Abteilungen und Gruppen > Verbundwerkstoffe > Publikationen

Publikationen

  1. Tzounis, L.; Kirsten, M.; Simon, F.; Mäder, E.; Stamm, M.
    The interphase microstructure and electrical properties of glass fibers covalently and non-covalently bonded with multiwall carbon nanotubes mehr
    Carbon 73 (2014) 310-324


  2. Tzounis, L.; Debnath, S.; Rooj, S.; Mäder, E.; Das, A.; Stamm, M.; Heinrich, G.
    High performance natural rubber compositives with a hierarchical reinforcement structure of carbon nanotube modified natural fibers mehr
    Materials and Design 58 (2014) 1-11


  3. Rausch, J.; Mäder, E.
    Carbon nanotube-based interphase sensor for structural health monitoring in continuous glass fiber-reinforced polypropylene mehr
    in: Recent Advances in Adhesion Science and Technology in Honor of Dr. Kash Mittal, Gutowski, W.V.; Dodiuk, H., ed. (CRC Press 2014) 2014, 295-318


  4. Hinüber, C.; Chwalek, K.; Pan-Montojo, F.-J.; Nitschke, M.; Vogel, R.; Brünig, H.; Heinrich, G.; Werner, C.
    Hierarchically structured nerve guidance channels based on poly-3-hydroxybutyrate enhance oriented axonal aotgrowth mehr
    Acta Biomaterialia 10 (2014) 2065-2095


  5. Qi, H.; Liu, J.; Deng, Y.; Gao, S.-L.; Mäder, E.
    Cellulose fibres with carbon nanotube networks for water sensing mehr
    Journal of Materials Chemistry A 2 (2014) 5541-5547


  6. Tran, N. H. A.; Brünig, H.; Hinüber, C.; Heinrich, G.
    Melt spinning of biodegradable nanofibrillary structures from poly(lactic acid) and poly(vinyl alcohol) blends mehr
    Macromolecular Materials and Engineering 299 (2014) Early view


  7. Zhandarov, S.; Mäder, E.
    Analysis of a pull-out test with real specimen geometry. Part II: the effect of meniscus mehr
    Journal of Adhesion Science and Technology 28 (2014) 65-84


  8. Saeb, M. R.; Bakhshandeh, E.; Khonakdar, H. A.; Mäder, E.; Scheffler, C.; Heinrich, G.
    Cure kinetics of epoxy nanocomposites affected by MWCNTs functionalization: A review mehr
    The Scientific World Journal 2013 (2013) Artical ID 703708, 14 pages


  9. Asadinezhad, A.; Khonakdar, H. A.; Scheffler, C.; Wagenknecht, U.; Heinrich, G.
    Poly(ethylene succinate)/single-walled carbon nanotube composites: a study on crystallization mehr
    Polymer Bulletin 70 (2013) 3463-3474


  10. Böhm, S.; Häntzschel, N.; Heinrich, G.; Mäder, E.; Thiede, H.; Wiegand, N.
    Binderdesign und Binderapplikation mehr
    in: Leichtbau mit Textilverstärkung für Serienanwendungen TU Dresden, Cherif, Chokri, ed. (Verlag Wissenschaftliche Scripten 2013) , 27-80


  11. Uhlig, K.; Spickenheuer, A.; Bittrich, L.; Heinrich, G.
    Development of a highly stressed bladed rotor made of CFRP using tailored fiber placement technology mehr
    Mechanics of Composite Materials 49 (2013) 201-210


  12. Qi, H.; Mäder, E.; Liu, J.
    Unique water sensors based on carbon nanotube-cellulose composites mehr
    Sensors and Actuators B: Chemical 185 (2013) 225-230


  13. Qi, H.; Mäder, E.; Liu, J.
    Electrically conductive aerogels composed of cellulose and carbon nanotubes mehr
    Journal of Materials Chemistry A 1 (2013) 9714-9720


  14. Ghelichi, M.; Qazvini, N. T.; Jafari, S.H.; Khonakdar, H. A.; Farajollahi, Y.; Scheffler, C.
    Conformational, thermal, and ionic conductivity behavior of PEO in PEO/PMMA miscible blend: investigating the effect of lithium salt mehr
    Journal of Applied Polymer Science 129 (2013) 1868-1874


  15. Qi, H.; Liu, J.; Gao, S.-L.; Mäder, E.
    Multifunctional films composed of carbon nanotubes and cellulose regenerated from alkaline/urea solution mehr
    Journal of Materials Chemistry A 1 (2013) 2161-2168


  16. Sharma, M.; Bijwe, J.; Mäder, E.; Kunze, K.
    Strengthening of CF/PEEK interface to improve the tribological performance in low amplitude oscillating wear mode mehr
    Wear of Materials 301 (2013) 735-739


  17. Bellmann, C.; Plonka, R.; Caspari, A.; Grundke, K.
    Investigation of competitive adsorption of fibre sizing components: possibilities of electrokinetics mehr
    Composite Interfaces 20 (2013) 279-286


  18. Zhandarov, S.; Mäder, E.
    Analysis of a pull-out test with real specimen geometry. Part I: matrix droplet in the shape of a spherical segment mehr
    Journal of Adhesion Science and Technology 27 (2013) 430-465


  19. Scheffler, C.; Zhandarov, S.; Jenschke, W.; Mäder, E.
    Poly(vinal alcohol) fiber reinforced concrete: investigation of strain rate dependen interphase behavior with single fiber pullout test under quasi-static and high rate loading mehr
    Journal of Adhesion Science and Technology 27 (2013) 385-402


