morphologic and mechanical properties of polymer nanocomposites during extrusion by near infrared and ultrasonic spectroscopy more
    Macromolecular Symposia 305 (2011) 20-27


  114. Lappan, U.; Geißler, U.; Gohs, U.
    Radiation-induced graft copolymerization of styrene into tetrafluoroethylene-hexafluoropropylene-vinylidene fluoride (THV) terpolymer films more
    Macromolecular Materials and Engineering 296 (2011) 843-849


  115. Gohs, U.; Leuteritz, A.; Naskar, K.; Volke, S.; Wießner, S.; Heinrich, G.
    Reactive EB processing of polymer compounds more
    Macromolecular Symposia 296 (2011) 589-595


  116. Vyalikh, A.; Wang, De-Yi; Wagenknecht, U.; Heinrich, G.; Scheler, U.
    Molecular dynamics in aluminum layered double hydroxides as studied by 1H T1p NMR measurements more
    Chemical Physics Letters 509 (2011) 138-142


  117. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Heinrich, G.; Werner, C.
    Hollow fibers made from a poly(3-hydroxybutyrate)/poly-e-caprolactone blend more
    eXPRESS Polymer Letters 5 (2011) 643-652


  118. Das, A.; Wang, De-Yi; Leuteritz, A.; Subramaniam, K.; Greenwell, H. C.; Wagenknecht, U.; Heinrich, G.
    Preparation of zinc oxide free, transparent rubber nanocomposites using a layered double hydroxide filler more
    Journal of Materials Chemistry 21 (2011) 7194-7200


  119. Wagenknecht, U.; Gohs, U.; Leuteritz, A.; Volke, S.; Wießner, S.; Heinrich, G.
    Modification of particle filled polymers with high energy electrons under in-stationary conditions of melt mixing more
    Macromolecular Symposia 301 (2011) 146-150


  120. Costa, F. R.; Leuteritz, A.; Meinl, J.; Wagenknecht, U.; Heinrich, G.
    LDH as nanofiller: Organic modification and dispersion in polymers more
    Macromolecular Symposia 301 (2011) 46-54


  121. Gedan-Smolka, M.; Müller, A.; Gohs, U.; Calvimontes, A.
    Electron pretreatment of sheet molding compounds (SMC) more
    Progress in Organic Coatings (2011) 159-167


  122. Sablong, R.; Duchateau, R.; Koning, Cor E.; Pospiech, D.; Korwitz, A.; Komber, H.; Starke, S.; Häußler, L.; Jehnichen, D.; Auf der Landwehr, M.
    Incorporation of a flame retardancy enhancing phosphorus-containing diol into poly(butylene terephthalate) via solid state polycondensation: A comparative study more
    Polymer Degradation and Stability 96 (2011) 334-341


  123. Wang, De-Yi; Leuteritz, A.; Kutlu, B.; Auf der Landwehr, M.; Jehnichen, D.; Wagenknecht, U.; Heinrich, G.
    Preparation and investigation of the combustion behavior of polypropylene/organomodified MgAl-LDH micro-nanocomposite more
    Journal of Alloys and Compounds 509 (2011) 3497-3501


  124. Rooj, S.; Thakur, V.; Gohs, U.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    In situ reactive compatibilization of polypropylene/epoxidized natural rubber blends electron induced reactive processing: novel in-line mixing technology more
    Polymers for Advanced Technologies 22 (2011) 2257-2263


  125. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Thermoplastic composites based on renewable natural resources: Unplasticized PVC/Olive Husk more
    International Journal of Polymeric Materials 59 (2010) 843-853


  126. Rentsch, C.; Rentsch, B.; Breier, A.; Spekl, K.; Jung, R.; Manthey, S.; Scharnweber, D.; Zwipp, H.; Biewener, A.
    Long-bone critical-size defects treated with tissue-engineered polycaprolactone-co-lactide scaffolds: A pilot study on rats more
    Journal of Biomedical Materials Research Part A 95 (2010) 964-972


  127. Wang, De-Yi; Costa, F. R.; Leuteritz, A.; Schönhals, A.; Vyalikh, A.; Scheler, U.; Wagenknecht, U.; Kutlu, B.; Heinrich, G.
    Polyolefin nanocomposites with layered double hydroxides more
    in: Advances in polyolefin nanocomposites, Vikas Mittal, ed. (CRC Press 2010) , 225-245


  128. Sritragool, K.; Michael, H.; Gehde, M.; Gohs, U.; Heinrich, G.
    Polypropylene/rubber particle blends by electron induced reactive processing more
    Kautschuk Gummi Kunststoffe 63 (2010) 554-558


  129. Wang, De-Yi; Leuteritz, A.; Wang, Yu-Zhong; Wagenknecht, U.; Heinrich, G.
    Preparation and burning behaviors of flame retarding biodegradable poly (latic acid) nanocomposite based on zinc aluminum layered double hydroxide more
    Polymer Degradation and Stability 95 (2010) 2474-2480


  130. Thakur, V.; Leuteritz, A.; Gohs, U.; Kretzschmar, B.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    Montmorillonite nanocomposites with electron-beam modified atactic polypropylene more
    Applied Clay Science 49 (2010) 200-204


