Departments > Reactive Processing > Publications

Publications

  1. Hoffmann, T.; Heller, M.; Engelhardt, T.; Taeger, A.; Marks, H.; Lehmann, D.
    Strahlenchemisches Recycling von PTFE-Materialien more
    GAK : Gummi Fasern Kunststoffe 65 (2012) 784-789


  2. Gedan-Smolka, M.; Strohbeck, U.; Demmler, M.
    Tiefziehfähige Niedertemperatur (NT)-Pulverlacke für schnelle Beschichtungsprozesse more
    in: besser lackieren! Jahrbuch 2013 (Vincentz Network 2012) , 186-195


  3. Hoffmann, T.; Lehmann, D.
    Chemical modification of poly(tetrafluoroethylene) micropowder - basis for special lubricant additives more
    Lubrication Science 24 (2012) 313-327


  4. Nagel, J.; Heinrich, G.
    Temperature transitions on the surface of a thermoplastic melt during injection moulding and its use for chemical reactions more
    International Journal of Heat and Mass Transfer 55 (2012) 6890-6896


  5. Frick, A.; Sich, D.; Heinrich, G.; Lehmann, D.; Gohs, U.; Stern, C.
    Properties of melt processable PTFE/PEEK blends: the effect of reactive compatibilization using electron beam irradiated melt processable PTFE more
    Journal of Applied Polymer Science 128 (2012) 1815-1827


  6. Bräuer, M.; Edelmann, M.; Häußler, L.; Kühnert, I.
    Metall-Kunststoff-Verbunde: Untersuchungen zur Wirkungsweise einer Adhäsionsschicht aus Uretdionpulverlacksystemen more
    Materialwissenschaft und Werkstofftechnik 43 (2012) 534-543


  7. Vogel, C.; Müller, A.; Lehmann, D.; Taeger, F.
    Characterization of the Burning behaviour of plastics by a new method more
    Open Journal of Polymer Chemistry 2 (2012) 86-90


  8. Drummer, D.; Schmidt, A.; Seefried, A.; Ehrenstein, G.W.; Kühnert, I.
    Einfluss der Prozessführung auf die Bauteileigenschaften bei der Druckverfestigung amorpher Thermoplaste more
    Zeitschrift Kunststofftechnik / Journal of Plastics Technology 8 (2012) 139-178


  9. Jungmeier, A.; Wildner, W.; Drummer, D.; Kühnert, I.
    Compression induced solidification - a novel processing technique for precise thermoplastic optical components with negligible internal stresses more
    ISRN Optics (2012) Article online, 10p.


  10. Hoffmann, T.; Friedel, P.; Harnisch, C.; Häußler, L.; Pospiech, D.
    Investigation of thermal decomposition in phosphonic acids more
    Journal of Analytical and Applied Pyrolysis 96 (2012) 43-53


  11. Hoffmann, T.; Engelhardt, T.; Lehmann, D.
    Hochleistungsschmierstoffe auf der Basis von PTFE-Öl-Dispersionen - Herstellung und Eigenschaften more
    Tribologie und Schmierungstechnik 59 (2012) 18-23


  12. Vogel, C.; Meier-Haack, J.
    Catalytic Cs2CO3 promotes "silyl method"-type polycondensation more
    Open Journal of Polymer Chemistry 2 (2012) 21-29


  13. John, A.; Nagel, J.; Heinrich, G.
    Monte-Carlo simulation of compatibilization by network-building and catalytic interface reactions in two-component injection molding more
    The Open Macromolecules Journal 6 (2012) 1-18


  14. Hoffmann, T.; Lehmann, D.; Schäffler, M.
    Additives for lubricants containing poly(tetrafluoroethylene). Part 2: Tribological characterization more
    Journal of Engineering Tribology 226 (2012) 222-229


  15. Hoffmann, T.; Lehmann, D.; Schäffler, M.
    Additives for lubricants containing poly(tetrafluoroethylene). Part 1: Synthesis and rheological characterization more
    Journal of Engineering Tribology 226 (2012) 213-221


  16. Zimmerer, C.; Nagel, J.; Steiner, G.; Heinrich, G.
    Conductive polymers for elevated temperature applications based on sodium sulfosuccinate coupled poly(ethylene glycol)s more
    Macromolecular Chemistry and Physics 212 (2011) 2641-2647


  17. Gedan-Smolka, M.; Strohbeck, U.; Demmler, M.; Cudazzo, M.; Vogelsang, H.; Tuschla, M.
    Automobilteile aus vorbeschichtetem Blech more
    Metalloberfläche 65 (2011) 28-30


  18. Nagel, J.; Chunsod, P.; Zimmerer, C.; Simon, F.; Janke, A.; Heinrich, G.
    Immobilization of gold nanoparticles on a polycarbonate surface layer during molding more
    Materials Chemistry and Physics 129 (2011) 599-604


  19. Taeger, F.; Häußler, L.; Lehmann, D.
    Chemical cross-linking during fires more
    Kunststoffe international (2011) 46-49


  20. Gedan-Smolka, M.; Tuschla, M.; Strohbeck, U.; Vogelsang, H.; Cudazzo, M.; Demmler, M.
    Aluminium-Bleche erst pulvern, dann umformen. Effiziente Verfahrens-Kombination aus umformstabilen Pulverlacksystemen, Hochleistungs-IR-Strahlen und pistolenloser Beschichtungsanlagen more
    Besser Lackieren (2011) 7


  21. Vogel, C.; Komber, H.; Quetschke, A.; Butwilowski, W.; Pötschke, A.; Meier-Haack, J.
    Side-chain sulfonated random and multiblock poly(ether sulfone)s for PEM applications more
    Reactive & Functional Polymers 71 (2011) 828-842


  22. Taeger, F.; Häußler, L.; Lehmann, D.
    Chemische Vernetzung im Brandfall - Chemical Cross-Linking During Fires more
    Kunststoffe 101 (2011) 75-78


  23. Gedan-Smolka, M.; Müller, A.; Gohs, U.; Calvimontes, A.
    Electron pretreatment of sheet molding compounds (SMC) more
    Progress in Organic Coatings (2011) 159-167


  24. John, A.; Nagel, J.; Heinrich, G.
    Compatibilization in two-component injection molding by means of split type reactions exhibiting differently located reactive sites - a Monte Carlo simulation study more
    The Open Macromolecules Journal 5 (2011) 1-12


  25. Stephan, M.; Große, S.
    Fotometrische Verfahren more
    in: Prozessmesstechnik in der Kunststoffaufbereitung, Th. Hochrein, ed. (Vogel Industrie Medien GmbH & Co.KG 2011) , ...


