Abteilungen und Gruppen > Verarbeitungsprozesse > Publikationen

Publikationen

  1. Monami, A.; Reincke, K.; Grellmann, W.; Kretzschmar, B.
    Temperature dependence of fracture behaviour of PA6/OMMT nanocomposites mehr
    Journal of Applied Polymer Science 128 (2013) 1885-1894


  2. Asadinezhad, A.; Khonakdar, H. A.; Jafari, S.H.; Simon, F.; Wagenknecht, U.
    A surface analysis of polypropylene/clay nanocomposites exposed to electron irradiation mehr
    Journal of Applied Polymer Science 128 (2013) 1569-1574


  3. Kutlu, B.; Leuteritz, A.; Boldt, R.; Jehnichen, D.; Wagenknecht, U.; Heinrich, G.
    PANI-LDH prepared by polymerization-adsorption method and processing to conductive compounds mehr
    Applied Clay Science 72 (2013) 91-95


  4. Khonakdar, H. A.; Ehsani, M.; Asadinezhad, A.; Jafari, S.H.; Wagenknecht, U.
    Nanofilled polypropylene/poly(trimethylene terephthalate) blends: A morphological and mechanical properties study mehr
    Journal of Macromolecular Science Part B - Physics 52 (2013) 897-909


  5. Mostafaiyan, M.; Saeb, M. R.; Ahmadi, Z.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    A numerical study on deformation of Newtonian droplets throug converging cylindrical dies mehr
    e-Polymers (2013) 1-18


  6. Saeb, M. R.; Ramezani-Dakhel, H.; Khonakdar, H. A.; Heinrich, G.; Wagenknecht, U.
    A comparative study on curing characteristics and thermomechanical properties of elastomeric nanocomposites: the effects of eggshell and calcium carbonate nanofillers mehr
    Journal of Applied Polymer Science 127 (2013) 4241-4250


  7. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Thermal properties of Carboxylated nitrile rubber/nylon-12 composites-filled lignocellulose materials mehr
    Journal of Thermoplastic Composite Materials 26 (2013) Online First


  8. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of "dry liquids" for post-processing crosslinking reactions mehr
    Rubber Fibres Plastics International : RFP 8 (2013) 36-39


  9. Lonkar, S. P.; Leuteritz, A.
    Antioxidant intercalated layered double hydroxides: a new multifunctional nanofiller for polymers mehr
    RSC Advances 3 (2013) 1495-1501


  10. Lonkar, S. P.; Kutlu, B.; Leuteritz, A.; Lonkar, S. P.
    Nanohybrids of phenolic antioxidant intercalated into MgAl-layered double hydroxide clay mehr
    Applied Clay Science 71 (2013) 8-14


  11. Kundu, M. K.; Das, C. K.; Nigam, V.; Saxena, A. K.; Gohs, U.
    Effect of nano fillers on polyphospjazene elastomer under the influence of temperature and radiation: a comparative study mehr
    International Journal of Scientific Engineering and Technology 1 (2013) 169-176


  12. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Efficiency of high energy electrons to produce polypropylene/natural rubber-based thermoplastic elastomer mehr
    Polymer Engineering and Science 53 (2013) Early view


  13. Ashabi, L.; Jafari, S.H.; Khonakdar, H. A.; Boldt, R.; Wagenknecht, U.; Heinrich, G.
    Tuning the processability, morphology and biodegradability of clay incorporated PLA/LLDPE blends via selective localization of nanoclay induced by melt mixing sequence mehr
    eXPRESS Polymer Letters 7 (2013) 21-39


  14. Radusch, H. J.; Kolesov, I.; Gohs, U.; Heinrich, G.
    Multiple shape-memory behavior of polyethylene/polycyclooctene blends cross-linked by electron irradiation mehr
    Advances in Science and Technology 77 (2013) 307-312