  131. Hoburg, A. T.; Keshlaf, S.; Schmidt, T.; Smith, M.; Gohs, U.; Perka, C.; Pruss, A.; Scheffler, S.
    Effect of electron beam irradiation on biomechanical properties of patellar tendon allografts in anterior cruciate ligament reconstruction more
    The American Journal of Sports Medicine 38 (2010) 1134-1140


  132. Handge, U.A.; Altstädt, V.; Hedicke-Höchstötter, K.; Pospiech, D.; Jehnichen, D.; Kretzschmar, B.
    Surface functionalization of halloysite nanotubes for polyamide 6 composites more
    Zeitschrift Kunststofftechnik = Journal of plastics technology : archivierte, rezensierte Internetzeitschrift des Wissenschaftlichen Arbeitskreises Kunstofftechnik (WAK) 6 (2010) 316-337


  133. Wang, De-Yi; Das, A.; Costa, F. R.; Leuteritz, A.; Wang, Yu-Zhong; Wagenknecht, U.; Heinrich, G.
    Synthesis of organo Co-Al layered double hydroxide via a novel single step self-assembling method and its use as flame retardant nanofiller in PP more
    Langmuir 26 (2010) 14162-14169


  134. Heinrich, G.; Gohs, U.; Stöckelhuber, K.W.
    Leibniz Applikationslabor Multifunktionelle Polymerwerkstoffe more
    Dresdner Transferbrief 3.10 (2010) 15


  135. Sritragool, K.; Michael, H.; Gehde, M.; Gohs, U.; Heinrich, G.
    PP/rubber particle blends by high energy electron treatment under stationary condition more
    Kautschuk Gummi Kunststoffe 63 (2010) 377-382


  136. Costa, F. R.; Pradhan, S.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    XNBR/LDH nanocomposites: Effect of vulcanization and organic modifier more
    Journal of Polymer Science: Part B: Polymer Physics 48 (2010) 2302-2311


  137. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Werner, C.
    Hollow poly(3-hydroxybutyrate) fibers produced by melt spinning more
    Macromolecular Materials and Engineering 295 (2010) 585-594


  138. Villmow, T.; Kretzschmar, B.; Pötschke, P.
    Influence of screw configuration, residence time, and specific mechanical energy in twin-screw extrusion of polycaprolactone/multi-walled carbon nanotube composites more
    Composites Science and Technology 70 (2010) 2045-2055


  139. Lappan, U.; Geißler, U.; Gohs, U.; Uhlmann, St.
    Grafting of styrene into pre-irradiated fluoropolymer films: Influence of base material and irradiation temperature more
    Radiation Physics and Chemistry 79 (2010) 1067-1072


  140. Schuricht, W.; Leuteritz, A.
    Entwicklungsanforderungen an die Rohrhersteller more
    EuroHeat & Power Deutschland 39 (2010) 38-41


  141. Wang, De-Yi; Leuteritz, A.; Boldt, R.; Häußler, L.; Wagenknecht, U.; Heinrich, G.
    Thermal degradation behaviors of nanocomposite based on Polypropylene and Co-Al layered double hydroxide more
    Polymer Degradation and Stability 95 (2010) 285-290


  142. Hoffmann, T.; Pospiech, D.; Häußler, L.; Sahre, K.; Komber, H.; Harnisch, C.; Auf der Landwehr, M.; Schäfer, A.; Döring, M.
    Phosphorus-containing polysulfones - a comparative study more
    High Performance Polymers 22 (2010) 715-741


  143. Wurm, A.; Ismail, M.; Kretzschmar, B.; Pospiech, D.; Schick, C.
    Retarded crystallization in polyamide/layered silicates nanocomposites caused by an immobilized interphase more
    Macromolecules 43 (2010) 1480-1487


  144. Wang, De-Yi; Costa, F. R.; Vyalikh, A.; Leuteritz, A.; Scheler, U.; Jehnichen, D.; Wagenknecht, U.; Häußler, L.; Heinrich, G.
    One-step synthesis of organic LDH and its comparison with regeneration and anion exchange method more
    Chemistry of Materials 21 (2010) 4490-4497


  145. Rentsch, C.; Rentsch, B.; Breier, A.; Hofmann, A.; Manthey, S.; Scharnweber, D.; Biewener, A.; Zwipp, H.
    Evaluation of the osteogenic potential and vascularization of 3D poly(3)hydroxybutyrate scaffolds subcutaneously implanted in nude rats more
    Journal of Biomedical Materials Research Part A 92A (2010) 185-195


  146. Pötschke, P.; Andres, T.; Villmow, T.; Pegel, S.; Brünig, H.; Kobashi, K.; Fischer, D.; Häußler, L.
    Liquid sensing properties of fibres prepared by melt spinning from poly(lactic acid) containing multi-walled carbon nanotubes more
    Composites Science and Technology 70 (2010) 343-349


  147. Vyalikh, A.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.; Massiot, D.; Scheler, U.
    From layered double hydroxides to layered double hydroxide-based nanocomposites - A solid-state NMR study more
    Journal of Physical Chemistry / C 113 (2009) 21308-21313


  148. Heinrich, G.; Breier, A.; Hinüber, C.
    Bioabbaubare Polymere in textiler Form für die regenerative Medizin more
    Dresdner Transferbrief 17 (2009) 12