  26. Taeger, A.; Gedan-Smolka, M.; Lilie, B.; Krug, D.
    Polymere Antistatikadditive für Holzwerkstoffe more
    Holztechnologie 52 (2011) 23-27


  27. Lehmann, D.
    Mit interdisziplinärer Forschung zu Hochleistungsschmierstoffen und Hochleistungswerkstoffen more
    Dresdner Transferbrief 3.10 (2010) 11


  28. Lehmann, D.
    Melt Modification of Polyamides more
    in: Polymers - Opportunities and Risks II: Sustainability. Product Design and Processing, P. Eyerer et al., ed. (Springer 2010) 12, 163-192


  29. Meier-Haack, J.; Müller, M.; Lunkwitz, K.
    Polymer membranes for sustainable technologies more
    in: Polymers - Opportunities and Risks II: Sustainability. Product Design and Processing, P. Eyerer et al., ed. (Springer 2010) 12, 281-297


  30. Hoffmann, T.; Pospiech, D.; Häußler, L.; Sahre, K.; Komber, H.; Harnisch, C.; Auf der Landwehr, M.; Schäfer, A.; Döring, M.
    Phosphorus-containing polysulfones - a comparative study more
    High Performance Polymers 22 (2010) 715-741


  31. Bräuer, M.; Wießner, S.; Edelmann, M.; Gedan-Smolka, M.; Hupfer, B.; Lehmann, D.; Nagel, J.; Schneider, K.
    Verbundspritzgießen auf pulverlackierte Bleche more
    Kautschuk Gummi Kunststoffe 63 (2010) 12-19


  32. Härtig, T.; Nagel, J.; Lehmann, D.; Heinrich, G.
    Process-integrated surface modification during injection molding more
    Kunststoffe international : magazine for plastics ; official voice of German Plastics Associations (2010) 31-35


  33. Härtig, T.; Nagel, J.; Gehde, M.
    Prozessintegrierte Oberflächenmodifizierung more
    Kunststoffe 100 (2010) 38-42


  34. Edelmann, M.; Heinrich, G.
    Thermokinetic analysis of two-step curing reactions in melt: Part II. Investigation of polymeric model systems more
    Thermochimica Acta 499 (2010) 160-165


  35. Bahners, T.; Hoffmann, G.; Nagel, J.; Schollmeyer, E.; Voigt, A.
    The effect of a plasma pre-treatment on the quality of flock coatings on polymer substrates more
    in: Contact Angle, Wettability and Adhesion ; Volume 6, Kash Mittal , ed. (Brill Academic Pub. 2009) , 325-340


  36. Khan, M. Sohail; Lehmann, D.; Heinrich, G.
    Newly developed chloroprene rubber composites based on electron-modified polytetrafluoroethylene powder more
    Acta Materialia 57 (2009) 4882-4890


  37. Khan, M. Sohail; Franke, R.; Lehmann, D.; Heinrich, G.
    Physical and tribological properties of PTFE micropowder-filled EPDM rubber more
    Tribology International 42 (2009) 890-896


  38. Gedan-Smolka, M.; Tuschla, M.; Winkler, C.; Alfort, H.-J.; Herrmann, T.
    Spannungsrisse vermeiden - Neue Pulverklarlack-Basisrezeptur more
    Journal für Oberflächentechnik : JOT 49 (2009) 48-51


  39. Gedan-Smolka, M.; Tuschla, M.; Winkler, C.; Alfort, H.-J.; Herrmann, T.
    Spannungsrissbeständigkeit von Pulverklarlacken more
    Journal für Oberflächentechnik : JOT 49 (2009) 24-27


  40. Kalaivani, S.; Vijayabaskar, V.; Thunga, M.; Stephan, M.; Dorschner, H.; Heinrich, G.; Bhowmick, A. K.; Wagenknecht, U.
    Effect of irradiation temperatures on nitrile rubber nanocomposites more
    Plastics, Rubber and Composites 38 (2009) 39-45


  41. Khan, M. Sohail; Lehmann, D.; Heinrich, G.; Gohs, U.; Franke, R.
    Structure-property effects on mechanical, friction and wear properties of electron modified PTFE filled EPDM composite more
    eXPRESS Polymer Letters 3 (2009) 39-48


  42. Khan, M. Sohail; Franke, R.; Gohs, U.; Lehmann, D.; Heinrich, G.
    Friction and wear behaviour of electron beam modified PTFE filled EPDM compounds more
    Wear 266 (2009) 175-183


  43. Khan, M. Sohail; Lehmann, D.; Heinrich, G.; Franke, R.
    Tribological study of peroxide-cured EPDM rubber filled with electron beam irradiated PTFE powder more
    Wear 266 (2009) 200-207


  44. Herrmann, T.; Gedan-Smolka, M.; Winkler, C.
    Auswertung von Schadensfällen - Spannungsrisse in Pulverbeschichtungen more
    JOT + Oberflächen : Journal für Oberflächentechnik (2008) 28-32


  45. Pospiech, D.; Jehnichen, D.; Komber, H.; Korwitz, A.; Janke, A.; Hoffmann, T.; Kretzschmar, B.; Reuter, U.; Döring, M.; Seibold, S.; Perez Graterol, R.; Sandler, J.; Altstädt, V.; Bellucci, F.; Camino, G.
    New polymers for tailor-made nanocomposites more
    Journal of Nanostructured Polymers and Nanocomposites 4 (2008) 62-75


  46. Bräuer, M.; Tändler, B.; Komber, H.; Pompe, G.; Bellmann, C.; Brünig, H.; Hess, C.
    Beiträge zum Reaktionsmechanismus des Elastanfaserschmelzspinnens nach dem Vernetzerverfahren more
    Kautschuk Gummi Kunststoffe 61 (2008) 531-539


  47. Maier, G.; Meier-Haack, J.
    Sulfonated aromatic polymers for fuel cell membranes more
    in: Advances in Polymer Science, Günther G. Scherer, ed. (Springer 2008) 216, 1-62


  48. Schulze, U.; Sen Majumder, P.; Heinrich, G.; Stephan, M.; Gohs, U.
    Electron beam crosslinking of atactic polypropylene: Development of a potential novel elastomer more
    Macromolecular Materials and Engineering 293 (2008) 692-699


  49. Edelmann, M.; Gedan-Smolka, M.; Demmler, M.
    Forming stable polyallophanate powder coatings with excellent weathering stability more
    Paint & Coatings Industry (2008) 38-44


  50. Stephan, M.; Gohs, U.;Heinrich, G.; Volke, S.; Wagenknecht, U.
    Electron Treatment of Thermoplastics under Reactive Conditions more
    Proceedings of the Polymer Processing Society 24th Annual Meeting (2008) 3 Pages


  51. Große, S.; Blankschein, U.; Stephan, M.; Stintz, M.
    Realtime Monitoring of Particles and Inhomogeneities in Flowing Polymer Melts at Extrusion and Injection Molding Processing more
    Proceedings of the Polymer Processing Society 24th Annual Meeting (2008) 3 Pages


  52. Gohs, U.; Heinrich, G.; Stephan, M.; Volke, S.; Wagenknecht, U.
    Electron Treatment of Polymer Melts under Static and Mixing Conditions more
    Proceedings of the Polymer Processing Society 24th Annual Meeting (2008) 3 Pages


  53. Khan, M. Sohail; Lehmann, D.; Heinrich, G.
    Modification of PTFE nanopowder by controlled-electron beam irradiation: A useful approach for the development of PTFE coupled EPDM compounds more
    eXPRESS Polymer Letters 2 (2008) 284-293


  54. Slouf, M.; Synkova, H.; Baldrian, J.; Marek, A.; Kovarova, J.; Schmidt, P.; Stephan, M.; Dorschner, H.; Gohs, U.
    Structural changes of UHMWPE after e-beam irradiation and thermal treatment more
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 85 (2008) 240-251


