Departments > Composite Materials > Publications

Publications

  1. Saeb, M. R.; Najafi, F.; Bakhshandeh, E.; Khonakdar, H. A.; Mostafaiyan, M.; Simon, F.; Scheffler, C.; Mäder, E.
    Highly curable epoxy/MWCNTs nanocomposites: An effective approach to functionalization of carbon nanotubes more
    Chemical Engineering Journal 259 (2015) 117-125


  2. Zhang, J.; Zhuang, R.-C.; Liu, J.; Scheffler, C.; Mäder, E.; Heinrich, G.; Gao, S.-L.
    A single glass fiber with ultrathin layer of carbon nanotube networks beneficial to in-situ monitoring of polymer properties in composite interphases more
    Soft Materials 12 (2014) S115-120


  3. Förster, T.; Scheffler, C.; Mäder, E.; Heinrich, G.; Jesson, D. A.; Watts, J.F.
    Dissolution behaviour of model basalt fibres studied by surface analysis methods more
    Applied Surface Science 322 (2014) 78-84


  4. Qi, H.; Liu, J.; Mäder, E.
    Smart cellulose fibers coated with carbon nanotube networks more
    Fibers 2 (2014) 295-307


  5. Gredes, T.; Gedrange, T.; Hinüber, C.; Gelinsky, M.; Kunert-Keil, C.
    Histological and molecular-biological analyses of poly(3-hydroxybutyrate)(PHB) patches for enhancement of bone regeneration more
    Annals of Anatomy - Anatomischer Anzeiger 196 (2014) In press


  6. Chen, L.; Yang, S.; Mäder, E.; Ma, P.-C.
    Controlled synthesis of hierarchical TiO2 nanoparticles on glass fibres and their photocatalytic performance more
    Dalton Transactions 43 (2014) 12743-12753


  7. Sharma, M.; Gao, S.-L.; Mäder, E.; Bijwe, J.
    Carbon fiber surfaces and composite interphases more
    Composites Science and Technology 102 (2014) 35-50


  8. Malanin, M.; Plonka, R.; Mäder, E.
    Glass cord with improved mechanical properties, adhesion strength and environmental durability more
    Chemical Fibers International 64 (2014) 139-142


  9. Mäder, E.; Malanin, M.; Plonka, R.
    Verbesserte mechanische Eigenschaften, Adhäsionsfestigkeit und Hydrolyseresistenz von Glascord more
    Technische Textilien/Technical Textiles (2014) 117-119, E105-E107


  10. Hoyer, M.; Drechsel, N.; Meyer, M.; Meier, C.; Hinüber, C.; Breier, A.; Hahner, J.; Heinrich, G.; Rentsch, C.; Garbe, L.-A.; Ertel, W.; Schulze-Tanzil, G.; Lohan, A.
    Embroidered polymer-collagen hybrid scaffold variants for ligament tissue engineering more
    Materials Science and Engineering / C 43 (2014) 290-299


  11. Shabanian, M.; Kang, N.-J.; Liu, J.; Wagenknecht, U.; Heinrich, G.; Wang, De-Yi
    Bio-based semi-aromatic polyamide/functional clay nanocomposites: preparation and properties more
    RSC Advances 4 (2014) 23420-23427


  12. Tzounis, L.; Kirsten, M.; Simon, F.; Mäder, E.; Stamm, M.
    The interphase microstructure and electrical properties of glass fibers covalently and non-covalently bonded with multiwall carbon nanotubes more
    Carbon 73 (2014) 310-324


  13. Krause, B.; Pötschke, P.; Gohs, U.
    Effects of high energy electrons on the properties of polyethylene / multiwalled carbon nanotubes composites: Comparison of as-grown and oxygen-functionalised MWCNT more
    AIP Conference Proceedings 1593 (2014) 290-293


  14. Tzounis, L.; Debnath, S.; Rooj, S.; Mäder, E.; Das, A.; Stamm, M.; Heinrich, G.
    High performance natural rubber compositives with a hierarchical reinforcement structure of carbon nanotube modified natural fibers more
    Materials and Design 58 (2014) 1-11


  15. Hinüber, C.; Chwalek, K.; Pan-Montojo, F.-J.; Nitschke, M.; Vogel, R.; Brünig, H.; Heinrich, G.; Werner, C.
    Hierarchically structured nerve guidance channels based on poly-3-hydroxybutyrate enhance oriented axonal outgrowth more
    Acta Biomaterialia 10 (2014) 2065-2095


  16. Rausch, J.; Mäder, E.
    Carbon nanotube-based interphase sensor for structural health monitoring in continuous glass fiber-reinforced polypropylene more
    in: Recent Advances in Adhesion Science and Technology in Honor of Dr. Kash Mittal, Gutowski, W.V.; Dodiuk, H., ed. (CRC Press 2014) 2014, 295-318


  17. Mikesova, J.; Slouf, M.; Gohs, U.; Popelková, D.; Vacková, T.; Vu, N. H.; Kratochvil, .J.; Zhigunov, A.
    Nanocomposites of polypropylene/titanate nanotubes: morphology, nucleation effects of nanoparticles and properties more
    Polymer Bulletin 71 (2014) 795-818


  18. Gohs, U.; Mondal, M.; Thakur, V.; Naskar, K.; Wagenknecht, U.; Heinrich, G.
    Ethylene propylene diene rubber and natural rubber based TPVs by electron induced reactive processing more
    Thermoplastic elastomers : TPE magazine international (2014) 37-30


  19. Salehi, S.; Bahners, T.; Gutmann, J.S.; Gao, S.-L.; Mäder, E.; Fuchsluger, T.A.
    Characterization of structural, mechanical and nano-mechanical properties of electrospun PGS/PCL fibers more
    RSC Advances 4 (2014) 16951-16957


  20. Burkert, S.; Simon, F.; Pleul, D.; Gohs, U.; Stamm, M.; Uhlmann, P.
    Surface characterization of electron-beam irradiated polymer brushes more
    Zeitschrift für Physikalische Chemie 228 (2014) 281-300


  21. Tran, N. H. A.; Brünig, H.; Hinüber, C.; Heinrich, G.
    Melt spinning of biodegradable nanofibrillary structures from poly(lactic acid) and poly(vinyl alcohol) blends more
    Macromolecular Materials and Engineering 299 (2014) 219-227


  22. Qi, H.; Liu, J.; Deng, Y.; Gao, S.-L.; Mäder, E.
    Cellulose fibres with carbon nanotube networks for water sensing more
    Journal of Materials Chemistry A 2 (2014) 5541-5547


  23. Zhandarov, S.; Mäder, E.
    Analysis of a pull-out test with real specimen geometry. Part II: the effect of meniscus more
    Journal of Adhesion Science and Technology 28 (2014) 65-84


  24. Saeb, M. R.; Bakhshandeh, E.; Khonakdar, H. A.; Mäder, E.; Scheffler, C.; Heinrich, G.
    Cure kinetics of epoxy nanocomposites affected by MWCNTs functionalization: A review more
    The Scientific World Journal 2013 (2013) Artical ID 703708, 14 pages


  25. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Additive free thermoplastic vulcanizates based on natural rubber more
    Materials Chemistry and Physics 143 (2013) 360-366


  26. Asadinezhad, A.; Khonakdar, H. A.; Scheffler, C.; Wagenknecht, U.; Heinrich, G.
    Poly(ethylene succinate)/single-walled carbon nanotube composites: a study on crystallization more
    Polymer Bulletin 70 (2013) 3463-3474


  27. Böhm, S.; Häntzschel, N.; Heinrich, G.; Mäder, E.; Thiede, H.; Wiegand, N.
    Binderdesign und Binderapplikation more
    in: Leichtbau mit Textilverstärkung für Serienanwendungen TU Dresden, Cherif, Chokri, ed. (Verlag Wissenschaftliche Scripten 2013) , 27-80