  15. Entezaam, M.; Khonakdar, H. A.; Yousefi, A. A.; Jafari, S.H.; Wagenknecht, U.; Heinrich, G.
    On nanoclay localization in polypropylene/poly(ethylene terephthalate) blends: Correlation with thermal and mechanical properties mehr
    Materials and Design 45 (2012) 110-117


  16. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Gefälltes Calciumcarbonat als Trägerpartikel von Reagenzien für Vernetzungsreaktionen mehr
    GAK : Gummi Fasern Kunststoffe 65 (2012) 754-757


  17. Radusch, H. J.; Kolesov, I.; Gohs, U.; Heinrich, G.
    Multiple shape-memory behavior of polyethylene/polycyclooctene blends cross-linked by electron irradiation mehr
    Macromolecular Materials and Engineering 297 (2012) 1225-1234


  18. Lonkar, S. P.; Kushwaha, O. S.; Leuteritz, A.; Heinrich, G.; Singh, R. P.
    Self photostabilizing UV-durable MWCNT/polymer nanocomposites mehr
    RSC Advances 2 (2012) 12255-12262


  19. Wang, De-Yi; Gohs, U.; Kang, N.-J.; Leuteritz, A.; Boldt, R.; Wagenknecht, U.; Heinrich, G.
    Method for simultaneously improving thermal stability and mechanical properties of poly(lactic acid): Effect of high-energy electrons on the morphological, mechanical, and thermal properties of PLA/MMT nanocomposite mehr
    Langmuir 28 (2012) 12601-12608


  20. Breier, A.; Hofmann, A.; Rentsch, C.; Rentsch, B.; Gliesche, K.; Scharnweber, D.; Heinrich, G.
    Integrating a drug release system into textile long bone implants by dip-coating from drug-suspension - influence of grain size and grain size distribution on the releasing profile mehr
    Drug Delivery Letters 2 (2012) 171-179


  21. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    The effect of silane treated hybrid filler on the mechanical and thermal performance of carboxylated nitrile butadiene rubber (XNBR) composites mehr
    International Polymer Processing 27 (2012) 328-333


  22. Hintze, C.; Wießner, S.; Wagenknecht, U.; Heinrich, G.
    Einfluss von Verarbeitungsparametern auf Morphologie und Anwendungseigenschaften von aramidkurzfaserverstärkten Elastomercomposites mehr
    GAK : Gummi Fasern Kunststoffe 65 (2012) 562-567


  23. Mousa, A.; Heinrich, G.; Simon, F.; Wagenknecht, U.; Stöckelhuber, K.W.; Dweiri, R.
    Carboxylated nitrile butadiene rubber/hybrid filler composites mehr
    Materials Research 15 (2012) 671-678


  24. Frick, A.; Sich, D.; Heinrich, G.; Lehmann, D.; Gohs, U.; Stern, C.
    Properties of melt processable PTFE/PEEK blends: the effect of reactive compatibilization using electron beam irradiated melt processable PTFE mehr
    Journal of Applied Polymer Science 128 (2012) 1815-1827


  25. Thunga, M.; Xia, Y.; Gohs, U.; Heinrich, G.; Larock, R. C.; Kessler, M. R.
    Influence of electron beam irradiation on the mechanical properties of vegetable-oil-based biopolymers mehr
    Macromolecular Materials and Engineering 297 (2012) 799-806


  26. Saeb, M. R.; Khonakdar, H. A.; Razban, M.; Jafari, S.H.; Garmabi, H.; Wagenknecht, U.
    Morphology prediction in HDPE/PA-6/EVOH ternary blends: defining the role of elasticity ratio mehr
    Macromolecular Chemistry and Physics 213 (2012) 1791-1802


  27. Wawrzyn, E.; Schartel, B.; Ciesielski, M.; Kretzschmar, B.; Braun , U.; Döring, M.
    Are novel aryl phosphates competitors for bisphenol a bis(diphenyl phosphate) in halogen-free flame-retarded polycarbonate/acrylonitrile-butadiene-styrene blends? mehr
    European Polymer Journal 48 (2012) 1561-1574