  149. Larsen, C. Ting; Togeskov, P.; Leuteritz, A.
    Alterung von Kunststoffmantelrohren Diffusion der Zellgase durch polyethylen more
    EuroHeat & Power Deutschland 38 (2009) 36-41


  150. Wang, De-Yi; Leuteritz, A.; Wagenknecht, U.; Heinrich, G.
    Self-assembling organomodified Co/Al based layered double hydroxides (LDH) via one-step route more
    Transactions of Nonferrous Metals Society of China 19 (2009) 1479-1482


  151. Naskar, K.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    PP-EPDM thermoplastic vulcanisates (TPVs) by electron induced reactive processing more
    eXPRESS Polymer Letters 3 (2009) 677-683


  152. Rentsch, B.; Rentsch, C.; Breier, A.; Hofmann, A.; Scharnweber, D.
    Embroidered and surface modified polycaprolactone-co-lactide scaffolds as bone substitute - in vitro characterization more
    Annals of Biomedical Engineering 37 (2009) 2118-2128


  153. Larsen, C. Ting; Togeskov, P.; Leuteritz, A.
    Extending the service life of pre-insulated pipes: Analyses of diffusion rates through PE and impact on ageing more
    EuroHeat & Power International 6 (2009) 48-53


  154. Thakur, V.; Das, A.; Mahaling, R. N.; Rooj, S.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Influence of layered double hydroxides on the curing of carboxylated nitrile rubber with zinc oxide more
    Macromolecular Materials and Engineering 294 (2009) 561-569


  155. Mousa, A.; Heinrich, G.; Gohs, U.; Häßler, R.; Wagenknecht, U.
    Application of renewable agro-waste-based olive pomace on the mechanical and thermal performance of toughened PVC more
    Polymer-Plastics Technology and Engineering 48 (2009) 1030-1040


  156. Burkert, S.; Gohs, U.; Uhlmann, P.; Stamm, M.
    Tuning of biocompatible thermo-sensitive polymer brushes by e-beam irradiation more
    Polymeric Materials: Science and Engineering 101 (2009) 1162


  157. Lappan, U.; Geißler, U.; Gohs, U.; Uhlmann, St.
    Influence of irradiation temperature on grafting of styrene into poly(tetrafluoroethylene-co-hexafluoropropylene) films more
    Macromolecular Materials and Engineering 294 (2009) 510-515


  158. Focke, W. W.; Joseph, S.; Grimbeek, J.; Summers, G. J.; Kretzschmar, B.
    Mechanical properties of ternary blends of ABS + HIPS + PETG more
    Polymer-Plastics Technology and Engineering 48 (2009) 814-820


  159. Schönhals, A.; Goering, H.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Dielectric properties of nanocomposites based on polyethylene and layered double hydroxide more
    Macromolecules 42 (2009) 4165-4174


  160. Cherif, C.; Rödel, H.; Hoffmann, G.; Diestel, O.; Herzberg, C.; Paul, C.; Schulz, C.; Großmann, K.; Mühl, A.; Mäder, E.; Brünig, H.
    Textile Technologien für hybridgarnbasierte komplexe Preformstrukturen more
    Zeitschrift Kunststofftechnik : Journal of plastics technology / Wissenschaftlicher Arbeitskreis der Universitäts-Professoren der Kunststofftechnik 6 (2009) 103-129


  161. Costa, F. R.; Leuteritz, A.; Wagenknecht, U.; Auf der Landwehr, M.; Jehnichen, D.; Häußler, L.; Heinrich, G.
    Alkyl sulfonate modified LDH: effect of alkyl chain length on intercalation behavior, particle morphology and thermal stability more
    Applied Clay Science 44 (2009) 7-14


  162. Khonakdar, H. A.; Golriz, M.; Jafari, S.H.; Wagenknecht, U.
    Correlation of sequence block lengths and degree of randomness with melt rheological properties in PET/PEN blends more
    Macromolecular Materials and Engineering 294 (2009) 272-280


  163. Pötschke, P.; Villmow, T.; Andres, T.; Kobashi, K.; Rentenberger, R.; Brünig, H.; Fischer, D.; Häußler, L.
    Melt processed polymer - carbon nanotube composites as materials for liquid sensing applications more
    Polymer Preprints 50 (2009) 419-420


  164. Gehde, M.; Gohs, U.; Heinrich, G.; Michael, K.; Sritragool, K.; Wagenknecht, U.; Wießner, S.
    Modifizierung von Gummipartikel/Thermoplastmischungen mit energiereichen Elektronen more
    GAK : Gummi Fasern Kunststoffe 62 (2009) 88-93


  165. Kalaivani, S.; Vijayabaskar, V.; Thunga, M.; Stephan, M.; Dorschner, H.; Heinrich, G.; Bhowmick, A. K.; Wagenknecht, U.
    Effect of irradiation temperatures on nitrile rubber nanocomposites more
    Plastics, Rubber and Composites 38 (2009) 39-45


  166. Khan, M. Sohail; Lehmann, D.; Heinrich, G.; Gohs, U.; Franke, R.
    Structure-property effects on mechanical, friction and wear properties of electron modified PTFE filled EPDM composite more
    eXPRESS Polymer Letters 3 (2009) 39-48