  28. Uhlig, K.; Spickenheuer, A.; Bittrich, L.; Heinrich, G.
    Development of a highly stressed bladed rotor made of CFRP using tailored fiber placement technology more
    Mechanics of Composite Materials 49 (2013) 201-210


  29. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Natural rubber based TPEs using accelerated electrons more
    Thermoplastic elastomers : TPE magazine international 5 (2013) 164-165


  30. Qi, H.; Mäder, E.; Liu, J.
    Unique water sensors based on carbon nanotube-cellulose composites more
    Sensors and Actuators B: Chemical 185 (2013) 225-230


  31. Qi, H.; Mäder, E.; Liu, J.
    Electrically conductive aerogels composed of cellulose and carbon nanotubes more
    Journal of Materials Chemistry A 1 (2013) 9714-9720


  32. Ghelichi, M.; Qazvini, N. T.; Jafari, S.H.; Khonakdar, H. A.; Farajollahi, Y.; Scheffler, C.
    Conformational, thermal, and ionic conductivity behavior of PEO in PEO/PMMA miscible blend: investigating the effect of lithium salt more
    Journal of Applied Polymer Science 129 (2013) 1868-1874


  33. Qi, H.; Liu, J.; Gao, S.-L.; Mäder, E.
    Multifunctional films composed of carbon nanotubes and cellulose regenerated from alkaline/urea solution more
    Journal of Materials Chemistry A 1 (2013) 2161-2168


  34. Sharma, M.; Bijwe, J.; Mäder, E.; Kunze, K.
    Strengthening of CF/PEEK interface to improve the tribological performance in low amplitude oscillating wear mode more
    Wear of Materials 301 (2013) 735-739


  35. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Efficiency of high energy electrons to produce polypropylene/natural rubber-based thermoplastic elastomer more
    Polymer Engineering and Science 53 (2013) 1696-1705


  36. Al-Farsi, M.; Abuagla, A.; Mohamed, E.; Gohs, U.
    The effect of electron beam on dates infestation more
    Food Control 33 (2013) 157-161


  37. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of `dry liquids` for post-processing crosslinking reactions more
    RFP Rubber Fibres Plastics for China (2013) 18-21


  38. Bellmann, C.; Plonka, R.; Caspari, A.; Grundke, K.
    Investigation of competitive adsorption of fibre sizing components: possibilities of electrokinetics more
    Composite Interfaces 20 (2013) 279-286


  39. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Preparation of natural rubber based thermoplastic vulcanizates by electron induced reactive processing more
    Kautschuk Gummi Kunststoffe 66 (2013) 47-50


  40. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Polypropylene/natural rubber thermoplastic vulcanizates by eco-friendly and sustainable electron induced reactive proecessing more
    Radiation Physics and Chemistry 88 (2013) 74-81


  41. Frick, A.; Sich, D.; Heinrich, G.; Lehmann, D.; Gohs, U.; Stern, C.
    Properties of melt processable PTFE/PEEK blends: the effect of reactive compatibilization using electron beam irradiated melt processable PTFE more
    Journal of Applied Polymer Science 128 (2013) 1815-1827


  42. Zhandarov, S.; Mäder, E.
    Analysis of a pull-out test with real specimen geometry. Part I: matrix droplet in the shape of a spherical segment more
    Journal of Adhesion Science and Technology 27 (2013) 430-465


  43. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of "dry liquids" for post-processing crosslinking reactions more
    Rubber Fibres Plastics International : RFP 8 (2013) 36-39


  44. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    High performance, natural rubber thermoplastic elastomers using accelerated electrons more
    SPE Plastics Research Online (2013) Article online


  45. Kundu, M. K.; Das, C. K.; Nigam, V.; Saxena, A. K.; Gohs, U.
    Effect of Nano Fillers on Polyphosphazene Elastomer under the influence of Temperature and Radiation: A Comparative Study more
    International Journal of Scientific Engineering and Technology 1 (2013) 169-176


  46. Scheffler, C.; Zhandarov, S.; Jenschke, W.; Mäder, E.
    Poly(vinal alcohol) fiber reinforced concrete: investigation of strain rate dependen interphase behavior with single fiber pullout test under quasi-static and high rate loading more
    Journal of Adhesion Science and Technology 27 (2013) 385-402


  47. Ma, Peng-Cheng; Liu, J.; Gao, S.-L.; Mäder, E.
    Development of functional glass fibres with nanocomposite coating: A comparative study more
    Composites: Part A 44 (2013) 16-22


  48. Radusch, H. J.; Kolesov, I.; Gohs, U.; Heinrich, G.
    Multiple shape-memory behavior of polyethylene/polycyclooctene blends cross-linked by electron irradiation more
    Advances in Science and Technology 77 (2013) 307-312


  49. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Gefälltes Calciumcarbonat als Trägerpartikel von Reagenzien für Vernetzungsreaktionen more
    GAK : Gummi Fasern Kunststoffe 65 (2012) 754-757


  50. Radusch, H. J.; Kolesov, I.; Gohs, U.; Heinrich, G.
    Multiple shape-memory behavior of polyethylene/polycyclooctene blends cross-linked by electron irradiation more
    Macromolecular Materials and Engineering 297 (2012) 1225-1234


  51. Wang, De-Yi; Gohs, U.; Kang, N.-J.; Leuteritz, A.; Boldt, R.; Wagenknecht, U.; Heinrich, G.
    Method for simultaneously improving thermal stability and mechanical properties of poly(lactic acid): Effect of high-energy electrons on the morphological, mechanical, and thermal properties of PLA/MMT nanocomposite more
    Langmuir 28 (2012) 12601-12608


  52. Petzold, G.; Petzold-Welcke, K.; Qi, H.; Stengel, K.; Schwarz, S.; Heinze, T.
    The removal of stickies with modified starch and chitosan - highly cationic and hydrophobic types compared with unmodified ones more
    Carbohydrate Polymers 90 (2012) 1712-1718


  53. Thunga, M.; Xia, Y.; Gohs, U.; Heinrich, G.; Larock, R. C.; Kessler, M. R.
    Influence of electron beam irradiation on the mechanical properties of vegetable-oil-based biopolymers more
    Macromolecular Materials and Engineering 297 (2012) 799-806


  54. Fan, Q.; Qin, Z.; Gao, S.-L.; Wu, Y.; Pionteck, J.; Mäder, E.; Zhu, M.
    The use of a carbon nanotube layer on a polyurethane multifilament substrate for monitoring strains as large as 400% more
    Carbon 50 (2012) 4085-4092


  55. Rajeshbabu, R.; Gohs, U.; Naskar, K.; Mondal, M.; Wagenknecht, U.; Heinrich, G.
    Electron-induced reactive processing of poly(propylene)/ethylene-octene copolymer blends: A novel route to prepare thermoplastic vulcanizates more
    Macromolecular Materials and Engineering 297 (2012) 659-669


  56. Le, H. H.; Hoang, X. T.; Das, A.; Gohs, U.; Stöckelhuber, K.W.; Boldt, R.; Heinrich, G.; Adhikari, R.; Radusch, H. J.
    Kinetics of filler wetting and dispersion in carbon nanotube/rubber composites more
    Carbon 50 (2012) 4543–4556


  57. Doan, T.T.L.; Brodowsky, H.; Mäder, E.
    Jute fibre/epoxy composites: surface properties and interfacial adhesion more
    Composites Science and Technology 72 (2012) 1160-1166


  58. Mousa, A.; Heinrich, G.; Gohs, U.; Wagenknecht, U.
    Mechanical properties of electron beam treated carboxylated nitrile butadiene rubber (XNBR) composites reinforced by organic/inorganic hybrid filler more
    Journal of Composite Materials 46 (2012) 1151-1157