  20. Ma, Peng-Cheng; Liu, J.; Gao, S.-L.; Mäder, E.
    Development of functional glass fibres with nanocomposite coating: A comparative study mehr
    Composites: Part A 44 (2013) 16-22


  21. Fan, Q.; Qin, Z.; Gao, S.-L.; Wu, Y.; Pionteck, J.; Mäder, E.; Zhu, M.
    The use of a carbon nanotube layer on a polyurethane multifilament substrate for monitoring strains as large as 400% mehr
    Carbon 50 (2012) 4085-4092


  22. Doan, T.T.L.; Brodowsky, H.; Mäder, E.
    Jute fibre/epoxy composites: surface properties and interfacial adhesion mehr
    Composites Science and Technology 72 (2012) 1160-1166


  23. Uhlig, K.; Liebernickel, T.; Spickenheuer, A.; Heinrich, G.
    Entwicklung eines hochdrehzahlbeanspruchten Axiallaufrades aus kohlefaserverstärktem Epoxidharz mit einer beanspruchungsgerecht gestalteten Faserstruktur bei Verwendung der Tailored Fibre Placement Technologie mehr
    Technische Universität Chemnitz 13 (2012) 325-332


  24. Bittrich, L.; Spickenheuer, A.; Uhlig, K.; Heinrich, G.
    EPOPunch - ein neues Tool zur Effizienzsteigerung und Optimierung von Stickmustern und Faserverbundteilen mehr
    Technische Universität Chemnitz 13 (2012) 181-185


  25. Spickenheuer, A.; Bittrich, L.; Uhlig, K.; Heinrich, G.
    Makroskopische Modellbildung variabelaxialer und konturierter Versteifungsstrukturen mehr
    Technische Universität Chemnitz 13 (2012) 130-200


  26. Ma, P.-C.; Zheng, Q.-B.; Mäder, E.; Kim, Jang-Kyo
    Behavior of load transfer in functionalized carbon nanotube/epoxy nanocomposites mehr
    Polymer 53 (2012) 6081-6088


  27. Kauffmann-Weiss, S.; Scheerbaum, N.; Liu, J.; Klauss, H. J.; Schultz, L.; Mäder, E.; Häßler, R.; Heinrich, G.; Gutfleisch, O.
    Reversible magnetic field induced strain in Ni2MnGa-polymer-composites mehr
    Advanced Engineering Materials 14 (2012) 20-27


  28. Trey, S. M.; Gamstedt, K.; Mäder, E.; Jönsson, S.; Johansson, M.
    Glass fiber reinforced high glass transition temperature thiol-ene networks mehr
    Composites / Part A 42 (2011) 1800-1808


  29. Zhang, J.; Liu, J.; Zhuang, R.-C.; Mäder, E.; Heinrich, G.; Gao, S.-L.
    Single MWNT-glass fiber as strain sensor and switch mehr
    Advanced Materials 23 (2011) 3392-3397


  30. Ma, Peng-Cheng; Siddiqui, N. A.; Mäder, E.; Kim, Jang-Kyo
    Correlation between electrokinetic potential, dispersibility, surface chemistry and energy of carbon nanotubes mehr
    Composites Science and Technology (2011) 1644-1651


  31. Zhuang, R.-C.; Liu, J.; Plonka, R.; Huang, Y.-X.; Mäder, E.
    NaBF4 as a hygrothermal durability enhancer for glass fibre reinforced polypropylene composites mehr
    Composites Science and Technology 71 (2011) 1461-1470


  32. Rausch, J.; Mäder, E.
    Carbon nanotube coated glass fibres for interphase health monitoring in textile composites mehr
    Materials Technology 26 (2011) 153-158


  33. Zhuang, R.-C.; Doan, T.T.L.; Liu, J.; Zhang, J.; Gao, S.-L.; Mäder, E.
    Multi-functional multi-walled carbon nanotube-jute fibres and composites mehr
    Carbon 49 (2011) 2683-2692


  34. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Heinrich, G.; Werner, C.
    Hollow fibers made from a poly(3-hydroxybutyrate)/poly-e-caprolactone blend mehr
    eXPRESS Polymer Letters 5 (2011) 643-652


  35. Gao, S.-L.; Mäder, E.
    Nano reinforcements in surface coatings and composite interphases mehr
    in: Advances in Nanocomposites, Boreddy Reddy, ed. (InTech 2011) , 837-854


  36. Mechtcherine, V.; de Andrade Silva, F.; Butler, M.; Zhu, Deju; Mobasher, B.; Gao, S.-L.; Mäder, E.
    Behaviour of strain-hardening cement-based composites under high strain rates mehr
    Journal of Advanced Concrete Technology 9 (2011) 51-62


  37. Rudzinski, S.; Häußler, L.; Harnisch, C.; Mäder, E.; Heinrich, G.
    Glass fibre reinforced polyamide composites: Thermal behaviour of sizings mehr
    Composites / Part A 42 (2011) 157-164


  38. Hufenbach, W.; Böhm, R.; Thieme, M.; Winkler, A.; Mäder, E.; Rausch, J.; Schade, M.
    Polypropylene/glass fibre 3D-textile reinforced composites for automotive applications mehr
    Materials and Design 32 (2011) 1468-1476