  167. Khan, M. Sohail; Franke, R.; Gohs, U.; Lehmann, D.; Heinrich, G.
    Friction and wear behaviour of electron beam modified PTFE filled EPDM compounds more
    Wear 266 (2009) 175-183


  168. Hasan, M. M. B.; Dutschk, V.; Brünig, H.; Mäder, E.; Häußler, L.; Häßler, R.; Cherif, C.; Heinrich, G.
    Comparison of tensile, thermal, anf thermo-mechanical properties of polyester filaments having different cross-sectional shape more
    Journal of Applied Polymer Science 111 (2008) 805-812


  169. Das, A.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Nanocomposites based on chloroprene rubber: Effect of chemical nature and organic modification of nanoclay on the vulcanizate properties more
    European Polymer Journal 44 (2008) 3456-3465


  170. Pospiech, D.; Jehnichen, D.; Komber, H.; Korwitz, A.; Janke, A.; Hoffmann, T.; Kretzschmar, B.; Reuter, U.; Döring, M.; Seibold, S.; Perez Graterol, R.; Sandler, J.; Altstädt, V.; Bellucci, F.; Camino, G.
    New polymers for tailor-made nanocomposites more
    Journal of Nanostructured Polymers and Nanocomposites 4 (2008) 62-75


  171. Bräuer, M.; Tändler, B.; Komber, H.; Pompe, G.; Bellmann, C.; Brünig, H.; Hess, C.
    Beiträge zum Reaktionsmechanismus des Elastanfaserschmelzspinnens nach dem Vernetzerverfahren more
    Kautschuk Gummi Kunststoffe 61 (2008) 531-539


  172. Wagenknecht, U.; Kretzschmar, B.; Pötschke, P.; Costa, F. R.; Pegel, S.; Stöckelhuber, K.W.; Heinrich, G.
    Polymere Nanokomposite mit anorganischen Funktionsfüllstoffen more
    Chemie Ingenieur Technik 80 (2008) 1683-1699


  173. Pradhan, S.; Costa, F. R.; Jehnichen, D.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    Elastomer/LDH nanocomposites: Synthesis and studies on nanoparticle dispersion, interfacial properties and interfacial adhesion more
    European Polymer Journal 44 (2008) 3122-3132


  174. Reichelt, S.; Eichhorn, K.-J.; Gohs, U.; Simon, F.; Fleischmann, S.; Voit, B.
    Immobilization of a hyperbranched polyester via grafting-to and electron beam irradiation more
    Langmuir 24 (2008) 9392-9400


  175. Blechschmidt, D.; Lindner, R.; Erth, H.; Brünig, H.
    Spunbonded nonwovens made from polyactides for technical applications more
    Chemical Fibers International 58 (2008) 190-193


  176. Burns, M.; Wagenknecht, U.; Kretzschmar, B.; Focke, W. W.
    Effect of hydrated fillers and red phosphorus on the limiting oxygen index of poly(ethylene-co-vinyl actate)-poly(vinyl butyral) and low density polyethylene-poly(ethylene-co-vinyl alcohol) blends more
    Journal of Vinyl and Additive Technology 14 (2008) 113-119


  177. Schulze, U.; Sen Majumder, P.; Heinrich, G.; Stephan, M.; Gohs, U.
    Electron beam crosslinking of atactic polypropylene: Development of a potential novel elastomer more
    Macromolecular Materials and Engineering 293 (2008) 692-699


  178. Villmow, T.; Pötschke, P.; Pegel, S.; Häußler, L.; Kretzschmar, B.
    Influence of twin-screw extrusion conditions on the dispersion of multi-walled carbon nanotubes in a poly(lactic acid) matrix more
    Polymer 49 (2008) 3500-3509


  179. Wagenknecht, U.; Costa, F. R.; Heinrich, G.; Reinemann, S.
    Layered double hydroxides (LDH) - an environmentally friendly, nano scale flame retardant more
    Rubber, fibres, plastics international : RFP (2008) 206-209


  180. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    The potential of O-MMT as a reinforcing filler for uncured and dynamically cured PVC/XNBR composites more
    Journal of Macromolecular Science - A: Pure Applied Chemistry 45 (2008) 733-741


  181. Wagenknecht, U.; Costa, F. R.; Heinrich, G.; Reinemann, S.
    Layered double hydroxides (LDH) - ein umweltfreundlicher nanoskaliger Flammhemmer more
    GAK Gummi Fasern Kunststoffe 61 (2008) 369-372


  182. Grenzer, M.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Nonlinear behavior of polyethylene/layered double hydroxide nanocomposites under shear flow. - In kyrill. Schr. more
    Vysokomol. Soedinenija, Ser. A 50 (2008) 868-881


  183. Li, X.; Schneider, K.; Kretzschmar, B.; Stamm, M.
    Deformation behavior of PP and PP/ZnO Nanocomposites as studied by SAXS and WAXS more
    Macromolecules 41 (2008) 4371-4379


  184. Stephan, M.; Gohs, U.;Heinrich, G.; Volke, S.; Wagenknecht, U.
    Electron Treatment of Thermoplastics under Reactive Conditions more
    Proceedings of the Polymer Processing Society 24th Annual Meeting (2008) 3 Pages