  59. Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    In-situ modification of unmodified montmorillonite in polypropylene by electron-induced reactive processing more
    Macromolecular Chemistry and Physics 213 (2012) 729-737


  60. Mahmood, N.; Khan, Asad Ullah; Ali, Z.; Khan, M. Sohail; Haq, A. U.; Stöckelhuber, K.W.; Gohs, U.; Heinrich, G.
    Preparation and characterization of thermoplastic polyurethane–urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites more
    Journal of Applied Polymer Science 123 (2012) 3635-3643


  61. Uhlig, K.; Liebernickel, T.; Spickenheuer, A.; Heinrich, G.
    Entwicklung eines hochdrehzahlbeanspruchten Axiallaufrades aus kohlefaserverstärktem Epoxidharz mit einer beanspruchungsgerecht gestalteten Faserstruktur bei Verwendung der Tailored Fibre Placement Technologie more
    Technische Universität Chemnitz 13 (2012) 325-332


  62. Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Electron-induced reactive processing of thermoplastic vulcanizate based on polypropylene and ethylene propylene diene terpolymer rubber more
    Polymer Journal 44 (2012) 439-448


  63. Bittrich, L.; Spickenheuer, A.; Uhlig, K.; Heinrich, G.
    EPOPunch - ein neues Tool zur Effizienzsteigerung und Optimierung von Stickmustern und Faserverbundteilen more
    Technische Universität Chemnitz 13 (2012) 181-185


  64. Spickenheuer, A.; Bittrich, L.; Uhlig, K.; Heinrich, G.
    Makroskopische Modellbildung variabelaxialer und konturierter Versteifungsstrukturen more
    Technische Universität Chemnitz 13 (2012) 130-200


  65. Schmidt, T.; Hoburg, A. T.; Broziat, C.; Smith, M.; Gohs, U.; Pruss, A.; Scheffler, S.
    Sterilization with electron beam irradiation influences the biomechanical properties and the early remodelling of tendon allografts for reconstruction of the anterior cruciate ligament (ACL) more
    Cell and Tissue Banking 13 (2012) 387-400


  66. Schmidt, T.; Hoburg, A. T.; Gohs, U.; Schumann, W.; Sim-Brandenburg, J. W.; Nitsche, A.; Scheffler, S.; Pruss, A.
    The inactivation effect of standard and fractionated electron beam irradIation on enveloped and non-enveloped viruses in a tendon transplant model more
    Transfusion Medicine and Hemotherapy 39 (2012) 29-35


  67. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of 'dry liquids' for post-processing crosslinking reactions more
    e-Polymers no. 023 (2012) 9 Seiten, http://www.e-polymers.org


  68. Ma, P.-C.; Zheng, Q.-B.; Mäder, E.; Kim, Jang-Kyo
    Behavior of load transfer in functionalized carbon nanotube/epoxy nanocomposites more
    Polymer 53 (2012) 6081-6088


  69. Engelmann, G.; Gohs, U.; Ganster, J.
    Monomer cast polyamide 6 composites and their treatment with high-energy electrons more
    Journal of Applied Polymer Science 123 (2012) 1201-1211


  70. Kauffmann-Weiss, S.; Scheerbaum, N.; Liu, J.; Klauss, H. J.; Schultz, L.; Mäder, E.; Häßler, R.; Heinrich, G.; Gutfleisch, O.
    Reversible magnetic field induced strain in Ni2MnGa-polymer-composites more
    Advanced Engineering Materials 14 (2012) 20-27


  71. Rajeshbabu, R.; Naskar, K.; Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Preparation of polypropylene (PP) / ethylene octene copolymer (EOC) thermoplastic vulcanizates (TPVs) by electron induced reactive processing more
    Radiation Physics and Chemistry 80 (2011) 1398-1405


  72. Le, H. H.; Schoß, M.; Ilisch, S.; Gohs, U.; Heinrich, G.; Pham, T.; Radusch, H. J.
    CB filled EOC/EPDM blends as a shape-memory material: Manufacturing, morphology, and electrical properties more
    Polymer 52 (2011) 5858-5866


  73. Trey, S. M.; Gamstedt, K.; Mäder, E.; Jönsson, S.; Johansson, M.
    Glass fiber reinforced high glass transition temperature thiol-ene networks more
    Composites / Part A 42 (2011) 1800-1808


  74. Hoburg, A. T.; Keshlaf, S.; Schmidt, T.; Smith, M.; Gohs, U.; Perka, C.; Pruss, A.; Scheffler, S.
    Fractionation of high-dose electron beam irradiation of BPTB grafts provides significantly improved viscoelastic and structural properties compared to standard gamma irradiation more
    Knee surgery, sports traumatology, arthroscopy 19 (2011) 1955-1961


  75. Gramm, S.; Teichmann, J.; Nitschke, M.; Gohs, U.; Eichhorn, K.-J.; Werner, C.
    Electron beam immobilization of functionalized poly(vinyl methyl ether) thin films on polymer surfaces - Towards stimuli responsive coatings for biomedical purposes more
    eXPRESS Polymer Letters 5 (2011) 970-976


  76. Zhang, J.; Liu, J.; Zhuang, R.-C.; Mäder, E.; Heinrich, G.; Gao, S.-L.
    Single MWNT-glass fiber as strain sensor and switch more
    Advanced Materials 23 (2011) 3392-3397


  77. Ma, Peng-Cheng; Siddiqui, N. A.; Mäder, E.; Kim, Jang-Kyo
    Correlation between electrokinetic potential, dispersibility, surface chemistry and energy of carbon nanotubes more
    Composites Science and Technology (2011) 1644-1651


  78. Zhuang, R.-C.; Liu, J.; Plonka, R.; Huang, Y.-X.; Mäder, E.
    NaBF4 as a hygrothermal durability enhancer for glass fibre reinforced polypropylene composites more
    Composites Science and Technology 71 (2011) 1461-1470


  79. Rausch, J.; Mäder, E.
    Carbon nanotube coated glass fibres for interphase health monitoring in textile composites more
    Materials Technology 26 (2011) 153-158


  80. Lappan, U.; Geißler, U.; Gohs, U.
    Radiation-induced graft copolymerization of styrene into tetrafluoroethylene-hexafluoropropylene-vinylidene fluoride (THV) terpolymer films more
    Macromolecular Materials and Engineering 296 (2011) 843-849


  81. Gohs, U.; Leuteritz, A.; Naskar, K.; Volke, S.; Wießner, S.; Heinrich, G.
    Reactive EB processing of polymer compounds more
    Macromolecular Symposia 296 (2011) 589-595


  82. Zhuang, R.-C.; Doan, T.T.L.; Liu, J.; Zhang, J.; Gao, S.-L.; Mäder, E.
    Multi-functional multi-walled carbon nanotube-jute fibres and composites more
    Carbon 49 (2011) 2683-2692


  83. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Heinrich, G.; Werner, C.
    Hollow fibers made from a poly(3-hydroxybutyrate)/poly-e-caprolactone blend more
    eXPRESS Polymer Letters 5 (2011) 643-652


  84. Wagenknecht, U.; Gohs, U.; Leuteritz, A.; Volke, S.; Wießner, S.; Heinrich, G.
    Modification of particle filled polymers with high energy electrons under in-stationary conditions of melt mixing more
    Macromolecular Symposia 301 (2011) 146-150


  85. Gao, S.-L.; Mäder, E.
    Nano reinforcements in surface coatings and composite interphases more
    in: Advances in Nanocomposites, Boreddy Reddy, ed. (InTech 2011) , 837-854


  86. Gedan-Smolka, M.; Müller, A.; Gohs, U.; Calvimontes, A.
    Electron pretreatment of sheet molding compounds (SMC) more
    Progress in Organic Coatings (2011) 159-167