  39. Rausch, J.; Zhuang, R.-C.; Mäder, E.
    Systematically varied interfaces of continuously reinforced glass fibre/polypropylene composites: Comparative evaluation of relevant interfacial aspects mehr
    eXPRESS Polymer Letters 4 (2010) 576-588


  40. Zhuang, R.-C.; Burghardt, T.; Plonka, R.; Liu, J.; Mäder, E.
    Affecting glass fibre surfaces and composite properties by two stage sizing application mehr
    eXPRESS Polymer Letters 4 (2010) 798-808


  41. Rausch, J.; Mäder, E.
    Health monitoring in continuous glass fibre reinforced thermoplastics: Tailored sensitivity and cyclic loading of CNT-based interphase sensors mehr
    Composites Science and Technology 70 (2010) 2023-2030


  42. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Werner, C.
    Hollow poly(3-hydroxybutyrate) fibers produced by melt spinning mehr
    Macromolecular Materials and Engineering 295 (2010) 585-594


  43. Brodowsky, H.; Jenschke, W.; Mäder, E.
    Characterization of interphase properties: Microfatigue of single fibre model composites mehr
    Composites / Part A 41 (2010) 1579-1586


  44. Rausch, J.; Mäder, E.
    Health monitoring in continuous glass fibre reinforced thermoplastics: Manufacturing and application of interphase sensors based on carbon nanotubes mehr
    Composites Science and Technology 70 (2010) 1058-1596


  45. Uhlig, K.; Spickenheuer, A.; Gliesche, K.; Karb, I.
    Strength of CFRP open hole laminates made from NCF, TFP and braided preforms under cyclic tensile loading mehr
    Plastics, Rubber and Composites 39 (2010) 247-255


  46. Rausch, J.; Zhuang, R.-C.; Mäder, E.
    Surfactant assisted dispersion of functionalized multi-walled carbon nanotubes in aqueous media mehr
    Composites / Part A 41 (2010) 1038-1046


  47. Gao, S.-L.; Zhuang, R.-C.; Zhang, J.; Liu, J.; Mäder, E.
    Glass fibre with carbon nanotube networks as Multifunctional sensors mehr
    Advanced Functional Materials 20 (2010) 1885-1893


  48. Zhuang, R.-C.; Burghardt, T.; Mäder, E.
    Study on interfacial adhesion strength of single glass fibre/polypropylene model composites by altering the nature of the surface of sized glass fibres mehr
    Composites Science and Technology 70 (2010) 1523-1529


  49. Mäder, E.
    Grenzschichtsensor zur Strukturüberwachung von faserverstärkten Verbundwerkstoffen mehr
    Dresdner Transferbrief 1.10 (2010) 17


  50. Zhang, J.; Zhuang, R.-C.; Liu, J.; Mäder, E.; Heinrich, G.; Gao, S.-L.
    Functional interphases with multi-walled carbon nanotubes in glass fibre/epoxy composites mehr
    Carbon 48 (2010) 2273-2281


  51. Rausch, J.; Zhuang, R.-C.; Mäder, E.
    Surfactant assisted processing of carbon nanotube/polypropylene composites: Impact of surfactants on the matrix polymer mehr
    Journal of Applied Polymer Science 117 (2010) 2583-2590


  52. Siddiqui, N. A.; Li, E. L.; Sham, M.-L.; Tang, B. Z.; Gao, S.-L.; Mäder, E.; Kim, J.-K.
    Tensile strength of glass fibres with carbon nanotube-epoxy nanocomposite coating: Effects of CNT morphology and dispersion state mehr
    Composites / Part A 41 (2010) 539-548


  53. Krucinska, I.; Gliscinska, E.; Mäder, E.; Häßler, R.
    Evaluation on the influence of glass fibre distribution in polyamide matrix during the consolidation process on the mechanical properties of GF/PA6 composites mehr
    Fibres & Textiles in Eastern Europe 17 (2009) 81-86


  54. Heinrich, G.; Breier, A.; Hinüber, C.
    Bioabbaubare Polymere in textiler Form für die regenerative Medizin mehr
    Dresdner Transferbrief 17 (2009) 12


  55. Scheffler, C.; Förster, T.; Mäder, E.; Heinrich, G.; Hempel, S.; Mechtcheringe, V.
    Aging of alkali-resistant glass and basalt fibers in alkaline solutions: Evaluation of the failure stress by weibull distribution function mehr
    Journal of Non-Crystalline Solids 355 (2009) 2588-2595


  56. Zhao, N. P.; Rödel, H.; Herzberg, C.; Gao, S.-L.; Krzywinski, S.
    Stitched glass/PP composite. Part I: Tensile and impact properties mehr
    Composites / Part A 40 (2009) 635-643


  57. Rausch, J.; Zhuang, R.-C.; Mäder, E.
    Application of nanomaterials in sizings for glass fibre/polypropylene hybrid yarn spinning mehr
    Materials Technology 24 (2009) 29-35


  58. Bahners, T.; Häßler, R.; Gao, S.-L.; Mäder, E.; Wego, A.; Schollmeyer, E.
    Photochemical surface modification of PP for abrasion resistance mehr
    Applied Surface Science 255 (2009) 9139-9145