  185. Gohs, U.; Heinrich, G.; Stephan, M.; Volke, S.; Wagenknecht, U.
    Electron Treatment of Polymer Melts under Static and Mixing Conditions more
    Proceedings of the Polymer Processing Society 24th Annual Meeting (2008) 3 Pages


  186. Bellucci, F.; Terenzi, A.; Pospiech, D.; Leuteritz, A.; Frache, A.; Traverso, G.; Camino, G.
    Intercalation degree in PP/organoclay nanocomposites: role of surfactant structure more
    Polymers for Advanced Technologies 19 (2008) 547-555


  187. Grenzer, M.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Nonlinear behavior of polyethylene/layered double hydroxide nanocomposites under shear flow more
    Polymer Science / Series A 50 (2008) 573-582


  188. Vogel, R.; Voigt, D.; Tändler, B.; Gohs, U.; Häußler, L.
    Melt spinning of poly(3-hydroxybutyrate) for tissue engineering using electron-beam irradiated poly(3-hydroxybutyrate) as nucleation agent more
    Macromolecular Bioscience 8 (2008) 426-431


  189. Albrecht, V.; Reinsch, E.; Gohs, U.; Schünemann, R.; Husemann, K.; Simon, F.
    Zur elektrostatischen Trennung von Polyolefingemischen more
    Aufbereitungstechnik 49 (2008) 26-34


  190. Slouf, M.; Synkova, H.; Baldrian, J.; Marek, A.; Kovarova, J.; Schmidt, P.; Stephan, M.; Dorschner, H.; Gohs, U.
    Structural changes of UHMWPE after e-beam irradiation and thermal treatment more
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 85 (2008) 240-251


  191. Villmow, T.; Pegel, S.; Pötschke, P.; Wagenknecht, U.
    Influence of injection molding parameters on the electrical resistivity of polycarbonate filled with multi-walled carbon nanotubes more
    Composites Science and Technology 68 (2008) 777-789


  192. Costa, F. R.; Leuteritz, A.; Wagenknecht, U.; Jehnichen, D.; Häußler, L.; Heinrich, G.
    Intercalation of Mg-Al based layered double hydroxide by anionic surfactants containing different functionalities using regeneration method more
    Applied Clay Science 38 (2008) 153-164


  193. Vijayabaskar, V.; Stephan, M.; Kalaivani, S.; Volke, S.; Heinrich, G.; Dorschner, H.; Bhowmick, A. K.; Wagenknecht, U.
    Influence of radiation temperature on the crosslinking of nitrile rubber by electron beam irradiation more
    Radiation Physics and Chemistry 77 (2008) 511-521


  194. Costa, F. R.; Grenzer, M.; Wagenknecht, U.; Heinrich, G.
    Layered double hydroxide based polymer nanocomposites more
    in: Wax Crystal Control - Nanocomposites Stimuli-Responsive Polymers, Series: Advances in Polymer Science, ed. (Springer 2008) 210, 101-168


  195. Khizhnyak, S.; Vorobjava, K. O.; Kudryashova, E. V.; Malanni, M. N.; Auf der Landwehr, M.; Eichhorn, K.-J.; Pakhomov, P.
    Study of polymer composites and blends by means of FTIR spectroscopy, New approach (In kyrill. Schrift) more
    Tver State University 13 (2007) 75-82


  196. Dutschk, V.; Myat, Su Su; Brünig, H.; Märtin, J.; Stolz, M.; Breitzke, B.; Cherif, C.; Heinrich, G.
    The influence of different ether carboxylic acids on polyester fibre friction more
    Tenside Surfactants Detergents 44 (2007) 270-273


  197. Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    LDPE/Mg-Al layered double hydroxide nanocomposite: Thermal and flammability properties more
    Polymer Degradation and Stability 92 (2007) 1813-1823


  198. Schwarz, S.; Jaeger, W.; Paulke, B.-R.; Bratskaya, S.; Smolka, N.; Bohrisch, J.
    Cationic Flocculants Carrying Hydrophobic Functionalities: Applications of solid/liquid separation more
    Journal of Physical Chemistry / B 111 (2007) 8649-8654


  199. Stephan, M.; Vijayabaskar, V.; Kalaivani, S.; Volke, S.; Heinrich, G.; Dorschner, H.; Wagenknecht, U.; Bhowmick, A. K.
    Crosslinking of nitrile rubber by electron beam irradiation at elevated temperatures more
    Kautschuk Gummi Kunststoffe 60 (2007) 542-547


  200. Pospiech, D.; Korwitz, A.; Komber, H.; Voigt, D.; Jehnichen, D.; Müller, J.; Janke, A.; Hoffmann, T.; Kretzschmar, B.
    In situ synthesis of poly(ethylene terephthalate)/layered silicate nanocomposites by polycondensation more
    High Performance Polymers 19 (2007) 565-580


  201. Burkert, S.; Schmidt, T.; Gohs, U.; Dorschner, H.; Arndt, K.-F.
    Cross-linking of poly(N-vinyl pyrrolidone) films by electron beam irradiation more
    Radiation Physics and Chemistry 76 (2007) 1324-1328


  202. Gottlieb, R.; Kaiser, C.; Gohs, U.; Arndt, K.-F.
    Temperature sensitive hydrogels based on hydroxypropylcellulose by high energy irraduation more
    Macromolecular Symposia 254 (2007) 361-369