  87. Mechtcherine, V.; de Andrade Silva, F.; Butler, M.; Zhu, Deju; Mobasher, B.; Gao, S.-L.; Mäder, E.
    Behaviour of strain-hardening cement-based composites under high strain rates more
    Journal of Advanced Concrete Technology 9 (2011) 51-62


  88. Rudzinski, S.; Häußler, L.; Harnisch, C.; Mäder, E.; Heinrich, G.
    Glass fibre reinforced polyamide composites: Thermal behaviour of sizings more
    Composites / Part A 42 (2011) 157-164


  89. Hufenbach, W.; Böhm, R.; Thieme, M.; Winkler, A.; Mäder, E.; Rausch, J.; Schade, M.
    Polypropylene/glass fibre 3D-textile reinforced composites for automotive applications more
    Materials and Design 32 (2011) 1468-1476


  90. Rooj, S.; Thakur, V.; Gohs, U.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    In situ reactive compatibilization of polypropylene/epoxidized natural rubber blends electron induced reactive processing: novel in-line mixing technology more
    Polymers for Advanced Technologies 22 (2011) 2257-2263


  91. Rausch, J.; Zhuang, R.-C.; Mäder, E.
    Systematically varied interfaces of continuously reinforced glass fibre/polypropylene composites: Comparative evaluation of relevant interfacial aspects more
    eXPRESS Polymer Letters 4 (2010) 576-588


  92. Zhuang, R.-C.; Burghardt, T.; Plonka, R.; Liu, J.; Mäder, E.
    Affecting glass fibre surfaces and composite properties by two stage sizing application more
    eXPRESS Polymer Letters 4 (2010) 798-808


  93. Rausch, J.; Mäder, E.
    Health monitoring in continuous glass fibre reinforced thermoplastics: Tailored sensitivity and cyclic loading of CNT-based interphase sensors more
    Composites Science and Technology 70 (2010) 2023-2030


  94. Sritragool, K.; Michael, H.; Gehde, M.; Gohs, U.; Heinrich, G.
    Polypropylene/rubber particle blends by electron induced reactive processing more
    Kautschuk Gummi Kunststoffe 63 (2010) 554-558


  95. Thakur, V.; Leuteritz, A.; Gohs, U.; Kretzschmar, B.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    Montmorillonite nanocomposites with electron-beam modified atactic polypropylene more
    Applied Clay Science 49 (2010) 200-204


  96. Hoburg, A. T.; Keshlaf, S.; Schmidt, T.; Smith, M.; Gohs, U.; Perka, C.; Pruss, A.; Scheffler, S.
    Effect of electron beam irradiation on biomechanical properties of patellar tendon allografts in anterior cruciate ligament reconstruction more
    The American Journal of Sports Medicine 38 (2010) 1134-1140


  97. Heinrich, G.; Gohs, U.; Stöckelhuber, K.W.
    Leibniz Applikationslabor Multifunktionelle Polymerwerkstoffe more
    Dresdner Transferbrief 3.10 (2010) 15


  98. Sritragool, K.; Michael, H.; Gehde, M.; Gohs, U.; Heinrich, G.
    PP/rubber particle blends by high energy electron treatment under stationary condition more
    Kautschuk Gummi Kunststoffe 63 (2010) 377-382


  99. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Werner, C.
    Hollow poly(3-hydroxybutyrate) fibers produced by melt spinning more
    Macromolecular Materials and Engineering 295 (2010) 585-594


  100. Brodowsky, H.; Jenschke, W.; Mäder, E.
    Characterization of interphase properties: Microfatigue of single fibre model composites more
    Composites / Part A 41 (2010) 1579-1586


  101. Rausch, J.; Mäder, E.
    Health monitoring in continuous glass fibre reinforced thermoplastics: Manufacturing and application of interphase sensors based on carbon nanotubes more
    Composites Science and Technology 70 (2010) 1058-1596


  102. Lappan, U.; Geißler, U.; Gohs, U.; Uhlmann, St.
    Grafting of styrene into pre-irradiated fluoropolymer films: Influence of base material and irradiation temperature more
    Radiation Physics and Chemistry 79 (2010) 1067-1072


  103. Uhlig, K.; Spickenheuer, A.; Gliesche, K.; Karb, I.
    Strength of CFRP open hole laminates made from NCF, TFP and braided preforms under cyclic tensile loading more
    Plastics, Rubber and Composites 39 (2010) 247-255


  104. Rausch, J.; Zhuang, R.-C.; Mäder, E.
    Surfactant assisted dispersion of functionalized multi-walled carbon nanotubes in aqueous media more
    Composites / Part A 41 (2010) 1038-1046


  105. Gao, S.-L.; Zhuang, R.-C.; Zhang, J.; Liu, J.; Mäder, E.
    Glass fibre with carbon nanotube networks as Multifunctional sensors more
    Advanced Functional Materials 20 (2010) 1885-1893


  106. Zhuang, R.-C.; Burghardt, T.; Mäder, E.
    Study on interfacial adhesion strength of single glass fibre/polypropylene model composites by altering the nature of the surface of sized glass fibres more
    Composites Science and Technology 70 (2010) 1523-1529


  107. Mäder, E.
    Grenzschichtsensor zur Strukturüberwachung von faserverstärkten Verbundwerkstoffen more
    Dresdner Transferbrief 1.10 (2010) 17


  108. Zhang, J.; Zhuang, R.-C.; Liu, J.; Mäder, E.; Heinrich, G.; Gao, S.-L.
    Functional interphases with multi-walled carbon nanotubes in glass fibre/epoxy composites more
    Carbon 48 (2010) 2273-2281


  109. Rausch, J.; Zhuang, R.-C.; Mäder, E.
    Surfactant assisted processing of carbon nanotube/polypropylene composites: Impact of surfactants on the matrix polymer more
    Journal of Applied Polymer Science 117 (2010) 2583-2590


  110. Siddiqui, N. A.; Li, E. L.; Sham, M.-L.; Tang, B. Z.; Gao, S.-L.; Mäder, E.; Kim, J.-K.
    Tensile strength of glass fibres with carbon nanotube-epoxy nanocomposite coating: Effects of CNT morphology and dispersion state more
    Composites / Part A 41 (2010) 539-548


  111. Krucinska, I.; Gliscinska, E.; Mäder, E.; Häßler, R.
    Evaluation on the influence of glass fibre distribution in polyamide matrix during the consolidation process on the mechanical properties of GF/PA6 composites more
    Fibres & Textiles in Eastern Europe 17 (2009) 81-86


  112. Heinrich, G.; Breier, A.; Hinüber, C.
    Bioabbaubare Polymere in textiler Form für die regenerative Medizin more
    Dresdner Transferbrief 17 (2009) 12


  113. Scheffler, C.; Förster, T.; Mäder, E.; Heinrich, G.; Hempel, S.; Mechtcheringe, V.
    Aging of alkali-resistant glass and basalt fibers in alkaline solutions: Evaluation of the failure stress by weibull distribution function more
    Journal of Non-Crystalline Solids 355 (2009) 2588-2595


  114. Zhao, N. P.; Rödel, H.; Herzberg, C.; Gao, S.-L.; Krzywinski, S.
    Stitched glass/PP composite. Part I: Tensile and impact properties more
    Composites / Part A 40 (2009) 635-643


  115. Naskar, K.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    PP-EPDM thermoplastic vulcanisates (TPVs) by electron induced reactive processing more
    eXPRESS Polymer Letters 3 (2009) 677-683


  116. Rausch, J.; Zhuang, R.-C.; Mäder, E.
    Application of nanomaterials in sizings for glass fibre/polypropylene hybrid yarn spinning more
    Materials Technology 24 (2009) 29-35


  117. Thakur, V.; Das, A.; Mahaling, R. N.; Rooj, S.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Influence of layered double hydroxides on the curing of carboxylated nitrile rubber with zinc oxide more
    Macromolecular Materials and Engineering 294 (2009) 561-569