  59. Cherif, C.; Rödel, H.; Hoffmann, G.; Diestel, O.; Herzberg, C.; Paul, C.; Schulz, C.; Großmann, K.; Mühl, A.; Mäder, E.; Brünig, H.
    Textile Technologien für hybridgarnbasierte komplexe Preformstrukturen mehr
    Zeitschrift Kunststofftechnik : Journal of plastics technology / Wissenschaftlicher Arbeitskreis der Universitäts-Professoren der Kunststofftechnik 6 (2009) 103-129


  60. Scheffler, C.; Gao, S.-L.; Plonka, R.; Mäder, E.; Hempel, S.; Butler, M.
    Interphase modification of alkali-resistant glass fibres and carbon fibres for textile reinforced concrete II: Water adsorption and composite interphases mehr
    Composites Science and Technology 69 (2009) 905-912


  61. Scheffler, C.; Gao, S.-L.; Plonka, R.; Mäder, E.; Hempel, S.; Butler, M.; Mechtcheringe, V.
    Interphase modification of alkali-resistant glass fibres and carbon fibres for textile reinforced concrete I: Fibre properties and durability mehr
    Composites Science and Technology 69 (2009) 531-538


  62. Brodowsky, H.; Jenschke, W.; Mäder, E.
    Characterization of interphase properties by frequency-dependent cyclic loading of single fibre model composites mehr
    Journal of Adhesion Science and Technology 24 (2009) 237-253


  63. Hasan, M. M. B.; Dutschk, V.; Brünig, H.; Mäder, E.; Häußler, L.; Häßler, R.; Cherif, C.; Heinrich, G.
    Comparison of tensile, thermal, anf thermo-mechanical properties of polyester filaments having different cross-sectional shape mehr
    Journal of Applied Polymer Science 111 (2008) 805-812


  64. Spickenheuer, A.; Schulz, M.; Gliesche, K.; Heinrich, G.
    Using tailored fibre placement technology for stress adapted design of composite structures mehr
    Plastics, Rubber and Composites : Macromolecular Engineering 37 (2008) 227-232


  65. Mäder, E.; Rausch, J.; Schmidt, N.
    Commingled yarns - Processing aspects and tailored surfaces for polypropylene/glass composites mehr
    Composites / Part A 39 (2008) 612-623


  66. Gao, S.-L.; Mäder, E.; Plonka, R.
    Nanocomposite coatings for healing surface defects of glass fibers and improving interfacial adhesion mehr
    Composites Science and Technology 68 (2008) 2892-2901


  67. Mäder, E.; Melcher, S.
    Adhesion of PBO fiber in epoxy composites mehr
    Journal of Donghua University 24 (2007) 173-177


  68. Mäder, E.; Melcher, S.; Liu, J.; Gao, S.-L.; Bianchi, A. D.; Zherlitsyn, S.; Wosnitza, J.
    Adhesion of PBP fiber in epoxy composites mehr
    Journal of Materials Science 42 (2007) 8047-8052


  69. Mäder, E.; Gao, S.-L.; Plonka, R.; Wang, J.
    Investigation on Adhesion, Interphases, and Failure Behaviour of CBTÒ/ Glass Fiber Composites mehr
    Composites Science and Technology 67 (2007) 3140-3150


  70. Mäder, E.; Rothe, C.; Gao, S.-L.
    Commingled yarns of surface nanostructured glass and polypropylene filaments for effective composite properties mehr
    Journal of Materials Science 42 (2007) 8062-8070


  71. de Lange, P. J.; Akker, P.G.; Mäder, E.; Gao, S.-L.; Prasithphol, W.; Young, R. J.
    Controlled interfacial adhesion of twaron aramid fibres in composites by the finish formulation mehr
    Composites Science and Technology 67 (2007) 2027-2035


  72. Bahners, T.; Opwis, K.; Schollmeyer, E.; Gao, S.-L.; Mäder, E.
    Atomic force microscopy based studies of photochemically-modified poly(ethylene terephthalate) surfaces mehr
    in: Polymer Surface Modification: Relevance to Adhesion, Volume 4, K.L. Mittal, ed. (VSP 2007) 4, 127-138


  73. Bellmann, C.; Plonka, R.; Caspari, A.; Luxbacher, T.
    Characterization of the interaction between silanes and solid surfaces by the streaming potential method mehr
    in: Silanes and Other Coupling Agents : Volume 4, K.L. Mittal, ed. (VSP 2007) 4, 39-47


  74. Melcher, S.; Mäder, E.; Gittel, D.; Urban, H.; Kaiser, M.
    Fasermodifizierung für PA 6-Verbunde hergestellt durch anionische Polymerisation / Fibre surface modification for PA 6 composites made by anionic polymerization mehr
    Technische Textilien/Technical Textiles 50 (2007) 28-31 / E28-E30


  75. Golzar, M.; Brünig, H.; Mäder, E.
    Commingled hybrid yarn diameter ratio in continuous fiber-reinforced thermoplastic composites mehr
    Journal of Thermoplastic Composite Materials 20 (2007) 17-26


  76. Doan, T.T.L.; Brodowsky, H.; Mäder, E.
    Jute fibre / polypropylene composites. II. Thermal, hydrothermal and dynamic mechanical behaviour mehr
    Composites Science and Technology 67 (2007) 2707-2714


  77. Gao, S.-L.; Mäder, E.; Plonka, R.
    Surface Defects Repairing by Polymer Coating with Low Fraction of Nano-reinforcements mehr
    Key Engineering Materials 334-335 (2007) 757-760