  28. Li, X.; Kretzschmar, B.; Janke, A.; Häußler, L.; Schneider, K.; Stamm, M.
    Investigation of structure and mechanical behavior pf polyamide 6/ZnO and polyamide 6/Al2O3 nanocomposites mehr
    Advanced Materials Research 557-559 (2012) 272-276


  29. Grothe, J.; Kaskel, S.; Leuteritz, A.
    Nanocomposites and hybrid mateials mehr
    in: Polymer Science: A Comprehensive Reference, Moeller, M.; Matyjaszewski, K., ed. (Elsevier 2012) , 8.08, 177-209


  30. Rajeshbabu, R.; Gohs, U.; Naskar, K.; Mondal, M.; Wagenknecht, U.; Heinrich, G.
    Electron-induced reactive processing of poly(propylene)/ethylene-octene copolymer blends: A novel route to prepare thermoplastic vulcanizates mehr
    Macromolecular Materials and Engineering 297 (2012) 659-669


  31. Le, H. H.; Hoang, X. T.; Das, A.; Gohs, U.; Stöckelhuber, K.W.; Boldt, R.; Heinrich, G.; Adhikari, R.; Radusch, H. J.
    Kinetics of filler wetting and dispersion in carbon nanotube/rubber composites mehr
    Carbon 50 (2012) 4543–4556


  32. Wießner, S.; Wagenknecht, U.; Heinrich, G.; Michael, H.; Mennig, G.
    Continuous reactive compounding of elastomeric alloys based on ground tyre rubber and polypropylene in a co-rotating twin screw extruder mehr
    Kautschuk Gummi Kunststoffe 65 (2012) 28-36


  33. Jafari, S.H.; Asadinezhad, A.; Kalati-vahid, A.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    Polypropylene/poly(trimethylene terephthalate) blend nanocomposite: a thermal properties study mehr
    Polymer-Plastics Technology and Engineering 51 (2012) 682-688


  34. Mousa, A.; Heinrich, G.; Wagenknecht, U.; Kretzschmar, B.; Auf der Landwehr, M.
    The Application of Di-isocyante modified agro-polymer as filler for XNBR/PA-12 thermoplastic elastomer composites mehr
    Journal of Macromolecular Science - A: Pure Applied Chemistry 49 (2012) 385-396


  35. Wang, De-Yi; Das, A.; Leuteritz, A.; Mahaling, R. N.; Jehnichen, D.; Wagenknecht, U.; Heinrich, G.
    Structural characteristics and flammability of fire retarding EPDM/layered double hydroxide (LDH) nanocomposites mehr
    RSC Advances 2 (2012) 3927-3933


  36. Mousa, A.; Heinrich, G.; Gohs, U.; Wagenknecht, U.
    Mechanical properties of electron beam treated carboxylated nitrile butadiene rubber (XNBR) composites reinforced by organic/inorganic hybrid filler mehr
    Journal of Composite Materials 46 (2012) 1151-1157


  37. Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    In-situ modification of unmodified montmorillonite in polypropylene by electron-induced reactive processing mehr
    Macromolecular Chemistry and Physics 213 (2012) 729-737


  38. Khonakdar, H. A.; Golriz, M.; Jafari, S.H.; Abedini, H.; Wagenknecht, U.; Heinrich, G.
    A study on transreactions of PET/PEN reactive blending in a twin-screw extruder using axial dispersion model mehr
    Macromolecular Theory and Simulations 21 (2012) 340-349


  39. Manhique, A.; Focke, W. W.; Leuteritz, A.; Madivate, C.
    Layered double hydroxides as nano additives in poly(e-caprolactone) mehr
    Molecular Crystals and Liquid Crystals 556 (2012) 114-123


  40. Mahmood, N.; Khan, Asad Ullah; Ali, Z.; Khan, M. Sohail; Haq, A. U.; Stöckelhuber, K.W.; Gohs, U.; Heinrich, G.
    Preparation and characterization of thermoplastic polyurethane–urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites mehr
    Journal of Applied Polymer Science 123 (2012) 3635-3643