  55. Vijayabaskar, V.; Stephan, M.; Kalaivani, S.; Volke, S.; Heinrich, G.; Dorschner, H.; Bhowmick, A. K.; Wagenknecht, U.
    Influence of radiation temperature on the crosslinking of nitrile rubber by electron beam irradiation more
    Radiation Physics and Chemistry 77 (2008) 511-521


  56. Hoffmann, T.; Pospiech, D.; Häußler, L.; Pötschke, P.; Reuter, U.; Werner, P.; Sandler, J.; Döring, M.; Altstädt, V.
    Properties of segmented block copolymers in PEEK/PSU blends more
    High Performance Polymers 20 (2007) 601-614


  57. Hupfer, B.; Bräuer, M.; Lehmann, D.; Reuter, U.; Günther, T.
    Verbundfestigkeiten bei Zweikomponentenanwendungen - Zugversuch und Schälversuch im Vergleich more
    Kautschuk Gummi Kunststoffe 60 (2007) 592-596


  58. Meier-Haack, J.; Derenko, S.; Seng, J.
    Fouling reduction by graft-modification with hydrophilic polymers more
    Separation Science and Technology 42 (2007) 2881-2889


  59. Meier-Haack, J.; Vogel, C.; Butwilowski, W.; Lehmann, D.
    Sulfonated Poly(ether sulfone)s for Fuel Cells by Solvent-Free Polymerization more
    Pure and Applied Chemistry 79 (2007) 2083-2093


  60. Stephan, M.; Vijayabaskar, V.; Kalaivani, S.; Volke, S.; Heinrich, G.; Dorschner, H.; Wagenknecht, U.; Bhowmick, A. K.
    Crosslinking of nitrile rubber by electron beam irradiation at elevated temperatures more
    Kautschuk Gummi Kunststoffe 60 (2007) 542-547


  61. Pospiech, D.; Korwitz, A.; Komber, H.; Voigt, D.; Jehnichen, D.; Müller, J.; Janke, A.; Hoffmann, T.; Kretzschmar, B.
    In situ synthesis of poly(ethylene terephthalate)/layered silicate nanocomposites by polycondensation more
    High Performance Polymers 19 (2007) 565-580


  62. Franke, R.; Haase, I.; Lehmann, D.; Hupfer, B.; Janke, A.
    Manufacturing and tribological properties of sandwich materials with chemically bonded PTFE-PA 66 und PA 66/GF more
    Wear 262 (2007) 958-971


  63. John, A.; Nagel, J.; Heinrich, G.
    Monte Carlo simulation of polymer reactions at interfaces more
    Macromolecular Theory and Simulations 16 (2007) 430-440


  64. Meier-Haack, J.; Komber, H.; Vogel, C.; Butwilowski, W.; Schlenstedt, K.; Lehmann, D.
    Side-chain sulfonated poly(arylene ether)s for fuel cell applications more
    Macromolecular Symposia 254 (2007) 322-328


  65. Böhme, U.; Vogel, C.; Meier-Haack, J.; Scheler, U.
    Determination of charge and molecular weight of rigid-rod polyelectrolytes more
    Journal of Physical Chemistry / B 111 (2007) 8344-8347


  66. Nagel, J.; Brunotte, R.; Hupfer, B.; Grundke, K.; Lehmann, D.; Mennig, G.
    Investigations into the chemical modification of polyolefin by radical reactions during molding more
    Macromolecular Reaction Engineering 1 (2007) 480-487


  67. Perez, R. M.; Sandler, J.; Altstädt, V.; Hoffmann, T.; Pospiech, D.; Artner, J.; Ciesielski, M.; Döring, M.; Balabanovich, A.; Knoll, U.; Braun , U.; Schartel, B.
    Novel phosphorus-containing hardeners with tailored chemical structures for epoxy resins: Synthesis and cured resin properties more
    Journal of Applied Polymer Science 105 (2007) 2744-2759


  68. Khan, M. Sohail; Lehmann, D.; Heinrich, G.
    Properties of the EPDM with modified PTFE nanopowder more
    Kautschuk Gummi Kunststoffe 60 (2007) 226-234


  69. Sagidullin, A; Meier-Haack, J.; Scheler, U.
    Molecular mobility and transport in polymer membranes and polyelectrolyte multilayers more
    Magnetic Resonance Imaging 25 (2007) 541-543


  70. Sahre, K.; Hoffmann, T.; Pospiech, D.; Eichhorn, K.-J.; Fischer, D.; Voit, B.
    Der direkte Blick auf die Reaktion more
    Process 14 (2007) 40-41


  71. Perez, R. M.; Sandler, J.; Altstädt, V.; Hoffmann, T.; Pospiech, D.; Ciesielski, M.; Döring, M.; Braun , U.; Balabanovich, A.; Schartel, B.
    Novel phosphorus-modified polysulfone as a combined flame retardant and toughness modifier for epoxy resins more
    Polymer 48 (2007) 778-790


  72. Böhme, U.; Vogel, C.; Meier-Haack, J.; Scheler, U.
    Determination of the effective charge and molecular wight of polyelectrolytes by electrophoresis NMR more
    Macromolecular Reaction Engineering 1 (2007) F63-F64


  73. Schartel, B.; Balabanovich, A.; Braun , U.; Knoll, U.; Artner, J.; Ciesielski, M.; Döring, M.; Perez, R.; Sandler, J.; Altstädt, V.; Hoffmann, T.; Pospiech, D.
    Pyrolysis of epoxy resins and fire behavior of epoxy resin composites flame-retarded with 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide additives more
    Journal of Applied Polymer Science 104 (2007) 2260-2269


  74. Franke, R.; Lehmann, D.; Kunze, K.
    Tribological behavior of new chemical bonded PTFE polyamide compounds more
    Wear 262 (2007) 242-252


  75. Meier-Haack, J.
    Untersuchungen zum Einfluss von Membranmodifizierungen auf das Fouling unter Berücksichtigung des "critical flux" more
    Newsletter SIMA-tec 3 (2007) 1-5


  76. Hoffmann, T.; Pospiech, D.; Kretzschmar, B.; Reuter, U.; Häußler, L.; Eckert, F.; Perez Graterol, R.; Sandler, J.; Altstädt, V.
    Modification of polysulfones by carboxylic acids more
    High Performance Polymers 19 (2007) 48-61


  77. Stephan, M.; Große, S.; Stintz, M.; Blankschein, U.
    Microphotometric Inline Determination of Polymer Blend Morphologies during Extrusion Processing more
    Journal of Applied Polymer Science 2003 (2007) 258-262


  78. Edelmann, M.; Gedan-Smolka, M.; Heinrich, G.; Lehmann, D.
    Thermokinetic analysis of two-step curing reactions in melt - Part I. Investigation of low molecular model systems more
    Thermochimica Acta 452 (2007) 59-64


  79. Gedan-Smolka, M.; Demmler, M.; Edelmann, M.; Töpfer, A.
    Shapable weather-resistant low temperature thermosetting uretdione powder coating prototypes more
    Pitture e Vernici - Europeans Coating 82 (2006) 19-28


  80. Brunotte, R.; Mennig, G.; Nagel, J.
    In-situ surface modification of polycarbonate during injection moulding more
    International Journal of Plastics Technology (2006) 1-7