  78. Liu, J.; Gao, S.-L.; Mäder, E.; Bianchi, A. D.; Herrmannsdoerfer, T.; Zherlitsyn, S.; Zvyagin, S. A.; Wosnitza, J.
    Adhesion Issues in PBO/Epoxy Composites mehr
    Key Engineering Materials 334-335 (2007) 233-236


  79. Mäder, E.; Rothe, C.; Brünig, H.; Leopold, T.
    Online spinning of commingled yarns - equipment and yarn modification by tailored fibre surfaces mehr
    Key Engineering Materials 334-335 (2007) 229-232


  80. Gao, S.-L.; Mäder, E.; Plonka, R.
    Nanostructured coatings of glass fibers: Improvement of alkali reistance and mechanical properties mehr
    Acta Materialia 55 (2007) 1043-1052


  81. Mäder, E.; Gao, S.-L.; Plonka, R.
    Static and dynamic properties of single and multi-fiber/epoxy composites modified by sizings mehr
    Composites Science and Technology 67 (2007) 1105-1115


  82. Zhandarov, S.; Mäder, E.
    Increase in the molecular component of the adhesive pressure in polymer composites induced by electric charge mehr
    Composite Interfaces 13 (2006) 865-897


  83. Mäder, E.; Rothe, C.
    Tailoring of commingled yarns for effective composite properties mehr
    Chemical Fibers International 56 (2006) 298-300


  84. Mäder, E.; Rothe, C.
    Maßschneidern von Hybridgarnen für effektive Verbundeigenschaften / Tailoring of commingled yarns for effective composite properties mehr
    Technische Textilien/Technical Textiles 49 (2006) 155-158 / E114-E116


  85. Zhandarov, S.; Gorbatkina, Yu.A.; Mäder, E.
    Adhesional pressure as a criterion for interfacial failure in fibrous microcomposites and its determination using a microbond test. mehr
    Composite Science and Technology 66 (2006) 2610-2628


  86. Doan, T.T.L.; Gao, S.-L.; Mäder, E.
    Jute/polypropylene composites. I. Effect of matrix modification mehr
    Composites Science and Technology 66 (2006) 952-963


  87. Gast, F.-U.; Dittrich, P.S.; Schwille, P.; Weigel, M.; Mertig, M.; Opitz, J.; Queitsch, U.; Diez, S.; Lincoln, B.; Wottawah, J.; Schinkinger, S.; Guck, J.; Käs, J.; Smolinski, J.; Salchert, K.; Werner, C.; Duschl, C.; Jäger, M.S.; Uhlig, K.; Geggier, P.; Howitz, S.
    The microscopy cell (MicCell), a versatile modular flowthrough system for cell biology, biomaterial research, and nanotechnology mehr
    Microfluidics and Nanofluodics 2 (2006) 21-36


  88. Ehrentraut, W.; Plonka, R.; Mäder, E.; Gao, S.-L.
    Pilotno postrojenje za ispredanje staklenih vlakana postojanih na alkalije mehr
    Tekstil 54 (2005) 286-289


  89. Zhandarov, S.; Pisanova, E.; Mäder, E.
    Is there any contradiction between the stress and energy failure criteria in micromechanical tests? Pt. III. Experimental observation of crack propagation in the microbond test mehr
    Journal of Adhesion Science and Technology 19 (2005) 679-704


  90. Zhandarov, S.; Mäder, E.
    Peak force as function of the embredded length in pull-out and microbond tests: effect of specimen geometry mehr
    Journal of Adhesion Science and Technology 19 (2005) 817-856


  91. Gao, S.-L.; Häßler, R.; Mäder, E.; Bahners, T.; Opwis, K.; Schollmeyer, E.
    Photochemical surface modification of PET by excimer UV lamp irradiation mehr
    Applied Physics / B 81 (2005) 681-690


  92. Bellmann, C.; Caspari, A.; Albrecht, V.; Doan, T.T.L.; Mäder, E.; Luxbacher, T.; Kohl, R.
    Electrokinetic properties of natural fibres mehr
    Colloids and Surfaces A: Physicochemical and Engineering Aspects 267 (2005) 19-23


  93. Mäder, E.
    Hybridgarne für hoch beanspruchte Leichtbauteile mehr
    Konstruktion 57 (2005)


  94. Hufnagel, E.; Mäder, E.; Keusch, S.; Arnold, R.
    Einsatz von "heavy tows" für bi- und multiaxiale Gewirke zur Kunststoffverstärkung = Heavy tows used with biaxial and multiaxial knits to reinforce plastic materials mehr
    Technische Textilien/Technical Textiles 48 (2005) 119-123, E103-E107


  95. Plonka, R.; Rothe, C.; Mäder, E.
    Beschichtete alkaliresistente Glasfäden und Hybridgarne als Bewehrung in Beton = Coated Alkali-resistant Glass Fibres and Hybrid Yarns for Textile Reinforced Concrete mehr
    Technische Textilien/Technical Textiles 48 (2005) 150-152, E122-124


  96. Rothe, C.; Mrozik, B.; Hoffmann, G.; Offermann, P.
    Einfluss des Klebstoffs auf die Haftkraft von Flockfasern = Investigation of the influence of adhesives on the bonding strength of flock fibers mehr
    Technische Textilien/Technical Textiles 48 (2005) 111-113, E98-E99


  97. Ehrentraut, W.; Plonka, R.; Mäder, E.; Gao, S.-L.
    Pilotanlage zum Erspinnen alkaliresistenter Glasfasern = Pilot equipment for continuous spinning of alkaline resistant glass fibers mehr
    Technische Textilien/Technical Textiles 48 (2005) 22-24, E23-E25