  203. Pospiech, D.; Kretzschmar, B.; Willeke, M.; Leuteritz, A.; Jehnichen, D.; Janke, A.; Omastová, M.
    Exfoliation behavior of Montmorillonite modified by poly(oxyalkylene)s on polypropylene and the properties of the resulting nanocomposites more
    Polymer Engineering and Science 47 (2007) 1262-1271


  204. Burkert, S.; Schmidt, T.; Gohs, U.; Mönch, I.; Arndt, K.-F.
    Patterning of thin poly(N-vinyl pyrrolidone) films on silicon substrates by electron beam lithography more
    Journal of Applied Polymer Science 106 (2007) 534-539


  205. Vogel, R.; Tändler, B.; Voigt, D.; Jehnichen, D.; Häußler, L.; Peitzsch, L.; Brünig, H.
    Melt spinning of bacterial aliphatic polyester using reactive extrusion for improvement of crystallization more
    Macromolecular Bioscience 7 (2007) 820-828


  206. Golzar, M.; Brünig, H.; Mäder, E.
    Commingled hybrid yarn diameter ratio in continuous fiber-reinforced thermoplastic composites more
    Journal of Thermoplastic Composite Materials 20 (2007) 17-26


  207. Leuteritz, A.; Kretzschmar, B.; Pospiech, D.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Industry-relevant preparation, characterization, and applications of polymer nanocomposites more
    in: Polymeric nanostructures and their applications : Vol. 2: Applications, Hari Singh Nalwa, ed. (American Scienctific Publishers 2007) 2, 99-151


  208. Pötschke, P.; Kretzschmar, B.; Janke, A.
    Use of carbon nanotube filled polycarbonate in blends with montmorillonite filled polypropylene more
    Composite Science and Technology 67 (2007) 855-860


  209. Khonakdar, H. A.; Jafari, S.H.; Haghighi Als, A.; Wagenknecht, U.; Häußler, L.; Reuter, U.
    Thermal and mechanical properties of uncrosslinked and chemically crosslinked polyethylene/ethylene vinyl acetate copolymer blends more
    Journal of Applied Polymer Science 103 (2007) 3261-3270


  210. Hoffmann, T.; Pospiech, D.; Kretzschmar, B.; Reuter, U.; Häußler, L.; Eckert, F.; Perez Graterol, R.; Sandler, J.; Altstädt, V.
    Modification of polysulfones by carboxylic acids more
    High Performance Polymers 19 (2007) 48-61


  211. Mäder, E.; Rothe, C.; Brünig, H.; Leopold, T.
    Online spinning of commingled yarns - equipment and yarn modification by tailored fibre surfaces more
    Key Engineering Materials 334-335 (2007) 229-232


  212. Mrozik, B.; Hoffmann, G.; Cherif, C.; Walter, A.; Gelinsky, M.; Pompe, W.; Brünig, H.
    Neuartige textile Scaffolds für das Tissue Engineering / Novel textile scaffolds for tissue engineering more
    Technische Textilien/Technical Textiles 49 (2006) 198-199 / E150-E151


  213. Wagenknecht, U.; Wiessner, S.; Heinrich, G.; Michael, H.; Zichner, M.
    Effects of interface reactions in compatibilised ground tyre rubber polypropylene elastomic alloys more
    Plastics, Rubber and Composites 35 (2006) 393-400


  214. Beyreuther, R.; Brünig, H.
    Modelling and Application in Fibre and Textile Industry more
    Springer (2006) 365 : Ill., graph. Darst.


  215. Kelnar, I.; Scudla, J.; Kotek, J.; Kretzschmar, B.; Leuteritz, A.
    J-integral evaluation of PA6 nanocomposite with improved toughness more
    Polymer Testing 25 (2006) 697-700


  216. Costa, F. R.; Wagenknecht, U.; Jehnichen, D.; Heinrich, G.
    Nanocomposites based on polyethylene and Mg-Al layered double hydroxide: characterization of modified clay, morphological and rheological analysis of the nanocomposites more
    Plastics, Rubber and Composites 35 (2006) 139-148


  217. Costa, F. R.; Satapathy, B.K.; Wagenknecht, U.; Weidisch, R.; Heinrich, G.
    Morphology and fracture behaviour of polyethylene/Mg-Al layered double hydroxide (LDH) nanocomposites more
    European Polymer Journal 42 (2006) 2140-2152


  218. Vogel, R.; Tändler, B.; Häußler, L.; Jehnichen, D.; Brünig, H.
    Melt Spinning of Poly(3-hydroxybutyrate) Fibers for Tissue Engineering using a-Cyclodextrin/Polymer Inclusion Complexes as Nucleation Agent more
    Macromolecular Bioscience 6 (2006) 730-736


  219. Khonakdar, H. A.; Jafari, S.H.; Taheri, M.; Wagenknecht, U.; Jehnichen, D.; Häußler, L.
    Thermal and Wide Angle X-ray Analysis of Chemically and Radiation-Crosslinked Low and High Density Polethylene more
    Journal of Applied Polymer Science 100 (2006) 3264-3271


  220. Costa, F. R.; Wagenknecht, U.; Jehnichen, D.; Abdel-Goad, M.; Heinrich, G.
    Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. Part II. Rheological characterization more
    Polymer 47 (2006) 1649-1660