  81. Perez, R. M.; Sandler, J.; Altstädt, V.; Hoffmann, T.; Pospiech, D.; Artner, J.; Ciesielski, M.; Döring, M.; Balabanovich, A.; Schartel, B.
    Effective halogen-free flame retardancy for a monocomponent polyfunctional epoxy using an oligomeric organophosphorus compound more
    Journal of Materials Science 41 (2006) 8347-8351


  82. Braun , U.; Balabanovich, A.; Schartel, B.; Knoll, U.; Artner, J.; Ciesielski, M.; Döring, M.; Perez Graterol, R.; Sandler, J.; Altstädt, V.; Hoffmann, T.; Pospiech, D.
    Influence of the oxidation state of phosphorus on the decomposition and fire behaviour of flame-retarded epoxy resin composites more
    Polymer 47 (2006) 8495-8508


  83. Stephan, M.; Große, S.; Stintz, M.; Blankschein, U.
    Real time detection of particulate heterogeneities in polymer extrusion processes using microphotometric measuring method more
    Plastics, Rubber and Composites 35 (2006) 432-438


  84. Gedan-Smolka, M.; Edelmann, M.; Demmler, M.
    Erst Pulvern, dann Umformen. Wetterstabile, tiefziehbare Niedrigtemperatur-Pulverlacke für Aluminium more
    Farbe und Lack 112 (2006) 22-27


  85. Blankschein, U.; Stephan, M.; Große, S.
    Saubere Sache - Verunreinigung in Kunststoffschmelzen detektieren more
    Kunststoff-Magazin (2006) 40-41


  86. Edelmann, M.; Gedan-Smolka, M.; Lehmann, D.
    Influence of various catalysts on the 1,3-diacetidine-2,4-dione (uretdione) reaction with hydroxyl groups more
    Progress in Organic Coatings 57 (2006) 251-258


  87. Sahre, K.; Hoffmann, T.; Pospiech, D.; Eichhorn, K.-J.; Fischer, D.; Voit, B.
    Monitoring of the polycondensation reaction of Bisphenol A and 4,4'-dichlorodiphenylsulfone towards polysulfone (PSU) by real-time ATR-FTIR spectrocopy more
    European Polymer Journal 42 (2006) 2292-2301


  88. Blinzler, M.; Stephan, M.; Große, S.
    Echtzeit-Qualitätskontrolle von Polymerschmelzen mittels Mikro-Photometrie more
    Chemie Ingenieur Technik (2006) 1323


  89. Braun , U.; Knoll, U.; Schartel, B.; Hoffmann, T.; Pospiech, D.; Artner, J.; Ciesieski, M.; Döring, M.; Perez-Graterol, R.; Sandler, J.; Altstädt, V.
    Novel Phosphorus-Containing Poly(ether sulfone)s and Their Blends with an Epoxy Resin: Thermal Decomposition and Fire Retardancy more
    Macromolecular Chemistry and Physics 207 (2006) 1501-1514


  90. Meier-Haack, J.; Vogel, C.; Butwilowski, W.; Lehmann, D.
    Fuel cell membranes via solvent-free polymerization more
    Desalination 200 (2006) 299-301


  91. Meier-Haack, J.; Derenko, S.; Seng, J.
    Fouling reduction by graft-modification with hydrophilic polymers more
    Desalination 199 (2006) 509-511


  92. Gedan-Smolka, M.; Edelmann, M.; Demmler, M.
    Umformstabile Pulverlackierungen - Wirtschaftliche Alternative zur Stückbeschichtung more
    JOT + Oberflächen : Journal für Oberflächentechnik 46 (2006) 18-20


  93. Klüpfel, B.; Lehmann, D.
    Functionalisation of Irradiated PTFE Micropowder with Methacryl- or Hydroxy Groups for Chemical Coupling of PTFE with Different Matrix Polymers more
    Journal of Applied Polymer Science 101 (2006) 2819-2824


  94. Muthu Lakshmi, R.T.S.; Meier-Haack, J.; Schlenstedt, K.; Komber, H.; Choudhary, V.; Varma, I.K.
    Synthesis, characterisation and membrane properties of sulphonated poly(aryl ether sulphone) copolymers more
    Reactive & Functional Polymers 66 (2006) 634-644


  95. Sahre, K.; Schulze, U.; Hoffmann, T.; Abdelrehim, M.; Eichhorn, K.-J.; Pospiech, D.; Fischer, D.; Voit, B.
    Monitoring of Chemical Reactions during Polymer Synthesis by Real-Time Attenuated Total Reflection (ATR)-FTIR Spectroscopy more
    Journal of Applied Polymer Science 101 (2006) 11374-1380


  96. Perez, R. M.; Sandler, J.; Altstädt, V.; Hoffmann, T.; Pospiech, D.; Ciesielski, M.; Döring, M.; Braun , U.; Knoll, U.; Schartel, B.
    Effective halogen-free flame retardants for carbon fibre-reinforced epoxy composites more
    Journal of Materials Science 41 (2006) 4981-4984


  97. Pompe, G.; Bräuer, M.; Schweikle, D.; Nagel, J.; Hupfer, B.; Lehmann, D.
    Influence of the Temperature Profile in the Interface on the Bond Strength of Polyamide-Polyurethane Two-Component Tensile Bars more
    Journal of Applied Polymer Science 100 (2006) 4297-4305


  98. Bräuer, M.; Hupfer, B.; Nagel, J.; Reuter, U.
    Zweikomponenten-Spritzgießen von Hart-Weich-Verbunden : Neue Hart-Weich-Verbunde aus POM- und TPU mit POM-TPU-MDI-Blend als Hartkomponente more
    Kautschuk Gummi Kunststoffe 59 (2006) 115-121


  99. Schwarz, S.; Nagel, J.; Janke, A.; Jaeger, W.; Bratskaya, S.
    Adsorption of Polyelectrolytes with hydrophobic Parts more
    Progress in Colloid and Polymer Science 132 (2006) 102-109


  100. Salzer, R.; Zimmerer, C.; Kitsche, M.; Steiner, G.; Braun, H.-G.
    Molecular Imaging of Microstructured Polymer Surfaces more
    Progress in Colloid and Polymer Science 132 (2006) 7-15


  101. Nagel, J.; Scheidler, D.; Hupfer, B.; Bräuer, M.; Pleul, D.; Vogel, C.; Lehmann, D.; Amesöder, S.
    Blends of polypropylene, grafted with acrylic acid and maleic anhydride, with PA6 and its use in composites with polyamide 6 by two-component injection molding more
    Journal of Applied Polymer Science 100 (2006) 2992-2999


  102. Hoffmann, T.; Sahre, K.; Pospiech, D.; Fischer, D.; Eichhorn, K.-J.; Voit, B.; Long, T.
    Real-time monitoring of polycondensation reactions by ATR-FTIR spectroscopy more
    Macromolecular Bioscience 6 (2006) F72-F73


  103. Perez, R. M.; Sandler, J.; Altstädt, V.; Hoffmann, T.; Pospiech, D.; Ciesielski, M.; Döring, M.
    Effect of DOP-based compounds on fire retardancy, thermal stability, and mechanical properties of DGEBA cured with 4,4'-DDS more
    Journal of Materials Science 41 (2006) 341-353