  98. Ogawa, A.; Winkler, A. R.; Oono, T.; Okabe, H.; Ooyagi, T.; Akiba, N.; Ogawa, K.; Oono, W.; Sinya, S.; Washizu, M.
    Fluid Dynamical Characteristics of Pressure Drop of Air Flow in Two Kinds of Cylindrical Vortex Chambers for Control of Vortex Flow mehr
    Journal of the College of Engineering Nihon University 46 (2005) 19-36


  99. Plonka, R.; Mäder, E.; Rothe, C.; Köckritz, U.; Waldmann, M.; Klug, P.
    Effective Reinforcement of Concrete by On-line Polymer Coating = Effiziente textile Bewehrungen für Beton durch Online-Polymerbeschichtung mehr
    Technische Textilien/Technical Textiles 48 (2005) 205-207, E161-E163


  100. Zhandarov, S.; Mäder, E.
    Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters mehr
    Composite Science and Technology 65 (2005) 149-160


  101. Brantseva, T.V.; Gorbatkina, Yu.A.; Mäder, E.; Dutschk, V.; Kerber, M.L.
    Modification of epoxy resin by polysulfone to improve the interfacial and mechanical properties in glass fibre composites. II. adhesion of the epoxy-polysulfone matrices to glass fibres mehr
    Journal of Adhesion Science and Technology 18 (2004) 1293-1308


  102. Zhandarov, S.; Mäder, E.
    Determination of interfacial parameters in fiber-polymer systems from a pull-out test data using a bilinear bond law mehr
    Composite Interfaces 11 (2004) 361-391


  103. Mäder, E.
    Reduced weight fibre-reinforced polymers mehr
    CORDIS Focus RTD Results Supplement 47 (2004) 39


  104. Gao, S.-L.; Mäder, E.; Plonka, R.
    Coatings for glass fiber in a cementitious matrix mehr
    Acta Materialia 52 (2004) 4745-4755


  105. Schorn, H.; Raupach, M.; Brameshuber, W.; Höcker, H.; Mäder, E.; Arnold, B.J.A.; Brockmann, T.; Hempel, R.; Orlowsky, J.; Plonka, R.
    Betontechnologie und Dauerhaftigkeit von glasfaserbewehrten Bauteilen mehr
    Beton- und Stahlbetonbau 99 (2004) 444-451


  106. Mäder, E.; Gao, S.-L.; Plonka, R.
    Enhancing the Properties of Composites by Controlling Their Interphase Parameters mehr
    Advanced Engineering Materials 6 (2004) 147-150


  107. Plonka, R.; Mäder, E.; Gao, S.-L.; Bellmann, C.; Dutschk, V.; Zhandarov, S.
    Adhesion in epoxy/glass fibre composites influenced by aging effects on sizings mehr
    Composites / Part A 35 (2004) 1207-1216


  108. Mäder, E.; Plonka, R.; Schiekel, M.; Hempel, R.
    Coatings on alkali-resistant Glass Fibres for the Improvement of Concrete mehr
    Journal of Industrial Textiles 33 (2004) 191-207


  109. Gao, S.-L.; Mäder, E.; Zhandarov, S.
    Carbon fibres and composites with epoxy resins: Topography, fractography and interphases mehr
    Carbon 42 (2004) 515-529


  110. Gao, S.-L.; Mäder, E.; Abdkader, A.; Offermann, P.
    Environmental resistance and mechanical performance of alkali-resistant glass fibers with surface sizings mehr
    Journal of Non-Crystalline Solids 325 (2003) 230-241


  111. Zhandarov, S.; Mäder, E.
    Indirect estimation of fiber/polymer bond strength and interfacial friction from maximum load values recorded in the microbond and pull-out tests. Part II: Critical energy release rate mehr
    Journal of Adhesion Science and Technology 17 (2003) 967-980


  112. Bellmann, C.; Plonka, R.; Synytska, A.; Caspari, A.; Schinner, R.; Grundke, K.
    Verbundwerkstoffe
    Untersuchung der Wechselwirkungskräfte in glasfaserverstärkten Polymerverbunden
    mehr
    Wiley-VCH (2003) 476-482


  113. Zhandarov, S.; Mäder, E.
    Some reflections on 'self-consistent' approach to the calculation of acid-base parameters of solids and liquids from wetting data mehr
    Composite Interfaces 10 (2003) 41-59


  114. Mäder, E.; Gao, S.-L.; Plonka, R.
    Verbundwerkstoffe
    Verbundwerkstoffe mit höheren Gebrauchseigenschaften durch Steuerung der Grenzschichtparameter
    mehr
    Wiley-VCH (2003) 483-488


  115. Talaie, A.; Lee, Y.K.; Jang, J.; Choo, D.J.; Park, S.M.; Lee, J.Y.; Park , S.H.; Huh, G.; Taguchi, T.; Mäder, E.
    Smart Polymers, Copolymers and Composites with Light Emission Ability: Millennium Products for Intelligent Displays for Navigation in the Transportation Industry mehr
    International Journal of Materials & Product Technology 19 (2003) 304-313