  221. Gahleitner, M.; Kretzschmar, B.; Van Vliet, G.; Devaux, J.; Pospiech, D.; Bernreitner, K.; Ingolic, E.
    Rheology/Morphology Interactions in Polypropylene/Polyamide-6 Nanocomposites more
    Rheologica Acta 45 (2006) 322-330


  222. Vogel, R.; Brünig, H.; Häußler, L.; Hatzikiriakos, S.G.
    Influence of Processing Aids on the Uniaxial Extensinal Behavior of Metallocene Polyethylenes more
    Polymer Engineering and Science 46 (2006) 735-742


  223. Messerschmidt, M.; Leuteritz, A.; Fleischmann, S.; Voit, B.
    Adjustable nanostructure in thin films of p-hydroxy-styrene polymers prepared by controlled radical polymerization more
    Polymer Preprints 47 (2006) 506


  224. Khonakdar, H. A.; Jafari, S.H.; Wagenknecht, U.; Jehnichen, D.
    Effect of electron-irradiation on cross-link density and crystalline structure of low- and high-density polyethylene more
    Radiation Physics and Chemistry 75 (2006) 78-86


  225. Gahleitner, M.; Kretzschmar, B.; Pospiech, D.; Ingolic, E.; Reichelt, N.; Bernreitner, K.
    Morphology and Mechanical Properties of Polypropylene/Polyamide 6 Nanocomposites Prepared by a Two-Step Melt-Compounding Process more
    Journal of Applied Polymer Science 100 (2006) 283-291


  226. Pötschke, P.; Brünig, H.; Janke, A.; Fischer, D.; Jehnichen, D.
    Orientation of multiwalled carbon nanotubes in composites with polycarbonate by melt spinning more
    Polymer 46 (2005) 10355-10363


  227. Gliesche, K.; Breier, A.; Schmack, G.
    Herstellung textiler Scaffolds mittels Sticktechnik more
    Biomaterialien 6 (2005) 155-159


  228. Costa, F. R.; Abdel-Goad, M.; Wagenknecht, U.; Heinrich, G.
    Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. I. Synthesis and characterization more
    Polymer 46 (2005) 4447-4453


  229. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Willeke, M.; Jehnichen, D.; Jentzsch, U.; Grundke, K.; Janke, A.
    Properties of Polypropylene Clay Nanocomposites modified with difunctional compounds more
    Composite Interfaces 12 (2005) 231-242


  230. Fahmi, A.; Brünig, H.; Weidisch, R.; Stamm, M.
    Organisation of Designed Nanofibres Assembled in Filament via Flow Alignment more
    Macromolecular Materials and Engineering 290 (2005) 136-142


  231. Heinrich, G.; Costa, F. R.; Abdel-Goad, M.; Wagenknecht, U.; Lauke, B.; Härtel, V.; Tschimmel, J.; Klüppel, M.; Sviskov, A.L.
    Structural Kinetics in Filled Elastomers and PE/LDH Composites more
    Kautschuk Gummi Kunststoffe 58 (2005) 163-167


  232. Khonakdar, H. A.; Jafari, S.H.; Yavari, A.; Asadinezhad, A.; Wagenknecht, U.
    Rheology, morphology and estimation of interfacial tension of LDPE/EVA and HDPE/EVA blends more
    Polymer Bulletin 54 (2005) 75-84


  233. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Willeke, M.; Jehnichen, D.; Jentzsch, U.; Grundke, K.; Janke, A.
    Polypropylene-Clay Nanocomposites: Comparison of Different Layered Silicates more
    Macromolecular Symposia 221 (2005) 53-61


  234. Wagenknecht, U.; Steglich, S.; Wiessner, S.; Michael, H.
    Rubber Powder - A Perspective Filler of Thermoplastics more
    Macromolecular Symposia 221 (2005) 237-245


  235. Fischer, D.; Pötschke, P.; Brünig, H.; Janke, A.
    Investigation of the Orientation in Composite Fibers of Polycarbonate with Multiwalled Carbon Nanotubes by Raman Microscopy more
    Macromolecular Symposia 230 (2005) 167-172


  236. Golzar, M.; Beyreuther, R.; Brünig, H.; Tändler, B.; Vogel, R.
    Online Temperature Measurement and Simultaneous Diameter Estimation of Fibres by Thermography of the Spinnline in the Melt Spinning Process more
    Advances in Polymer Technology 23 (2004) 176-185


  237. Khonakdar, H. A.; Wagenknecht, U.; Jafari, S.H.; Häßler, R.; Eslami, H.
    Dynamic Mechanical Properties and Morphology of Polyethylene/Ethylene Vinyl Acetate Copolymer Blends more
    Advances in Polymer Technology 23 (2004) 304-315


  238. Pospiech, D.; Kretzschmar, B.; Leuteritz, A.; Willeke, M.; Jehnichen, D.; Janke, A.; Grundke, K.
    Nanocomposites mit natürlichen Schichtsilikaten more
    Wissenschaftliche Beiträge der Fachhochschule Lausitz III (2004)


  239. Petzold, G.; Geißler, U.; Smolka, N.; Schwarz, S.
    Influence of humic acid on the flocculation of clay more
    Colloid and Polymer Science 282 (2004) 670-676