  104. Lehmann, D.; Adam, G.; Geißler, U.; Hupfer, B.; Janke, A.; Klüpfel, B.; Lappan, U.
    Dreimal länger haltbar more
    Kunststoffe 96 (2006) 60-63


  105. Brunotte, R.; Holz, K.; Nagel, J.
    Vorbereitung zum Lackieren und Kleben : Inline-Oberflächenmodifizierung im Spitzgießprozess more
    Kunststoffe (2006) 67-70


  106. Taeger, F.; Müller, A.; Lehmann, D.
    Charakterisierung des Brandverhaltens von Kunststoffen nach einer neuen Labormethode more
    Chemie-Ingenieur-Technik 77 (2005) 128-133


  107. He, X.; Nagel, J.; Lehmann, D.; Heinrich, G.
    Interface Structure between Immiscible Reactive Polymers under Transreaction: a Monte Carlo Simulation more
    Macromolecular Theory and Simulations 14 (2005) 305-311


  108. Lehmann, D.; Staudinger, U.; Hupfer, B.; Janke, A.; Kunze, K.; Franke, R.; Haase, I.
    Einflüsse von Verarbeitung und Feuchtegehalt auf die tribologischen Eigenschaften von chemisch gekoppelten PTFE-PA-6.6-Materialien more
    Tribologie und Schmierungstechnik 52 (2005) 13-18


  109. Sagidullin, A; Meier-Haack, J.; Scheler, U.
    Water diffusion through asymmetric polymer membranes and polyelectrolyte multilayers more
    Diffusion-Fundamentals : The Open-Access Journal for the Basic Principles of Diffusion Theory, Experiment and Application 2 (2005) 131.1-131.2 : http://www.uni-leipzig.de/diffusion/


  110. Palumbo, M.; Nagel, J.; Petty, M. C.
    Surface Plasmon Resonance Detection of Metal Ions: Layer-by-Layer Assembly of Polyelectrolyte Sensing Layers on a Multichannel Chip more
    IEEE Sensors Journal 5 (2005) 1159-1164


  111. Vogel, C.
    Named Organic Reactions more
    Wiley & Sons, Ltd. 2nd Editio (2005) X, 310 S.


  112. Krause, B.; Stephan, M.; Volkland, S.; Voigt, D.; Häußler, L.; Dorschner, H.
    Long-Chain Branching of Polypropylene by Electron-Beam Irradiation in the Molten State more
    Journal of Applied Polymer Science 99 (2005) 260-265


  113. Perez, R.; Sandler, J.; Altstädt, V.; Hoffmann, T.; Pospiech, D.; Artner, J.; Ciesielski, M.; Döring, M.; Braun , U.; Schartel, B.
    Advances in the flame Reatadancy of Polymeric Mateials
    Flame retardant epoxy resin system for liquid composite moulding applications     more
    Books on Demand (2005) 69-84


  114. Stephan, M.; Große, S.; Blankschein, U.; Stintz, M.
    Partikel - Monitoring am Extruder more
    Kunststoffe 95 (2005) 160-163


  115. Stephan, M.; Große, S.; Blankschein, U.; Stintz, M.
    Particel Monitoring on the Extruder more
    Plast Europe : Kunststoffe (2005) PE103319, 1-4


  116. Lehmann, D.; Hupfer, B.; Lappan, U.; Geißler, U.; Reinhardt, G.; Kunze, K.
    Werkstoffentwicklung aus PTFE-Glasfaser-Compound-Abfällen more
    Tribologie und Schmierungstechnik 52 (2005) 20-24


  117. Dallner, C.; Künkel, R.; Ehrenstein, G.W.; Lehmann, D.; Klüpfel, B.
    Verbesserte Gleitlager durch chemisch gekoppelte PA46-PTFE-Compounds more
    in: Maschinenelemente aus Kunststoffen : Mikrogetriebe, Zahnräder und Gleitlager (Springer-VDI-Verlag 2005) , 166-183


  118. Stephan, M.; Pospiech, D.; Heidel, R.; Hoffmann, T.; Voigt, D.; Dorschner, H.
    Electron beam irradiation of molten polysulfone more
    Polymer Degradation and Stability 90 (2005) 379-385


  119. Pompe, G.; Häußler, L.; Adam, G.; Eichhorn, K.-J.; Janke, A.; Hupfer, B.; Lehmann, D.
    Reactive Polytetrafluoroethylene/Polyamide 6 Compounds. II. Study of the Reactivity with Respect to the Funtionality of the Polytetrafluoroethylene Component and Analysis of the Notched Impact Strength of the Polytetrafluoroethylene/Polyamide 6 Compounds more
    Journal of Applied Polymer Science 98 (2005) 1317-1324


  120. Pompe, G.; Häußler, L.; Pötschke, P.; Voigt, D.; Janke, A.; Geißler, U.; Hupfer, B.; Reinhardt, G.; Lehmann, D.
    Reactive Polytetrafluoroethylene/Polyamide Compounds. I. Characterisation of the Compound Morphology with Respect to the Functionality of the Polytetrafluoroethylen Component by Microscopic and Differential Scanning Calorimetry Studies more
    Journal of Applied Polymer Science 98 (2005) 1308-1316


  121. Muthu Lakshmi, R.T.S.; Meier-Haack, J.; Schlenstedt, K.; Vogel, C.; Choudhary, V.; Varma, I.K.
    Sulphonated poly(ether ether ketone) copolymers: Synthesis, characterization and membrane properties more
    Journal of Membrane Science 261 (2005) 27-35


  122. Licea-Claverie, A.; Schwarz, S.; Simon,; Urzua-Sanchez, O.; Nagel, J.; Pleul, D.; Eichhorn, K.-J.; Janke, A.
    Poly(dimethylaminoethylmethacrylate) hydrochloride (PDMAEM-HCI) a well behaving polycation for multilayer formation on planar surfaces more
    Colloid and Polymer Science 283 (2005) 826-835


  123. Klüpfel, B.; Lehmann, D.; Heinrich, G.; Linhart, C.; Haberstroh, E.; Kunze, K.; Hufenbach, W.; Dallner, C.; Künkel, R.; Ehrenstein, G.W.
    Kopplung von PTFE und Kautschuk - Eine neue elastomere Werkstoffklasse more
    Kautschuk Gummi Kunststoffe 58 (2005) 226-229


  124. Blankschein, U.; Stephan, M.; Große, S.
    Schmelze-Inspektionssysteme: Sensoren in vielen Variationen more
    Plastverarbeiter 56 (2005) 40-41


  125. Dlubek, G.; De, U.; Pionteck, J.; Arutyonov, N. Yu.; Edelmann, M.; Krause-Rehberg, R.
    Temperature Dependence of Free Volume in Pure and Silica-Filled Poly(dimethyl siloxane) from Positron Lifetime and PVT Experiments more
    Macromolecular Chemistry and Physics 206 (2005) 827-840


  126. Hoffmann, T.; Pospiech, D.; Häußler, L.; Komber, H.; Voigt, D.; Harnisch, C.; Kollann, C.; Ciesielski, M.; Döring, M.; Perez Graterol, R.; Sandler, J.; Altstädt, V.
    Novel Phosphorous-Containing Aromatic Polyethers - Synthesis and Characterization more
    Macromolecular Chemistry and Physics 206 (2005) 423-431