  41. Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Electron-induced reactive processing of thermoplastic vulcanizate based on polypropylene and ethylene propylene diene terpolymer rubber mehr
    Polymer Journal 44 (2012) 439-448


  42. Leuteritz, A.; Kutlu, B.; Meinl, J.; Wang, De-Yi; Das, A.; Wagenknecht, U.; Heinrich, G.
    Layered double hydroxides (LDH): a multifunctional versatile system for nanocomposites mehr
    Molecular Crystals and Liquid Crystals 556 (2012) 107-113


  43. Schmidt, T.; Hoburg, A. T.; Broziat, C.; Smith, M.; Gohs, U.; Pruss, A.; Scheffler, S.
    Sterilization with electron beam irradiation influences the biomechanical properties and the early remodelling of tendon allografts for reconstruction of the anterior cruciate ligament (ACL) mehr
    Cell and Tissue Banking 13 (2012) 387-400


  44. Schmidt, T.; Hoburg, A. T.; Gohs, U.; Schumann, W.; Sim-Brandenburg, J. W.; Nitsche, A.; Scheffler, S.; Pruss, A.
    The inactivation effect of standard and fractionated electron beam irradIation on enveloped and non-enveloped viruses in a tendon transplant model mehr
    Transfusion Medicine and Hemotherapy 39 (2012) 29-35


  45. Mousa, A.; Heinrich, G.; Kretzschmar, B.; Wagenknecht, U.; Das, A.
    Utilization of agrowaste polymers in PVC/NBR alloys: tensile, thermal, and morphological properties mehr
    International Journal of Chemical Engineering 2012 (2012) Article ID 121496, 5 pages


  46. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of 'dry liquids' for post-processing crosslinking reactions mehr
    e-Polymers no. 023 (2012) 9 Seiten, http://www.e-polymers.org


  47. Das, A.; George, J. J.; Kutlu, B.; Leuteritz, A.; Wang, De-Yi; Rooj, S.; Jurk, R.; Rajeshbabu, R.; Stöckelhuber, K.W.; Galiatsatos, V.; Heinrich, G.
    A novel thermotropic elastomer based on highly-filled LDH-SSB composites mehr
    Macromolecular Rapid Communications 33 (2012) 337-342


  48. Engelmann, G.; Gohs, U.; Ganster, J.
    Monomer cast polyamide 6 composites and their treatment with high-energy electrons mehr
    Journal of Applied Polymer Science 123 (2012) 1201-1211


  49. Jafari, S.H.; Kalati-vahid, A.; Khonakdar, H. A.; Asadinezhad, A.; Wagenknecht, U.; Jehnichen, D.
    Crystallization and melting behavior of nanoclay-containing polypropylene/poly(trimethylene terephthalate) blends mehr
    eXPRESS Polymer Letters 6 (2012) 148-158


  50. Rajeshbabu, R.; Naskar, K.; Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Preparation of polypropylene (PP) / ethylene octene copolymer (EOC) thermoplastic vulcanizates (TPVs) by electron induced reactive processing mehr
    Radiation Physics and Chemistry 80 (2011) 1398-1405


  51. Mohammadi, S. R.; Khonakdar, H. A.; Ehsani, M.; Jafari, S.H.; Wagenknecht, U.; Kretzschmar, B.
    Investigation of thermal behavior and decomposition kinetic of PET/PEN blends and their clay containing nanocomposites mehr
    Journal of Polymer Research 18 (2011) 1765-1775


  52. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Rubber-wood composites from chemically modified olive husk powder and carboxylated nitrile butadiene rubber: cure characteristics, tensile behavior, and morphological studies mehr
    Journal of Wood Chemistry and Technology 32 (2011) 82-92


  53. Le, H. H.; Schoß, M.; Ilisch, S.; Gohs, U.; Heinrich, G.; Pham, T.; Radusch, H. J.
    CB filled EOC/EPDM blends as a shape-memory material: Manufacturing, morphology, and electrical properties mehr
    Polymer 52 (2011) 5858-5866