  118. Mousa, A.; Heinrich, G.; Gohs, U.; Häßler, R.; Wagenknecht, U.
    Application of renewable agro-waste-based olive pomace on the mechanical and thermal performance of toughened PVC more
    Polymer-Plastics Technology and Engineering 48 (2009) 1030-1040


  119. Burkert, S.; Gohs, U.; Uhlmann, P.; Stamm, M.
    Tuning of biocompatible thermo-sensitive polymer brushes by e-beam irradiation more
    Polymeric Materials: Science and Engineering 101 (2009) 1162


  120. Lappan, U.; Geißler, U.; Gohs, U.; Uhlmann, St.
    Influence of irradiation temperature on grafting of styrene into poly(tetrafluoroethylene-co-hexafluoropropylene) films more
    Macromolecular Materials and Engineering 294 (2009) 510-515


  121. Bahners, T.; Häßler, R.; Gao, S.-L.; Mäder, E.; Wego, A.; Schollmeyer, E.
    Photochemical surface modification of PP for abrasion resistance more
    Applied Surface Science 255 (2009) 9139-9145


  122. Cherif, C.; Rödel, H.; Hoffmann, G.; Diestel, O.; Herzberg, C.; Paul, C.; Schulz, C.; Großmann, K.; Mühl, A.; Mäder, E.; Brünig, H.
    Textile Technologien für hybridgarnbasierte komplexe Preformstrukturen more
    Zeitschrift Kunststofftechnik : Journal of plastics technology / Wissenschaftlicher Arbeitskreis der Universitäts-Professoren der Kunststofftechnik 6 (2009) 103-129


  123. Gehde, M.; Gohs, U.; Heinrich, G.; Michael, K.; Sritragool, K.; Wagenknecht, U.; Wießner, S.
    Modifizierung von Gummipartikel/Thermoplastmischungen mit energiereichen Elektronen more
    GAK : Gummi Fasern Kunststoffe 62 (2009) 88-93


  124. Scheffler, C.; Gao, S.-L.; Plonka, R.; Mäder, E.; Hempel, S.; Butler, M.
    Interphase modification of alkali-resistant glass fibres and carbon fibres for textile reinforced concrete II: Water adsorption and composite interphases more
    Composites Science and Technology 69 (2009) 905-912


  125. Scheffler, C.; Gao, S.-L.; Plonka, R.; Mäder, E.; Hempel, S.; Butler, M.; Mechtcheringe, V.
    Interphase modification of alkali-resistant glass fibres and carbon fibres for textile reinforced concrete I: Fibre properties and durability more
    Composites Science and Technology 69 (2009) 531-538


  126. Brodowsky, H.; Jenschke, W.; Mäder, E.
    Characterization of interphase properties by frequency-dependent cyclic loading of single fibre model composites more
    Journal of Adhesion Science and Technology 24 (2009) 237-253


  127. Khan, M. Sohail; Lehmann, D.; Heinrich, G.; Gohs, U.; Franke, R.
    Structure-property effects on mechanical, friction and wear properties of electron modified PTFE filled EPDM composite more
    eXPRESS Polymer Letters 3 (2009) 39-48


  128. Khan, M. Sohail; Franke, R.; Gohs, U.; Lehmann, D.; Heinrich, G.
    Friction and wear behaviour of electron beam modified PTFE filled EPDM compounds more
    Wear 266 (2009) 175-183


  129. Hasan, M. M. B.; Dutschk, V.; Brünig, H.; Mäder, E.; Häußler, L.; Häßler, R.; Cherif, C.; Heinrich, G.
    Comparison of tensile, thermal, anf thermo-mechanical properties of polyester filaments having different cross-sectional shape more
    Journal of Applied Polymer Science 111 (2008) 805-812


  130. Reichelt, S.; Eichhorn, K.-J.; Gohs, U.; Simon, F.; Fleischmann, S.; Voit, B.
    Immobilization of a hyperbranched polyester via grafting-to and electron beam irradiation more
    Langmuir 24 (2008) 9392-9400


  131. Spickenheuer, A.; Schulz, M.; Gliesche, K.; Heinrich, G.
    Using tailored fibre placement technology for stress adapted design of composite structures more
    Plastics, Rubber and Composites : Macromolecular Engineering 37 (2008) 227-232


  132. Schulze, U.; Sen Majumder, P.; Heinrich, G.; Stephan, M.; Gohs, U.
    Electron beam crosslinking of atactic polypropylene: Development of a potential novel elastomer more
    Macromolecular Materials and Engineering 293 (2008) 692-699


  133. Stephan, M.; Gohs, U.;Heinrich, G.; Volke, S.; Wagenknecht, U.
    Electron Treatment of Thermoplastics under Reactive Conditions more
    Proceedings of the Polymer Processing Society 24th Annual Meeting (2008) 3 Pages


  134. Gohs, U.; Heinrich, G.; Stephan, M.; Volke, S.; Wagenknecht, U.
    Electron Treatment of Polymer Melts under Static and Mixing Conditions more
    Proceedings of the Polymer Processing Society 24th Annual Meeting (2008) 3 Pages


  135. Vogel, R.; Voigt, D.; Tändler, B.; Gohs, U.; Häußler, L.
    Melt spinning of poly(3-hydroxybutyrate) for tissue engineering using electron-beam irradiated poly(3-hydroxybutyrate) as nucleation agent more
    Macromolecular Bioscience 8 (2008) 426-431


  136. Albrecht, V.; Reinsch, E.; Gohs, U.; Schünemann, R.; Husemann, K.; Simon, F.
    Zur elektrostatischen Trennung von Polyolefingemischen more
    Aufbereitungstechnik 49 (2008) 26-34


  137. Mäder, E.; Rausch, J.; Schmidt, N.
    Commingled yarns - Processing aspects and tailored surfaces for polypropylene/glass composites more
    Composites / Part A 39 (2008) 612-623


  138. Slouf, M.; Synkova, H.; Baldrian, J.; Marek, A.; Kovarova, J.; Schmidt, P.; Stephan, M.; Dorschner, H.; Gohs, U.
    Structural changes of UHMWPE after e-beam irradiation and thermal treatment more
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 85 (2008) 240-251


  139. Gao, S.-L.; Mäder, E.; Plonka, R.
    Nanocomposite coatings for healing surface defects of glass fibers and improving interfacial adhesion more
    Composites Science and Technology 68 (2008) 2892-2901


  140. Mäder, E.; Melcher, S.
    Adhesion of PBO fiber in epoxy composites more
    Journal of Donghua University 24 (2007) 173-177


  141. Burkert, S.; Schmidt, T.; Gohs, U.; Dorschner, H.; Arndt, K.-F.
    Cross-linking of poly(N-vinyl pyrrolidone) films by electron beam irradiation more
    Radiation Physics and Chemistry 76 (2007) 1324-1328


  142. Mäder, E.; Melcher, S.; Liu, J.; Gao, S.-L.; Bianchi, A. D.; Zherlitsyn, S.; Wosnitza, J.
    Adhesion of PBP fiber in epoxy composites more
    Journal of Materials Science 42 (2007) 8047-8052


  143. Mäder, E.; Gao, S.-L.; Plonka, R.; Wang, J.
    Investigation on Adhesion, Interphases, and Failure Behaviour of CBTÒ/ Glass Fiber Composites more
    Composites Science and Technology 67 (2007) 3140-3150


  144. Mäder, E.; Rothe, C.; Gao, S.-L.
    Commingled yarns of surface nanostructured glass and polypropylene filaments for effective composite properties more
    Journal of Materials Science 42 (2007) 8062-8070


  145. Gottlieb, R.; Kaiser, C.; Gohs, U.; Arndt, K.-F.
    Temperature sensitive hydrogels based on hydroxypropylcellulose by high energy irraduation more
    Macromolecular Symposia 254 (2007) 361-369