  240. Khonakdar, H. A.; Morshedian, J.; Wagenknecht, U.; Jafari, S.H.
    An investigation of chemical crosslinking effect on properties of high-density polyethylene more
    Polymer 44 (2003) 4301-4309


  241. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Willeke, M.; Jehnichen, D.; Jentzsch, U.; Grundke, K.; Janke, A.
    Progress in Polypropylene-Nanocomposite Development more
    Advanced Engineering Materials 5 (2003) 678-681


  242. Khonakdar, H. A.; Morshedian, J.; Mehrabzadeh, M.; Wagenknecht, U.; Jafari, S.H.
    Thermal and shrinkage Behaviour of stretched peroxide-crosslinked high-density polyethylene more
    European Polymer Journal 39 (2003) 1729-1734


  243. Vogel, R.; Hatzikiriakos, S.G.; Brünig, H.; Tändler, B.; Golzar, M.
    Improved Spinnability of Metallocene Polyethylenes by Using Processing Aids more
    International Polymer Processing 18 (2003) 67-73


  244. Brünig, H.; Tändler, B.
    A new Method to Determine the Filament Force Tension within the Fibre Formation Zone more
    International Polymer Processing 18 (2003) 41-45


  245. Brünig, H.; Beyreuther, R.; Vogel, R.; Tändler, B.
    Melt spinning of fine and ultra-fine PEEK-filaments more
    Journal of Materials Science 38 (2003) 2149-2153


  246. Wagenknecht, U.; Kretzschmar, B.; Reinhardt, G.
    Investigations of Fire Retardant Properties of Polypropylene-Clay-Nanocomposites more
    Macromolecular Symposia 194 (2003) 207-212


  247. Jenschke, W.; Dorschner, H.; Arnold, D.; Stephan, M.; Brünig, H.
    Schnell - Heizapparatur für die strahlenchemische Modifizierung von Polymerfolien im Schmelzezustand more
    Technisches Messen 70 (2003) 323-328


  248. Pospiech, D.; Jehnichen, D.; Kretzschmar, B.; Leuteritz, A.; Grundke, K.; Janke, A.
    Investigation of the Exfoliation Process in Polypropylene Nanocomposites more
    Macromolecular Chemistry and Physics 204 (2003) F48-F50


  249. Kravtsov, A.; Brünig, H.; Zotov, S.V.
    Analysis of the polarization state of melt-spun polypropylene fibers more
    Journal of Materials Processing Technology 124 (2002) 160-165


  250. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Jehnichen, D.; Heger, K.; Jentzsch, U.; Wagenknecht, U.
    Design of interface in polypropylene-clay nanocomposites more
    Polymeric Materials: Science and Engineering 87 (2002) 297-299


  251. Leuteritz, A.; Messerschmidt, M.; Voit, B.; Yin, M.; Krause, T.; Habicher, W.D.
    Synthesis of orthogonally protected narrowly distributed block copolymers of hydroxystyrene more
    Polymer Preprints 43 (2002) 283-284


  252. Beyreuther, R.; Brünig, H.; Vogel, R.
    Preferable Filament Diameter Ratios of Hybrid Yarn Components for Optimized Longfiber Reinforced Thermoplastics more
    International Polymer Processing 17 (2002) 153-157


  253. Datsyuk, V.; Häußler, L.; Wagenknecht, U.; Voronov, S.; Tokarev, V.; Bednarska, O.
    Polypropylene/Polyperoxide Interaction in the Melt Phase more
    Macromolecular Symposia 164 (2001) 357-367


  254. Petzold, G.; Lunkwitz, K.; Geißler, U.; Smolka, N.
    Effektives Flockungsmittelsystem zur Klärung anorganischer Trüben more
    WLB Wasser, Luft und Boden 45 (2001)


  255. Wolf, D.; Wagenknecht, U.; Kretzschmar, B.
    Interface Controlled Materials
    Nanocomposites of the Polyolefine Clay Type - New Products Using a Novel Compounding Technique
    more
    Wiley-VCH (2000) 189-193


  256. Geißler, U.; Kunze, K.; Kretzschmar, B.; Lunkwitz, K.
    Gleitlagerwerkstoffe auf der Basis von POM/PTFE-Compounds more
    Tribologie und Schmierungstechnik 47 (2000) 48-50


  257. Kravtsov, A.; Brünig, H.; Zhandarov, S.; Beyreuther, R.
    The Electret Effect in Polypropylene Fibers Treated in a Corona Discharge more
    Advances in Polymer Technology 19 (2000) 312-316


  258. Kravtsov, A.; Brünig, H.
    Features of electret charge formation in polypropylene fibers more
    Chimiceskie volokna (2000) 36-41


  259. Voronov, S.; Tokarev, V.; Datsyuk, V.; Seredyuk, V.; Bednarska, O.; Oduola, K.; Adler, H.; Puschke, C.; Pich, A.; Wagenknecht, U.
    Polyperoxidic Surfactants for Interface Modification and Compatibilization of Polymer Colloidal Systems. II. Design of Compatibilizing Layers more
    Journal of Applied Polymer Science 76 (2000) 1228-1239


 
Publications
Publikationen

Departments

Processing

News