  54. Menzer, K.; Krause, B.; Boldt, R.; Kretzschmar, B.; Weidisch, R.; Pötschke, P.
    Percolation behaviour of multiwalled carbon nanotubes of altered length and primary agglomerate morphology in melt mixed isotactic polypropylene-based composites mehr
    Composites Science and Technology 71 (2011) 1936-1943


  55. Entezam, M.; Khonakdar, H. A.; Yousefi, A. A.; Jafari, S.H.; Wagenknecht, U.; Heinrich, G.; Kretzschmar, B.
    Influence of interfacial activity and micelle formation on rheological behavior and microstructure of reactively compatibilized PP/PET blends mehr
    Macromolecular Materials and Engineering 297 (2011) 312–328


  56. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Cure characteristics and mechanical properties of carboxylated nitrile butadiene rubber (XNBR) vulcanizate reinforced by organic filler mehr
    Polymer-Plastics Technology and Engineering 50 (2011) 1388-1392


  57. Müller, M.; Krause, B.; Kretzschmar, B.; Pötschke, P.
    Influence of feeding conditions in twin-screw extrusion of PP/MWCNT composites on electrical and mechanical properties mehr
    Composites Science and Technology 71 (2011) 1535-1542


  58. Hoburg, A. T.; Keshlaf, S.; Schmidt, T.; Smith, M.; Gohs, U.; Perka, C.; Pruss, A.; Scheffler, S.
    Fractionation of high-dose electron beam irradiation of BPTB grafts provides significantly improved viscoelastic and structural properties compared to standard gamma irradiation mehr
    Knee surgery, sports traumatology, arthroscopy 19 (2011) 1955-1961


  59. Gramm, S.; Teichmann, J.; Nitschke, M.; Gohs, U.; Eichhorn, K.-J.; Werner, C.
    Electron beam immobilization of functionalized poly(vinyl methyl ether) thin films on polymer surfaces - Towards stimuli responsive coatings for biomedical purposes mehr
    eXPRESS Polymer Letters 5 (2011) 970-976


  60. Fischer, D.; Müller, J.; Kummer, S.; Kretzschmar, B.
    Real time monitoring of morphologic and mechanical properties of polymer nanocomposites during extrusion by near infrared and ultrasonic spectroscopy mehr
    Macromolecular Symposia 305 (2011) 20-27


  61. Lappan, U.; Geißler, U.; Gohs, U.
    Radiation-induced graft copolymerization of styrene into tetrafluoroethylene-hexafluoropropylene-vinylidene fluoride (THV) terpolymer films mehr
    Macromolecular Materials and Engineering 296 (2011) 843-849


  62. Gohs, U.; Leuteritz, A.; Naskar, K.; Volke, S.; Wießner, S.; Heinrich, G.
    Reactive EB processing of polymer compounds mehr
    Macromolecular Symposia 296 (2011) 589-595


  63. Vyalikh, A.; Wang, De-Yi; Wagenknecht, U.; Heinrich, G.; Scheler, U.
    Molecular dynamics in aluminum layered double hydroxides as studied by 1H T1p NMR measurements mehr
    Chemical Physics Letters 509 (2011) 138-142


  64. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Heinrich, G.; Werner, C.
    Hollow fibers made from a poly(3-hydroxybutyrate)/poly-e-caprolactone blend mehr
    eXPRESS Polymer Letters 5 (2011) 643-652


  65. Das, A.; Wang, De-Yi; Leuteritz, A.; Subramaniam, K.; Greenwell, H. C.; Wagenknecht, U.; Heinrich, G.
    Preparation of zinc oxide free, transparent rubber nanocomposites using a layered double hydroxide filler mehr
    Journal of Materials Chemistry 21 (2011) 7194-7200


  66. Wagenknecht, U.; Gohs, U.; Leuteritz, A.; Volke, S.; Wießner, S.; Heinrich, G.
    Modification of particle filled polymers with high energy electrons under in-stationary conditions of melt mixing mehr
    Macromolecular Symposia 301 (2011) 146-150