  146. de Lange, P. J.; Akker, P.G.; Mäder, E.; Gao, S.-L.; Prasithphol, W.; Young, R. J.
    Controlled interfacial adhesion of twaron aramid fibres in composites by the finish formulation more
    Composites Science and Technology 67 (2007) 2027-2035


  147. Burkert, S.; Schmidt, T.; Gohs, U.; Mönch, I.; Arndt, K.-F.
    Patterning of thin poly(N-vinyl pyrrolidone) films on silicon substrates by electron beam lithography more
    Journal of Applied Polymer Science 106 (2007) 534-539


  148. Bahners, T.; Opwis, K.; Schollmeyer, E.; Gao, S.-L.; Mäder, E.
    Atomic force microscopy based studies of photochemically-modified poly(ethylene terephthalate) surfaces more
    in: Polymer Surface Modification: Relevance to Adhesion, Volume 4, K.L. Mittal, ed. (VSP 2007) 4, 127-138


  149. Bellmann, C.; Plonka, R.; Caspari, A.; Luxbacher, T.
    Characterization of the interaction between silanes and solid surfaces by the streaming potential method more
    in: Silanes and Other Coupling Agents : Volume 4, K.L. Mittal, ed. (VSP 2007) 4, 39-47


  150. Vogel, R.; Tändler, B.; Voigt, D.; Jehnichen, D.; Häußler, L.; Peitzsch, L.; Brünig, H.
    Melt spinning of bacterial aliphatic polyester using reactive extrusion for improvement of crystallization more
    Macromolecular Bioscience 7 (2007) 820-828


  151. Melcher, S.; Mäder, E.; Gittel, D.; Urban, H.; Kaiser, M.
    Fasermodifizierung für PA 6-Verbunde hergestellt durch anionische Polymerisation / Fibre surface modification for PA 6 composites made by anionic polymerization more
    Technische Textilien/Technical Textiles 50 (2007) 28-31 / E28-E30


  152. Golzar, M.; Brünig, H.; Mäder, E.
    Commingled hybrid yarn diameter ratio in continuous fiber-reinforced thermoplastic composites more
    Journal of Thermoplastic Composite Materials 20 (2007) 17-26


  153. Doan, T.T.L.; Brodowsky, H.; Mäder, E.
    Jute fibre / polypropylene composites. II. Thermal, hydrothermal and dynamic mechanical behaviour more
    Composites Science and Technology 67 (2007) 2707-2714


  154. Gao, S.-L.; Mäder, E.; Plonka, R.
    Surface Defects Repairing by Polymer Coating with Low Fraction of Nano-reinforcements more
    Key Engineering Materials 334-335 (2007) 757-760


  155. Liu, J.; Gao, S.-L.; Mäder, E.; Bianchi, A. D.; Herrmannsdoerfer, T.; Zherlitsyn, S.; Zvyagin, S. A.; Wosnitza, J.
    Adhesion Issues in PBO/Epoxy Composites more
    Key Engineering Materials 334-335 (2007) 233-236


  156. Mäder, E.; Rothe, C.; Brünig, H.; Leopold, T.
    Online spinning of commingled yarns - equipment and yarn modification by tailored fibre surfaces more
    Key Engineering Materials 334-335 (2007) 229-232


  157. Gao, S.-L.; Mäder, E.; Plonka, R.
    Nanostructured coatings of glass fibers: Improvement of alkali reistance and mechanical properties more
    Acta Materialia 55 (2007) 1043-1052


  158. Mäder, E.; Gao, S.-L.; Plonka, R.
    Static and dynamic properties of single and multi-fiber/epoxy composites modified by sizings more
    Composites Science and Technology 67 (2007) 1105-1115


  159. Zhandarov, S.; Mäder, E.
    Increase in the molecular component of the adhesive pressure in polymer composites induced by electric charge more
    Composite Interfaces 13 (2006) 865-897


  160. Mäder, E.; Rothe, C.
    Tailoring of commingled yarns for effective composite properties more
    Chemical Fibers International 56 (2006) 298-300


  161. Mäder, E.; Rothe, C.
    Maßschneidern von Hybridgarnen für effektive Verbundeigenschaften / Tailoring of commingled yarns for effective composite properties more
    Technische Textilien/Technical Textiles 49 (2006) 155-158 / E114-E116


  162. Zhandarov, S.; Gorbatkina, Yu.A.; Mäder, E.
    Adhesional pressure as a criterion for interfacial failure in fibrous microcomposites and its determination using a microbond test. more
    Composite Science and Technology 66 (2006) 2610-2628


  163. Doan, T.T.L.; Gao, S.-L.; Mäder, E.
    Jute/polypropylene composites. I. Effect of matrix modification more
    Composites Science and Technology 66 (2006) 952-963


  164. Gast, F.-U.; Dittrich, P.S.; Schwille, P.; Weigel, M.; Mertig, M.; Opitz, J.; Queitsch, U.; Diez, S.; Lincoln, B.; Wottawah, J.; Schinkinger, S.; Guck, J.; Käs, J.; Smolinski, J.; Salchert, K.; Werner, C.; Duschl, C.; Jäger, M.S.; Uhlig, K.; Geggier, P.; Howitz, S.
    The microscopy cell (MicCell), a versatile modular flowthrough system for cell biology, biomaterial research, and nanotechnology more
    Microfluidics and Nanofluodics 2 (2006) 21-36


  165. Ehrentraut, W.; Plonka, R.; Mäder, E.; Gao, S.-L.
    Pilotno postrojenje za ispredanje staklenih vlakana postojanih na alkalije more
    Tekstil 54 (2005) 286-289


  166. Zhandarov, S.; Pisanova, E.; Mäder, E.
    Is there any contradiction between the stress and energy failure criteria in micromechanical tests? Pt. III. Experimental observation of crack propagation in the microbond test more
    Journal of Adhesion Science and Technology 19 (2005) 679-704


  167. Zhandarov, S.; Mäder, E.
    Peak force as function of the embredded length in pull-out and microbond tests: effect of specimen geometry more
    Journal of Adhesion Science and Technology 19 (2005) 817-856


  168. Gao, S.-L.; Häßler, R.; Mäder, E.; Bahners, T.; Opwis, K.; Schollmeyer, E.
    Photochemical surface modification of PET by excimer UV lamp irradiation more
    Applied Physics / B 81 (2005) 681-690


  169. Bellmann, C.; Caspari, A.; Albrecht, V.; Doan, T.T.L.; Mäder, E.; Luxbacher, T.; Kohl, R.
    Electrokinetic properties of natural fibres more
    Colloids and Surfaces A: Physicochemical and Engineering Aspects 267 (2005) 19-23


  170. Mäder, E.
    Hybridgarne für hoch beanspruchte Leichtbauteile more
    Konstruktion 57 (2005)


  171. Hufnagel, E.; Mäder, E.; Keusch, S.; Arnold, R.
    Einsatz von "heavy tows" für bi- und multiaxiale Gewirke zur Kunststoffverstärkung = Heavy tows used with biaxial and multiaxial knits to reinforce plastic materials more
    Technische Textilien/Technical Textiles 48 (2005) 119-123, E103-E107


  172. Plonka, R.; Rothe, C.; Mäder, E.
    Beschichtete alkaliresistente Glasfäden und Hybridgarne als Bewehrung in Beton = Coated Alkali-resistant Glass Fibres and Hybrid Yarns for Textile Reinforced Concrete more
    Technische Textilien/Technical Textiles 48 (2005) 150-152, E122-124


  173. Rothe, C.; Mrozik, B.; Hoffmann, G.; Offermann, P.
    Einfluss des Klebstoffs auf die Haftkraft von Flockfasern = Investigation of the influence of adhesives on the bonding strength of flock fibers more
    Technische Textilien/Technical Textiles 48 (2005) 111-113, E98-E99