  127. Meier-Haack, J.; Taeger, A.; Vogel, C.; Schlenstedt, K.; Lenk, W.; Lehmann, D.
    Membranes from sulfonated block copolymers for use in fuel cells more
    Separation and Purification Technology 41 (2005) 207-220


  128. Blankschein, U.; Stephan, M.; Große, S.
    Systeme für die optische Qualitätssicherung: Breites Spektrum more
    Plastverarbeiter 55 (2004) 56


  129. Lehmann, D.; Hupfer, B.; Lappan, U.; Geißler, U.; Reinhardt, G.; Kunze, K.
    Verwertung von PTFE-Glasfaser-Compound-Abfällen - Ergebnisse einer Wertstoffentwicklung more
    Materialwissenschaft u. Werkstofftechnik 35 (2004) 677-682


  130. Lehmann, D.; Hupfer, B.; Staudinger, U.; Häußler, L.; Jehnichen, D.; Janke, A.; Kunze, K.; Franke, R.; Haase, I.
    Reibungs- und Verschleißverhalten von chemisch gekoppelten PTFE-PA-6.6-Materialien more
    Materialwissenschaft u. Werkstofftechnik 35 (2004) 696-706


  131. Vogel, C.; Meier-Haack, J.; Taeger, A.; Lehmann, D.
    On the Stability of Selected Monomeric and Polymeric Aryl Sulfonic Acids Heating in Water (Part 1) more
    Fuel Cells 4 (2004) 320-327


  132. Meier-Haack, J.; Valko, M.; Lunkwitz, K.; Bleha, M.
    Microporous membranes from polyolefin-polyamide blend materials more
    Desalination 163 (2004) 215-221


  133. Fischer, D.; Stephan, M.
    Sensoren für die Online- und Inline-Überwachung von Extrusionsprozessen more
    Dresdner Transferbrief / TU Dresden, Wissenschaft Transfer 3 (2004) 8


  134. Stephan, M.; Große, S.; Stintz, M.; Blankschein, U.; Rudolph, A.
    Microphotometric Detection of Particles/Inhomogeneities in Flowing Polymer Melts more
    Macromolecular Symposia 217 (2004) 343-356


  135. Gedan-Smolka, M.
    Umweltfreundliche Pulverlacke konkurrenzfähig machen more
    Galvanotechnik (2004) 2242


  136. Müller, M.; Meier-Haack, J.; Schwarz, S.; Buchhammer, H.-M.; Eichhorn, K.-J.; Janke, A.; Keßler, B.; Nagel, J.; Oelmann, M.; Reihs, T.; Lunkwitz, K.
    Polyelectrolyte multilayers and their interactions more
    Journal of Adhesion 80 (2004) 521-547


  137. Nagel, J.; Bräuer, M.; Hupfer, B.; Lehmann, D.; Lunkwitz, K.
    Haftungsmodifizierung von thermoplastischem Polyurethan: Chemische Einflüsse auf die Haftung in Werkstoffverbunden mit PA 6 more
    Kautschuk Gummi Kunststoffe 57 (2004) 240-247


  138. Nagel, J.; Bräuer, M.; Hupfer, B.; Grundke, K.; Schwarz, S.; Lehmann, D.
    Investigations on the Reactive Surface Modification of Polycarbonate by Surface-Reactive Injection Molding. more
    Journal of Applied Polymer Science 93 (2004) 1186-1191


  139. Taeger, A.; Vogel, C.; Lehmann, D.; Lenk, W.; Schlenstedt, K.; Meier-Haack, J.
    Sulfonated Multiblock Copoly(ether sulfone)s as Membrane Materials for Fuel Cell Applications more
    Macromolecular Symposia 210 (2004) 175-184


  140. Schwarz, S.; Nagel, J.; Jaeger, W.
    Comparison of Polyelectrolyte Multilayers Built Up with Polydiallyldimethylammonium Chloride and Poly (ethyleneimine) from Salt-Free Solutions by in-situ Surface Plasmon Resonance Measurements more
    Macromolecular Symposia 211 (2004) 201-216


  141. Appelhans, D.; Gedan-Smolka, M.; Lehmann, D.
    Powder Coatings - Get to (very) hydrophobic surfaces more
    European Coatings Journal (2004) 24-31


  142. Hoffmann, T.; Pospiech, D.; Häußler, L.; John, A.; Friedel, P.; Komber, H.; Voigt, D.; Werner, P.; Altstädt, V.
    Synthesis of PEEK/PSU Multiblock Copolymers more
    High Performance Polymers 16 (2004) 3-20


  143. Stephan, M.; Große, S.; Ripperger, S.; Stintz, M.; Rudolph, A.; Blankschein, U.
    Echtzeit-Detektion partikulärer Inhomogenitäten in strömenden Polymerschmelzen more
    Chemie Ingenieur Technik 75 (2003) 1122-1123


  144. Meier-Haack, J.; Carroll, T.
    Use of graft-modified membranes for water treatment more
    Water Science and Technology: Water Supply 3 (2003) 385-392


  145. Bräuer, M.; Hupfer, B.; Nagel, J.; Reuter, U.
    New Hard-soft Combinations of POM and TPU more
    Kunststoffe / plast europe (2003) 32-ff.


  146. Bräuer, M.; Hupfer, B.; Nagel, J.; Reuter, U.
    Neue Hart-Weich-Verbunde aus POM und TPU : Zweikomponenten-Spritzgießen more
    Kunststoffe 93 (2003) 80-84


  147. Steiner, G.; Zimmerer, C.; Braun, H.-G.; Friedrich, S.; Salzer, R.
    Ionenkanal-Array : Eine neue Generation von Sensoren more
    Bioforum 26 (2003) 215-217


  148. Steiner, G.; Zimmerer, C.; Braun, H.-G.; Friedrich, S.; Salzer, R.
    Optical Biosensor with Ion Channel Array more
    Screening 4 (2003) 32-33


  149. Jenschke, W.; Dorschner, H.; Arnold, D.; Stephan, M.; Brünig, H.
    Schnell - Heizapparatur für die strahlenchemische Modifizierung von Polymerfolien im Schmelzezustand more
    Technisches Messen 70 (2003) 323-328


  150. Palumbo, M.; Pearson, C.; Nagel, J.; Petty, M. C.
    Surface plasmon resonance sensing of liquids using polyelectrolyte thin films more
    Sensors and Actuators / B 91 (2003) 291-297


  151. Palumbo, M.; Pearson, C.; Nagel, J.; Petty, M. C.
    A single chip multi-channel surface plasmon resonance imaging system more
    Sensors and Actuators / B 90 (2003) 264-270


  152. Pietsch, S.; Kaiser, W.D.; Hoffmann, T.
    Kontaktkorrosion von Magnesium mit organischen Beschichtungen vermeiden more
    Metalloberfläche 57 (2003) 41-44


  153. Gedan-Smolka, M.; Lehmann, D.; Lehmann, F.
    Catalysis in uretdione powder coatings enables innovative processing lines more
    Polymer Preprints 44 (2003) 58-59


  154. Taeger, A.; Vogel, C.; Lehmann, D.; Jehnichen, D.; Komber, H.; Meier-Haack, J.; Ochoa, N.A.; Nunes, S.P.; Peinemann, K.-V.
    Ion exchange membranes derived from sulfonated polyaramides more
    Reactive & Functional Polymers 57 (2003) 77-92