  116. Talaie, A.; Lee, Y.K.; Jang, J.; Choo, D.J.; Park, S.M.; Lee, J.Y.; Park , S.H.; Huh, G.; Taguchi, T.; Mäder, E.
    Composite based polymeric displays: an introduction to a new smart engineering approach to incorporate transition metals to the polymer matrix mehr
    International Journal of Materials & Product Technology 19 (2003) 314-323


  117. Gao, S.-L.; Mäder, E.; Abdkader, A.; Offermann, P.
    Sizings on Alkali-Resistant Glass Fibers: Environmental Effects on Mechanical Properties mehr
    Langmuir 19 (2003) 2496-2506


  118. Nygard, P.; Grundke, K.; Mäder, E.; Bellmann, C.
    Wetting kinetics and adhesion strength between polypropylene melt and glass fibre: influence of chemical reactivity and fibre roughness mehr
    Journal of Adhesion Science and Technology 16 (2002) 1781-1808


  119. Mäder, E.; Zhou, X.-F.; Zhandarov, S.; Nutt, S.R.; Gao, S.-L.
    Bond Strength Measurement between Glass Fibres and Epoxy Resin at Elevated Temperatures Using the Pull-Out and Push-Out Techniques mehr
    Journal of Adhesion 78 (2002) 547-570


  120. Zhandarov, S.; Mäder, E.; Yurkevich, O.R.
    Indirect estimation of polymer/fiber bond strength and interfacial friction from maximum load values recorded in the microbond and pull-out tests. Part I: Local bond strength mehr
    Journal of Adhesion Science and Technology 16 (2002) 1171-1200


  121. Gao, S.-L.; Mäder, E.
    Characterisation of interphase nanoscale property variations in glass fibre reinforced polypropylene and epoxy resin composites mehr
    Composites / Part A 33 (2002) 559-576


  122. Offermann, P.; Diestel, O.; Choi, B.-D.; Mäder, E.; Hübner, T.
    Weiterentwicklung von Comingling-Hybridgarnen für thermoplastische Faserverbundwerkstoffe = Advancement of comingling hybrid yarns for thermoplastic fiber reinforced composites mehr
    Technische Textilien/Technical Textiles 45 (2002) 16-18, E12-E14


  123. Zinck, P.; Mäder, E.; Gerard, J.F.
    Role of Silane Coupling Agent and Polymeric Film Former for Tailoring Glass Fiber Sizings from Tensile Strength Measurements mehr
    Journal of Materials Science 36 (2001) 5245-ff.


  124. Offermann, P.; Diestel, O.; Choi, B.-D.; Mäder, E.; Hübner, T.
    Optimierung des Commingling-Prozesses zur Herstellung von Hybridgarnen für langfaserverstärkte Thermoplaste (AiF-Projekt Nr. 11644 B) mehr
    ITB-Mitteilungen : Institut für Textil- und Bekleidungstechnik (2001)


  125. Fu, S.-Y.; Lauke, B.; Mäder, E.; Yue, C. Y.; Hu, X.; Mai, Y.W.
    Hybrid effects on tensile properties of hybrid short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites mehr
    Journal of Materials Science 36 (2001) 1243-1251


  126. Pisanova, E.; Zhandarov, S.; Mäder, E.; Young, R. J.; Ahmad, I.
    Three techniques of interfacial bond strength estimation from direct observation of crack initiation and propagation in polymer-fibre systems mehr
    Composites / Part A 32 (2001) 435-443


  127. Pisanova, E.; Zhandarov, S.; Mäder, E.
    How can adhesion be determined from micromechanical tests? mehr
    Composites / Part A 32 (2001) 425-434


  128. de Lange, P. J.; Mäder, E.; Mai, K.; Young, R. J.; Ahmad, I.
    Characterization and micromechanical testing of the interphase of aramid-reinforced epoxy composites mehr
    Composites / Part A 32 (2001) 331-342


  129. Mäder, E.; Gao, S.-L.
    Prospect of nanoscale interphase evaluation to predict composite properties mehr
    Journal of Adhesion Science and Technology 15 (2001) 1015-1037


  130. Talaie, A.; Lee, J.Y.; Lee, Y.K.; Adachi, K.; Taguchi, T.; Mäder, E.; Jang, J.; Romagnoli, J.A.
    Dynamic modeling of a polymeric composite interface: An introduction to in-situ neurocomputing in composite-based PH sensors mehr
    Composite Interfaces 8 (2001) 127-134


  131. Dutschk, V.; Mäder, E.; Rudoy, V.
    Determination of polarity parameters for glass fibres by inverse gas chromatography: Some results and remarks mehr
    Journal of Adhesion Science and Technology 15 (2001) 1373-1389


  132. Häßler, R.; Mäder, E.
    Verbundwerkstoffe und Werkstoffverbunde
    Mikrothermische Charakterisierung von Grenzschichten
    mehr
    Wiley-VCH (2001) 37-43


  133. Mäder, E.; Moos, E.; Karger-Kocsis, J.
    Role of film formers in glass fibre reinforced polypropylene - new insights and relation to mechanical properties mehr
    Composites / Part A 32 (2001) 631-639


  134. Zhandarov, S.; Pisanova, E.; Mäder, E.; Nairn, J.A.
    Investigation of load transfer between the fiber and the matrix in pull-out tests with fibers having different diameters mehr
    Journal of Adhesion Science and Technology 15 (2001) 205-222


  135. Mäder, E.; Pisanova, E.
    Interfacial design in fiber reinforced polymers mehr
    Macromolecular Symposia 163 (2001) 189-212