  174. Ehrentraut, W.; Plonka, R.; Mäder, E.; Gao, S.-L.
    Pilotanlage zum Erspinnen alkaliresistenter Glasfasern = Pilot equipment for continuous spinning of alkaline resistant glass fibers more
    Technische Textilien/Technical Textiles 48 (2005) 22-24, E23-E25


  175. Ogawa, A.; Winkler, A. R.; Oono, T.; Okabe, H.; Ooyagi, T.; Akiba, N.; Ogawa, K.; Oono, W.; Sinya, S.; Washizu, M.
    Fluid Dynamical Characteristics of Pressure Drop of Air Flow in Two Kinds of Cylindrical Vortex Chambers for Control of Vortex Flow more
    Journal of the College of Engineering Nihon University 46 (2005) 19-36


  176. Plonka, R.; Mäder, E.; Rothe, C.; Köckritz, U.; Waldmann, M.; Klug, P.
    Effective Reinforcement of Concrete by On-line Polymer Coating = Effiziente textile Bewehrungen für Beton durch Online-Polymerbeschichtung more
    Technische Textilien/Technical Textiles 48 (2005) 205-207, E161-E163


  177. Zhandarov, S.; Mäder, E.
    Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters more
    Composite Science and Technology 65 (2005) 149-160


  178. Brantseva, T.V.; Gorbatkina, Yu.A.; Mäder, E.; Dutschk, V.; Kerber, M.L.
    Modification of epoxy resin by polysulfone to improve the interfacial and mechanical properties in glass fibre composites. II. adhesion of the epoxy-polysulfone matrices to glass fibres more
    Journal of Adhesion Science and Technology 18 (2004) 1293-1308


  179. Zhandarov, S.; Mäder, E.
    Determination of interfacial parameters in fiber-polymer systems from a pull-out test data using a bilinear bond law more
    Composite Interfaces 11 (2004) 361-391


  180. Mäder, E.
    Reduced weight fibre-reinforced polymers more
    CORDIS Focus RTD Results Supplement 47 (2004) 39


  181. Gao, S.-L.; Mäder, E.; Plonka, R.
    Coatings for glass fiber in a cementitious matrix more
    Acta Materialia 52 (2004) 4745-4755


  182. Schorn, H.; Raupach, M.; Brameshuber, W.; Höcker, H.; Mäder, E.; Arnold, B.J.A.; Brockmann, T.; Hempel, R.; Orlowsky, J.; Plonka, R.
    Betontechnologie und Dauerhaftigkeit von glasfaserbewehrten Bauteilen more
    Beton- und Stahlbetonbau 99 (2004) 444-451


  183. Mäder, E.; Gao, S.-L.; Plonka, R.
    Enhancing the Properties of Composites by Controlling Their Interphase Parameters more
    Advanced Engineering Materials 6 (2004) 147-150


  184. Plonka, R.; Mäder, E.; Gao, S.-L.; Bellmann, C.; Dutschk, V.; Zhandarov, S.
    Adhesion in epoxy/glass fibre composites influenced by aging effects on sizings more
    Composites / Part A 35 (2004) 1207-1216


  185. Mäder, E.; Plonka, R.; Schiekel, M.; Hempel, R.
    Coatings on alkali-resistant Glass Fibres for the Improvement of Concrete more
    Journal of Industrial Textiles 33 (2004) 191-207


  186. Gao, S.-L.; Mäder, E.; Zhandarov, S.
    Carbon fibres and composites with epoxy resins: Topography, fractography and interphases more
    Carbon 42 (2004) 515-529


  187. Gao, S.-L.; Mäder, E.; Abdkader, A.; Offermann, P.
    Environmental resistance and mechanical performance of alkali-resistant glass fibers with surface sizings more
    Journal of Non-Crystalline Solids 325 (2003) 230-241


  188. Zhandarov, S.; Mäder, E.
    Indirect estimation of fiber/polymer bond strength and interfacial friction from maximum load values recorded in the microbond and pull-out tests. Part II: Critical energy release rate more
    Journal of Adhesion Science and Technology 17 (2003) 967-980


  189. Bellmann, C.; Plonka, R.; Synytska, A.; Caspari, A.; Schinner, R.; Grundke, K.
    Verbundwerkstoffe
    Untersuchung der Wechselwirkungskräfte in glasfaserverstärkten Polymerverbunden
    more
    Wiley-VCH (2003) 476-482


  190. Zhandarov, S.; Mäder, E.
    Some reflections on 'self-consistent' approach to the calculation of acid-base parameters of solids and liquids from wetting data more
    Composite Interfaces 10 (2003) 41-59


  191. Mäder, E.; Gao, S.-L.; Plonka, R.
    Verbundwerkstoffe
    Verbundwerkstoffe mit höheren Gebrauchseigenschaften durch Steuerung der Grenzschichtparameter
    more
    Wiley-VCH (2003) 483-488


  192. Talaie, A.; Lee, Y.K.; Jang, J.; Choo, D.J.; Park, S.M.; Lee, J.Y.; Park , S.H.; Huh, G.; Taguchi, T.; Mäder, E.
    Smart Polymers, Copolymers and Composites with Light Emission Ability: Millennium Products for Intelligent Displays for Navigation in the Transportation Industry more
    International Journal of Materials & Product Technology 19 (2003) 304-313


  193. Talaie, A.; Lee, Y.K.; Jang, J.; Choo, D.J.; Park, S.M.; Lee, J.Y.; Park , S.H.; Huh, G.; Taguchi, T.; Mäder, E.
    Composite based polymeric displays: an introduction to a new smart engineering approach to incorporate transition metals to the polymer matrix more
    International Journal of Materials & Product Technology 19 (2003) 314-323


  194. Gao, S.-L.; Mäder, E.; Abdkader, A.; Offermann, P.
    Sizings on Alkali-Resistant Glass Fibers: Environmental Effects on Mechanical Properties more
    Langmuir 19 (2003) 2496-2506


  195. Nygard, P.; Grundke, K.; Mäder, E.; Bellmann, C.
    Wetting kinetics and adhesion strength between polypropylene melt and glass fibre: influence of chemical reactivity and fibre roughness more
    Journal of Adhesion Science and Technology 16 (2002) 1781-1808


  196. Mäder, E.; Zhou, X.-F.; Zhandarov, S.; Nutt, S.R.; Gao, S.-L.
    Bond Strength Measurement between Glass Fibres and Epoxy Resin at Elevated Temperatures Using the Pull-Out and Push-Out Techniques more
    Journal of Adhesion 78 (2002) 547-570


  197. Zhandarov, S.; Mäder, E.; Yurkevich, O.R.
    Indirect estimation of polymer/fiber bond strength and interfacial friction from maximum load values recorded in the microbond and pull-out tests. Part I: Local bond strength more
    Journal of Adhesion Science and Technology 16 (2002) 1171-1200


  198. Gao, S.-L.; Mäder, E.
    Characterisation of interphase nanoscale property variations in glass fibre reinforced polypropylene and epoxy resin composites more
    Composites / Part A 33 (2002) 559-576


  199. Offermann, P.; Diestel, O.; Choi, B.-D.; Mäder, E.; Hübner, T.
    Weiterentwicklung von Comingling-Hybridgarnen für thermoplastische Faserverbundwerkstoffe = Advancement of comingling hybrid yarns for thermoplastic fiber reinforced composites more
    Technische Textilien/Technical Textiles 45 (2002) 16-18, E12-E14


  200. Zinck, P.; Mäder, E.; Gerard, J.F.
    Role of Silane Coupling Agent and Polymeric Film Former for Tailoring Glass Fiber Sizings from Tensile Strength Measurements more
    Journal of Materials Science 36 (2001) 5245-ff.