  67. Costa, F. R.; Leuteritz, A.; Meinl, J.; Wagenknecht, U.; Heinrich, G.
    LDH as nanofiller: Organic modification and dispersion in polymers mehr
    Macromolecular Symposia 301 (2011) 46-54


  68. Gedan-Smolka, M.; Müller, A.; Gohs, U.; Calvimontes, A.
    Electron pretreatment of sheet molding compounds (SMC) mehr
    Progress in Organic Coatings (2011) 159-167


  69. Sablong, R.; Duchateau, R.; Koning, Cor E.; Pospiech, D.; Korwitz, A.; Komber, H.; Starke, S.; Häußler, L.; Jehnichen, D.; Auf der Landwehr, M.
    Incorporation of a flame retardancy enhancing phosphorus-containing diol into poly(butylene terephthalate) via solid state polycondensation: A comparative study mehr
    Polymer Degradation and Stability 96 (2011) 334-341


  70. Wang, De-Yi; Leuteritz, A.; Kutlu, B.; Auf der Landwehr, M.; Jehnichen, D.; Wagenknecht, U.; Heinrich, G.
    Preparation and investigation of the combustion behavior of polypropylene/organomodified MgAl-LDH micro-nanocomposite mehr
    Journal of Alloys and Compounds 509 (2011) 3497-3501


  71. Rooj, S.; Thakur, V.; Gohs, U.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    In situ reactive compatibilization of polypropylene/epoxidized natural rubber blends electron induced reactive processing: novel in-line mixing technology mehr
    Polymers for Advanced Technologies 22 (2011) 2257-2263


  72. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Thermoplastic composites based on renewable natural resources: Unplasticized PVC/Olive Husk mehr
    International Journal of Polymeric Materials 59 (2010) 843-853


  73. Wang, De-Yi; Costa, F. R.; Leuteritz, A.; Schönhals, A.; Vyalikh, A.; Scheler, U.; Wagenknecht, U.; Kutlu, B.; Heinrich, G.
    Polyolefin nanocomposites with layered double hydroxides mehr
    in: Advances in polyolefin nanocomposites, Vikas Mittal, ed. (CRC Press 2010) , 225-245


  74. Sritragool, K.; Michael, H.; Gehde, M.; Gohs, U.; Heinrich, G.
    Polypropylene/rubber particle blends by electron induced reactive processing mehr
    Kautschuk Gummi Kunststoffe 63 (2010) 554-558


  75. Wang, De-Yi; Leuteritz, A.; Wang, Yu-Zhong; Wagenknecht, U.; Heinrich, G.
    Preparation and burning behaviors of flame retarding biodegradable poly (latic acid) nanocomposite based on zinc aluminum layered double hydroxide mehr
    Polymer Degradation and Stability 95 (2010) 2474-2480


  76. Thakur, V.; Leuteritz, A.; Gohs, U.; Kretzschmar, B.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    Montmorillonite nanocomposites with electron-beam modified atactic polypropylene mehr
    Applied Clay Science 49 (2010) 200-204


  77. Hoburg, A. T.; Keshlaf, S.; Schmidt, T.; Smith, M.; Gohs, U.; Perka, C.; Pruss, A.; Scheffler, S.
    Effect of electron beam irradiation on biomechanical properties of patellar tendon allografts in anterior cruciate ligament reconstruction mehr
    The American Journal of Sports Medicine 38 (2010) 1134-1140


  78. Handge, U.A.; Altstädt, V.; Hedicke-Höchstötter, K.; Pospiech, D.; Jehnichen, D.; Kretzschmar, B.
    Surface functionalization of halloysite nanotubes for polyamide 6 composites mehr
    Zeitschrift Kunststofftechnik = Journal of plastics technology : archivierte, rezensierte Internetzeitschrift des Wissenschaftlichen Arbeitskreises Kunstofftechnik (WAK) 6 (2010) 316-337