  136. Bogoeva-Gaceva, G.; Janevski, A.; Mäder, E.
    Nucleation activity of glass fibers towards iPP evaluated by DSC and polarizing light microscopy mehr
    Polymer 42 (2001) 4409-4416


  137. Mäder, E.
    Interphase Characterisation and Study of Structure-Property Relations of Fibre-Reinforced Polymers (BETN 96 0507) mehr
    Newsletter TRA Polymer Materials (2000)


  138. Talaie, A.; Lee, Y.K.; Jang, J.; Choo, D.J.; Kim, K.M.; Park , S.H.; Huh, G.; Lee, J.Y.; Taguchi, T.; Mäder, E.; Esmaili, N.
    Investigation on painting polymer with light emission ability on a substrate and three means to enhance the light emission to fabricate new display devices mehr
    Iranian Polymer Journal 9 (2000) 169-175


  139. van Ooij, W. J.; Luo, S.; Mäder, E.; Mai, K.
    Improved rubber adhesion to textile tire cords by deposition of plasma-polymerized films mehr
    in: Polymer Surface Modification: Relevance to Adhesion, Volume 2, K.L. Mittal, ed. (VSP 2000) 2, 225-241


  140. Pisanova, E.; Dutschk, V.; Zhandarov, S.; Mäder, E.
    "Fundamental" and "practical" adhesion in polymer-fiber systems mehr
    in: Polymer Surface Modification: Relevance to Adhesion, Volume 2, K.L. Mittal, ed. (VSP 2000) 2, 479-503


  141. Zhandarov, S.; Pisanova, E.; Mäder, E.
    Is there any contradiction between the stress and energy failure criteria in micromechanical tests? Pt. II. Crack propagation: Effect of friction on force-displacement curves mehr
    Composite Interfaces 7 (2000) 149-175


  142. Mäder, E.; Mai, K.; Pisanova, E.
    Interphase characterization on polymer composites - monitoring of interphasial behavior in dependence on the mode of loading mehr
    Composite Interfaces 7 (2000) 133-147


  143. Bogoeva-Gaceva, G.; Mäder, E.; Queck, H.
    Properties of Glass Fiber Polypropylene Composites Produced from Split-Warp-Knit Textile Preforms mehr
    Journal of Thermoplastic Composite Materials 13 (2000) 363-377


  144. Pompe, G.; Mäder, E.
    Experimental detection of a transcrystalline interphase in glass fibre/polypropylene composites mehr
    Composite Science and Technology 60 (2000) 2159-2167


  145. Fu, S.-Y.; Lauke, B.; Mäder, E.; Yue, C. Y.; Fu, S.-Y.
    Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites mehr
    Composites / Part A 31 (2000) 1117-1125


  146. Mäder, E.; Pisanova, E.
    Characterization and Design of Interphases in Glass Fiber Reinforced Polypropylene mehr
    Polymer Composites 21 (2000) 361-368


  147. Bogoeva-Gaceva, G.; Mangovska, B.; Mäder, E.
    Crystallization Kinetics of Maleic Anhydride-Modified iPP Studied by POM mehr
    Journal of Applied Polymer Science 77 (2000) 3107-3118


  148. Mäder, E.; Zhou, X.-F.; Pisanova, E.; Zhandarov, S.; Nutt, S.R.
    Characterization of the interfacial bond strength between glass fibre and epoxy resin using the pull-out and push-out techniques mehr
    Advanced Composites Letters 9 (2000) 2203-2209


  149. Mäder, E.; Gao, S.-L.; Kim, J.-K.
    Interface Controlled Materials
    New Nano-Scale Characterization Techniques for Interphases
    mehr
    Wiley-VCH (2000) 237-242


  150. Luo, S.; van Ooij, W. J.; Mäder, E.; Mai, K.
    Surface modification of textile tire cords by plasma polymerization for improvement of rubber adhesion mehr
    Rubber Chemistry and Technology 73 (2000) 121-137


  151. Talaie, A.; Lee, J.Y.; Lee, Y.K.; Jang, J.; Romagnoli, J.A.; Taguchi, T.; Mäder, E.
    Dynamic sensing using intelligent composite: an investigation to development of new pH sensors and electrochromic devices mehr
    Thin Solid Films 363 (2000) 163 - 166


  152. Pisanova, E.; Mäder, E.
    Acid-base interactions and covalent bonding at a fiber-matrix interface: contribution to the work of adhesion and measured adhesion strength mehr
    Journal of Adhesion Science and Technology 14 (2000) 415-436


  153. Bogoeva-Gaceva, G.; Janevski, A.; Mäder, E.
    Characterization of a maleic anhydride-modified polypropylene as an adhesion promoter for glass fiber composites mehr
    Journal of Adhesion Science and Technology 14 (2000) 363-380


  154. Jacobasch, H.-J.; Grundke, K.; Mäder, E.; Freitag, K.-H.; Panzer, U.
    Application of the surface free energy concept in polymer processing mehr
    Journal of Adhesion Science and Technology 6 (1992) 1381-1396


  155. Salehi, S.; Bahners, T.; Gutmann, J.S.; Gao, S.-L.; Mäder, E.; Fuchsluger, T.A.
    Characterization of structural, mechanical and nano-mechanical properties of electrospun PGS/PCL fibers mehr
    RSC Advances 4 (1970) 16951-16957


 
Publications
Publikationen

Abteilungen und Gruppen

Verbundwerkstoffe

News