  201. Offermann, P.; Diestel, O.; Choi, B.-D.; Mäder, E.; Hübner, T.
    Optimierung des Commingling-Prozesses zur Herstellung von Hybridgarnen für langfaserverstärkte Thermoplaste (AiF-Projekt Nr. 11644 B) more
    ITB-Mitteilungen : Institut für Textil- und Bekleidungstechnik (2001)


  202. Fu, S.-Y.; Lauke, B.; Mäder, E.; Yue, C. Y.; Hu, X.; Mai, Y.W.
    Hybrid effects on tensile properties of hybrid short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites more
    Journal of Materials Science 36 (2001) 1243-1251


  203. Pisanova, E.; Zhandarov, S.; Mäder, E.; Young, R. J.; Ahmad, I.
    Three techniques of interfacial bond strength estimation from direct observation of crack initiation and propagation in polymer-fibre systems more
    Composites / Part A 32 (2001) 435-443


  204. Pisanova, E.; Zhandarov, S.; Mäder, E.
    How can adhesion be determined from micromechanical tests? more
    Composites / Part A 32 (2001) 425-434


  205. de Lange, P. J.; Mäder, E.; Mai, K.; Young, R. J.; Ahmad, I.
    Characterization and micromechanical testing of the interphase of aramid-reinforced epoxy composites more
    Composites / Part A 32 (2001) 331-342


  206. Mäder, E.; Gao, S.-L.
    Prospect of nanoscale interphase evaluation to predict composite properties more
    Journal of Adhesion Science and Technology 15 (2001) 1015-1037


  207. Talaie, A.; Lee, J.Y.; Lee, Y.K.; Adachi, K.; Taguchi, T.; Mäder, E.; Jang, J.; Romagnoli, J.A.
    Dynamic modeling of a polymeric composite interface: An introduction to in-situ neurocomputing in composite-based PH sensors more
    Composite Interfaces 8 (2001) 127-134


  208. Dutschk, V.; Mäder, E.; Rudoy, V.
    Determination of polarity parameters for glass fibres by inverse gas chromatography: Some results and remarks more
    Journal of Adhesion Science and Technology 15 (2001) 1373-1389


  209. Häßler, R.; Mäder, E.
    Verbundwerkstoffe und Werkstoffverbunde
    Mikrothermische Charakterisierung von Grenzschichten
    more
    Wiley-VCH (2001) 37-43


  210. Mäder, E.; Moos, E.; Karger-Kocsis, J.
    Role of film formers in glass fibre reinforced polypropylene - new insights and relation to mechanical properties more
    Composites / Part A 32 (2001) 631-639


  211. Zhandarov, S.; Pisanova, E.; Mäder, E.; Nairn, J.A.
    Investigation of load transfer between the fiber and the matrix in pull-out tests with fibers having different diameters more
    Journal of Adhesion Science and Technology 15 (2001) 205-222


  212. Mäder, E.; Pisanova, E.
    Interfacial design in fiber reinforced polymers more
    Macromolecular Symposia 163 (2001) 189-212


  213. Bogoeva-Gaceva, G.; Janevski, A.; Mäder, E.
    Nucleation activity of glass fibers towards iPP evaluated by DSC and polarizing light microscopy more
    Polymer 42 (2001) 4409-4416


  214. Mäder, E.
    Interphase Characterisation and Study of Structure-Property Relations of Fibre-Reinforced Polymers (BETN 96 0507) more
    Newsletter TRA Polymer Materials (2000)


  215. Talaie, A.; Lee, Y.K.; Jang, J.; Choo, D.J.; Kim, K.M.; Park , S.H.; Huh, G.; Lee, J.Y.; Taguchi, T.; Mäder, E.; Esmaili, N.
    Investigation on painting polymer with light emission ability on a substrate and three means to enhance the light emission to fabricate new display devices more
    Iranian Polymer Journal 9 (2000) 169-175


  216. van Ooij, W. J.; Luo, S.; Mäder, E.; Mai, K.
    Improved rubber adhesion to textile tire cords by deposition of plasma-polymerized films more
    in: Polymer Surface Modification: Relevance to Adhesion, Volume 2, K.L. Mittal, ed. (VSP 2000) 2, 225-241


  217. Pisanova, E.; Dutschk, V.; Zhandarov, S.; Mäder, E.
    "Fundamental" and "practical" adhesion in polymer-fiber systems more
    in: Polymer Surface Modification: Relevance to Adhesion, Volume 2, K.L. Mittal, ed. (VSP 2000) 2, 479-503


  218. Zhandarov, S.; Pisanova, E.; Mäder, E.
    Is there any contradiction between the stress and energy failure criteria in micromechanical tests? Pt. II. Crack propagation: Effect of friction on force-displacement curves more
    Composite Interfaces 7 (2000) 149-175


  219. Mäder, E.; Mai, K.; Pisanova, E.
    Interphase characterization on polymer composites - monitoring of interphasial behavior in dependence on the mode of loading more
    Composite Interfaces 7 (2000) 133-147


  220. Bogoeva-Gaceva, G.; Mäder, E.; Queck, H.
    Properties of Glass Fiber Polypropylene Composites Produced from Split-Warp-Knit Textile Preforms more
    Journal of Thermoplastic Composite Materials 13 (2000) 363-377


  221. Pompe, G.; Mäder, E.
    Experimental detection of a transcrystalline interphase in glass fibre/polypropylene composites more
    Composite Science and Technology 60 (2000) 2159-2167


  222. Fu, S.-Y.; Lauke, B.; Mäder, E.; Yue, C. Y.; Fu, S.-Y.
    Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites more
    Composites / Part A 31 (2000) 1117-1125


  223. Mäder, E.; Pisanova, E.
    Characterization and Design of Interphases in Glass Fiber Reinforced Polypropylene more
    Polymer Composites 21 (2000) 361-368


  224. Bogoeva-Gaceva, G.; Mangovska, B.; Mäder, E.
    Crystallization Kinetics of Maleic Anhydride-Modified iPP Studied by POM more
    Journal of Applied Polymer Science 77 (2000) 3107-3118


  225. Mäder, E.; Zhou, X.-F.; Pisanova, E.; Zhandarov, S.; Nutt, S.R.
    Characterization of the interfacial bond strength between glass fibre and epoxy resin using the pull-out and push-out techniques more
    Advanced Composites Letters 9 (2000) 2203-2209


  226. Mäder, E.; Gao, S.-L.; Kim, J.-K.
    Interface Controlled Materials
    New Nano-Scale Characterization Techniques for Interphases
    more
    Wiley-VCH (2000) 237-242


  227. Luo, S.; van Ooij, W. J.; Mäder, E.; Mai, K.
    Surface modification of textile tire cords by plasma polymerization for improvement of rubber adhesion more
    Rubber Chemistry and Technology 73 (2000) 121-137


  228. Talaie, A.; Lee, J.Y.; Lee, Y.K.; Jang, J.; Romagnoli, J.A.; Taguchi, T.; Mäder, E.
    Dynamic sensing using intelligent composite: an investigation to development of new pH sensors and electrochromic devices more
    Thin Solid Films 363 (2000) 163 - 166


  229. Pisanova, E.; Mäder, E.
    Acid-base interactions and covalent bonding at a fiber-matrix interface: contribution to the work of adhesion and measured adhesion strength more
    Journal of Adhesion Science and Technology 14 (2000) 415-436


  230. Bogoeva-Gaceva, G.; Janevski, A.; Mäder, E.
    Characterization of a maleic anhydride-modified polypropylene as an adhesion promoter for glass fiber composites more
    Journal of Adhesion Science and Technology 14 (2000) 363-380


  231. Jacobasch, H.-J.; Grundke, K.; Mäder, E.; Freitag, K.-H.; Panzer, U.
    Application of the surface free energy concept in polymer processing more
    Journal of Adhesion Science and Technology 6 (1992) 1381-1396


 
Publications
Publikationen

Departments

Composite Materials

News