  155. Meier-Haack, J.; Booker, N.A.; Carroll, T.
    A permeability-controlled microfiltration membrane for reduced fouling in drinking water treatment more
    Water Research 37 (2003) 585-588


  156. Lehmann, D.; Hupfer, B.; Lappan, U.; Pompe, G.; Häußler, L.; Jehnichen, D.; Janke, A.; Geißler, U.; Reinhardt, G.; Lunkwitz, K.; Franke, R.; Kunze, K.
    New PTFE-Polyamide Compounds more
    Designed Monomers and Polymers 5 (2002) 317-324


  157. Jehnichen, D.; Pohlers, A.; Zafeiropoulos, N.E.; Kummer, S.; Schneider, K.; Lehmann, D.; Stamm, M.; Roth, S.; Burghammer, M.; Riekel, C.
    Scanning X-ray microscopy for polymer applications more
    The Europan Synchrotron Radiation Facility (2002)


  158. Meier-Haack, J.; Müller, M.
    Use of Polyelectrolyte Multilayer Systems for Membrane Modification more
    Macromolecular Symposia 188 (2002) 91-103


  159. Stephan, M.; Blankschein, U.; Große, S.; Rudolph, A.
    Den Partikeln auf der Spur - Neuartiger Prozeßsensor für die Extrusion more
    Kunststoffmagazin (2002) 92-93


  160. Nagel, J.; Bräuer, M.; Hupfer, B.; Lehmann, D.
    Verbundhaftung durch grenzflächenreaktives Zweikomponentenspritzgießen more
    Kunststoffverarbeitung Deutschland, Fachkatalog für die Kunststoffindustrie (2002)


  161. Stephan, M.; Stintz, M.; Rudolph, A.; Blankschein, U.; Große, S.
    Partikelanalyse am Extruderausgang : Einfach und genau more
    Plastverarbeiter 53 (2002) 82-83


  162. Jafari, S.H.; Pötschke, P.; Stephan, M.; Warth, H.; Alberts, H.
    Multicomponent blends based on polyamide 6 and styrenic polymers: Morphology and melt rheology more
    Polymer 43 (2002) 6985-6992


  163. Lenk, W.; Meier-Haack, J.
    Polyelectrolyte multilayer membranes for pervaporation separation of aqueous-organic mixtures more
    Desalination 148 (2002) 11-16


  164. Berwald, S.; Meier-Haack, J.
    Handbook of Polyelectrolytes and Their Applications
    Polyelectrolyte Multilayer Systems in Membrane Applications     more
    American Scienctific Publishers 3 (2002) 99-114


  165. Gedan-Smolka, M.
    New Materials : In all weathers - the paint shines more
    Saxon mail und Internetpublikation: (2002) 7


  166. Gedan-Smolka, M.; Lehmann, F.; Lehmann, D.
    Thermisch härtende Pulverlacke machen Fortschritte more
    Holz-Zentralblatt 128 (2002) 886


  167. Gedan-Smolka, M.; Lehmann, F.; Lehmann, D.
    New Catalysts for the Low Temperature Curing of Uretdione Powder Coatings more
    International Journal of Coatings Science (Online-Journal) (2002) www.coatingscience.org


  168. Carroll, T.; Booker, N.A.; Meier-Haack, J.
    Polyelectrolyte-grafted microfiltration membranes to control fouling by natural organic matter in drinking water more
    Journal of Membrane Science 203 (2002) 3-13


  169. Bräuer, M.; Hupfer, B.; Nagel, J.; Lehmann, D.
    Chemical Modification of Polyurethane for Two-Component Injection Molding more
    Polymer Engineering and Science 42 (2002) 859-869


  170. Jafari, S.H.; Pötschke, P.; Stephan, M.; Pompe, G.; Warth, H.; Alberts, H.
    Thermal Behavior and Morphology of Polyamide 6 Based Multicomponent Blends more
    Journal of Applied Polymer Science 84 (2002) 2753-2759


  171. Häußler, L.; Pompe, G.; Lehmann, D.; Lappan, U.
    Fractionated crystallization in blends of functionalized poly(tetrafluoroethylene) and polyamide more
    Macromolecular Symposia 164 (2001) 411-419


  172. Pergushov, D.V.; Oertel, U.; Pilch, B.; Schwarz, S.; Nagel, J.
    Adsorption of Poly(N-ethyl-4-vinyl pyridinium bromide) onto Langmuir-Blodgett Films Built up from Amphiphilic Polymers more
    Macromolecular Symposia 164 (2001) 145-158


  173. Haberstroh, E.; Lettowsky, C.; Nagel, J.
    Chemische Haftung: Grenzflächenreaktives 2-Komponentenspritzgießen more
    Plastverarbeiter 52 (2001) 22-23


  174. Potente, H.; Krawinkel, S.; Bastian, M.; Stephan, M.; Pötschke, P.
    Investigation of the Melting Behavior and Morphology Development of Polymer Blends in the Melting Zone of Twin-Screw Extruders more
    Journal of Applied Polymer Science 82 (2001) 1986-2002


  175. Hupfer, B.; Lehmann, D.; Reinhardt, G.; Lappan, U.; Geißler, U.; Lunkwitz, K.; Kunze, K.
    PTFE Polyamide Compounds : A New Group of Materials = PTFE-Polyamid-Compounds : Eine neue Werkstoffgruppe more
    Kunststoffe / plast europe 91 (2001) 50-52 (englisch), 96-99 (deutsch)


  176. Hupfer, B.; Lehmann, D.; Reinhardt, G.; Lappan, U.; Geißler, U.; Lunkwitz, K.; Kunze, K.
    PTFE-Polyamid-Compounds : Eine neue Werkstoffgruppe more
    Kunststoffe 91 (2001) 96-99


  177. Pearson, C.; Nagel, J.; Petty, M. C.
    Metal ion sensing using ultrathin organic films prepared by the layer-by-layer adsorption technique more
    Journal of Physics / D: Applied Physics 34 (2001) 285-291


  178. Gedan-Smolka, M.; Lehmann, F.; Lehmann, D.
    Pulver bei niedrigeren Temperaturen aushärten - Ein neuer Vernetzungsmechanismus eröffnet neue Anwendungen für thermoreaktive Pulverlacke more
    Metalloberfläche 55 (2001)


  179. Rische, T.; Burkhardt, U.; Stephan, M.; Heidemeyer, P.
    Processing of bimodal polyethylenes on a co - rotating twin screw extruder more
    in: Imaging and Image Analysis Applications for Plastics, Pourdeyhimi, B., ed. (Plastics Design Library 2001) , 53-58


  180. Franzheim, O.; Stephan, M.; Burkhardt, U.; Kiani, A.; Curry, J.; Bätz, H.; Zeuner, A.
    A new on-line technique for morphology analysis and residence time measurement in a twin screw extruder more
    in: Imaging and Image Analysis Applications for Plastics, Pourdeyhimi, B., ed. (Plastics Design Library 2001) , 273-282


  181. Kelnar, I.; Stephan, M.; Jakisch, L.; Janata, M.; Fortelny, I.
    Compatibilization of PA6/PPO Blend with Carboxylated Poly(styrene) Compounds more
    Journal of Applied Polymer Science 80 (2001) S.2273-2280


  182. Meier-Haack, J.; Lenk, W.; Lehmann, D.; Lunkwitz, K.
    Pervaporation separation of water/alcohol mixtures using composite membranes based on polyelectrolyte multilayer assemblies more
    Journal of Membrane Science 184 (2001) 233-243


  183. Lehmann, D.; Hupfer, B.; Lappan, U.; Geißler, U.; Reinhardt, G.; Lunkwitz, K.
    Neue Polytetrafluorethylen-Polyamid Compounds more
    Materialwissenschaft u. Werkstofftechnik 31 (2000) 666-668


  184. Lehmann, F.; Gedan-Smolka, M.; Lehmann, D.
    Katalysierte Pulverhärtung bei niedrigen Temperaturen : Ein neuer Mechanismus für die Vernetzung von Uretdionen und Hydroxypolyestern more
    Farbe und Lack 106 (2000) 62-70


  185. Stephan, M.; Fischer, D.; Zeuner, A.
    EXTRUSION MONITORING - Echtzeitanalyse von Misch-, Reaktions- und Strömungsprozessen im Doppelschneckenextruder; Internationaler Stand und eigene Beiträge more
    in: VDI / VDI-K, 26. Jahrestagung des Fachbeirats Aufbereitungstechnik, 15.11.00-16.11.00 in Baden-Baden (VDI-Verlag 2000) , 59-104


  186. Lehmann, D.; Hupfer, B.; Lappan, U.; Geißler, U.; Reinhardt, G.; Lunkwitz, K.
    Neue Polytetrafluorethylen-Polyamid Compounds more
    Verlag (2000) 666-668


  187. Franke, R.; Lehmann, D.; Kunze, K.
    Neue PTFE-Polyamid-Materialien für verschleißarme, wartungsfreie Gleitlager more
    in: Reibung, Schmierung und Verschleiß : Tagungsband der Tribologie-Fachtagung 2000, 25.-27.09.2000, Göttingen (GfT 2000) , 8/1-8/14


  188. Baryshnikova, E.A.; Sergeeva, T.I.; Oertel, U.; Nagel, J.; Zaitsev, S.Yu.
    Polymer monolayers with photosensitive crown-ether more
    Macromolecular Rapid Communications 21 (2000) 45-47


  189. Kelnar, I.; Stephan, M.; Jakisch, L.; Fortelny, I.
    Influence of the Component Reactivity on the Properties of Ternary Reactive Blends Nylon 6/Rigid Brittle Polymer/Elastomer more
    Journal of Applied Polymer Science 78 (2000) 1597-1603


  190. Meier-Haack, J.; Lehmann, D.; Lunkwitz, K.; Kolz, H.; Mennig, G.
    Polymerwerkstoffe 2000: Halle/Saale, 25. - 27. September 2000
    Oberflächenmodifizierung im Spritzgussverfahren: Eine neue Anwendung für ein etabliertes Verfahren     more
    Martin-Luther-Universität Halle-Wittenberg (2000) 288-291


  191. Petty, M. C.; Pearson, C.; Monkman, A.P.; Casalini, R.; Capaccioli, S.; Nagel, J.
    Application of impedance spectroscopy to the study of organic multilayer devices more
    Colloids and Surfaces / A 171 (2000) 159-166


  192. Meier-Haack, J.; Rieser, Th.; Lenk, W.; Berwald, S.; Lehmann, D.
    Functional materials
    Composite Membranes for Pervaporation Separation Processes Based on Polyelectrolyte Multilayer Assemblies     more
    Wiley-VCH (2000) 347-352


  193. Meier-Haack, J.; Rieser, Th.; Lenk, W.; Berwald, S.; Lehmann, D.
    Functional materials
    Build-up of Polyelectrolyte Multilayer Assemblies: A Useful Tool for Controlled Modification of Microfiltration and Pervaporation Membranes     more
    Wiley-VCH (2000) 316-322


  194. Gedan-Smolka, M.; Häußler, L.; Fischer, D.
    Thermal deblocking of masked low molecular isocyanates, I. Aliphatic isocyanates more
    Thermochimica Acta 351 (2000) 95-105


  195. Meier-Haack, J.; Lenk, W.; Berwald, S.; Rieser, Th.; Lunkwitz, K.
    Influence of thermal treatment on the pervaporation separation properties of polyamide-6 membranes more
    Separation and Purification Technology 19 (2000) 199-207


  196. Lunkwitz, K.; Lappan, U.; Lehmann, D.
    Modification of fluoropolymers by means of electron beam irradiation more
    Radiation Physics and Chemistry 57 (2000) 373-376


  197. Franzheim, O.; Rische, T.; Stephan, M.; MacKnight, W.J.
    Blending of Immiscible Polymers in a Mixing Zone of a Twin Screw Extruder - Effects of Compatibilization more
    Polymer Engineering and Science 40 (2000) 1143-1156


  198. Potente, H.; Bastian, M.; Gehring, A.; Stephan, M.; Pötschke, P.
    Experimental investigations of the morphology development of polyblends in corotating twin screw extruders more
    Journal of Applied Polymer Science 76 (2000) 708-721


  199. Meier-Haack, J.; Berwald, S.; Rieser, Th.
    Auf ein langes Leben : Synthetische Membranen mit verbesserten Eigenschaften mindern Fouling more
    Process 10 (2000) 2-3


  200. Meier-Haack, J.; Rieser, Th.; Lenk, W.; Lehmann, D.; Berwald, S.; Schwarz, S.
    Effect of Polyelectrolyte Complex Layers on the Separation Properties and the Fouling Behavior of Surface and Bulk Modified Membranes more
    Chemical Engineering and Technology 23 (2000) 114-118


  201. Rieser, Th.; Lunkwitz, K.; Berwald, S.; Meier-Haack, J.; Müller, M.; Cassel, F.; Dioszeghy, Z.; Simon, F.
    Surface Modification of Microporous Polypropylene Membranes by Polyelectrolyte Multilayers more
    in: Membranes Formation and Modification, I. Pinnau, B. D. Freeman, ed. (American Chemical Society 2000) , 189-204


  202. Meier-Haack, J.; Rieser, Th.; Berwald, S.; Müller, M.; Lunkwitz, K.
    Mikrofiltrationsmembranen mit reduzierter Foulingneigung durch Modifizierung mit Polyelektrolyten und Polyelektrolytkomplexen more
    Klenkes (2000)


 
Publications
Publikationen

Departments

Reactive Processing

News

8th International Conference on Nanostructured Polymers and Nanocomposites
Mai 24: Prof. Theo Dingemans, High-performance Polyetherimides with 0-D, 1-D and 2-D Carbon Nano Reinforcements.
Mai 31: Prof. Patrick Theato, Reactive and Photo-Cleavable Polymers and Block copolymers for Thin Film Application.
Juni 6: Prof. O. Kuksenok, Designing active polymer gels with biomimetric functionality: from reconfiguration to direct motion and autochemotaxis.
Juni 7: Prof. Klaus Huber, Specific Binding of Cations to Polyacrylates in Dilute Solution – a Combined SAXS and ASAXS Study.
8th Workshop Ellipsometry
6th International Conference on Carbon NanoParticle Based Composites