  79. Wang, De-Yi; Das, A.; Costa, F. R.; Leuteritz, A.; Wang, Yu-Zhong; Wagenknecht, U.; Heinrich, G.
    Synthesis of organo Co-Al layered double hydroxide via a novel single step self-assembling method and its use as flame retardant nanofiller in PP mehr
    Langmuir 26 (2010) 14162-14169


  80. Heinrich, G.; Gohs, U.; Stöckelhuber, K.W.
    Leibniz Applikationslabor Multifunktionelle Polymerwerkstoffe mehr
    Dresdner Transferbrief 3.10 (2010) 15


  81. Sritragool, K.; Michael, H.; Gehde, M.; Gohs, U.; Heinrich, G.
    PP/rubber particle blends by high energy electron treatment under stationary condition mehr
    Kautschuk Gummi Kunststoffe 63 (2010) 377-382


  82. Costa, F. R.; Pradhan, S.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    XNBR/LDH nanocomposites: Effect of vulcanization and organic modifier mehr
    Journal of Polymer Science: Part B: Polymer Physics 48 (2010) 2302-2311


  83. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Werner, C.
    Hollow poly(3-hydroxybutyrate) fibers produced by melt spinning mehr
    Macromolecular Materials and Engineering 295 (2010) 585-594


  84. Villmow, T.; Kretzschmar, B.; Pötschke, P.
    Influence of screw configuration, residence time, and specific mechanical energy in twin-screw extrusion of polycaprolactone/multi-walled carbon nanotube composites mehr
    Composites Science and Technology 70 (2010) 2045-2055


  85. Lappan, U.; Geißler, U.; Gohs, U.; Uhlmann, St.
    Grafting of styrene into pre-irradiated fluoropolymer films: Influence of base material and irradiation temperature mehr
    Radiation Physics and Chemistry 79 (2010) 1067-1072


  86. Schuricht, W.; Leuteritz, A.
    Entwicklungsanforderungen an die Rohrhersteller mehr
    EuroHeat & Power Deutschland 39 (2010) 38-41


  87. Wang, De-Yi; Leuteritz, A.; Boldt, R.; Häußler, L.; Wagenknecht, U.; Heinrich, G.
    Thermal degradation behaviors of nanocomposite based on Polypropylene and Co-Al layered double hydroxide mehr
    Polymer Degradation and Stability 95 (2010) 285-290


  88. Hoffmann, T.; Pospiech, D.; Häußler, L.; Sahre, K.; Komber, H.; Harnisch, C.; Auf der Landwehr, M.; Schäfer, A.; Döring, M.
    Phosphorus-containing polysulfones - a comparative study mehr
    High Performance Polymers 22 (2010) 715-741


  89. Wurm, A.; Ismail, M.; Kretzschmar, B.; Pospiech, D.; Schick, C.
    Retarded crystallization in polyamide/layered silicates nanocomposites caused by an immobilized interphase mehr
    Macromolecules 43 (2010) 1480-1487


  90. Wang, De-Yi; Costa, F. R.; Vyalikh, A.; Leuteritz, A.; Scheler, U.; Jehnichen, D.; Wagenknecht, U.; Häußler, L.; Heinrich, G.
    One-step synthesis of organic LDH and its comparison with regeneration and anion exchange method mehr
    Chemistry of Materials 21 (2010) 4490-4497


  91. Rentsch, C.; Rentsch, B.; Breier, A.; Hofmann, A.; Manthey, S.; Scharnweber, D.; Biewener, A.; Zwipp, H.
    Evaluation of the osteogenic potential and vascularization of 3D poly(3)hydroxybutyrate scaffolds subcutaneously implanted in nude rats mehr
    Journal of Biomedical Materials Research Part A 92A (2010) 185-195


  92. Pötschke, P.; Andres, T.; Villmow, T.; Pegel, S.; Brünig, H.; Kobashi, K.; Fischer, D.; Häußler, L.
    Liquid sensing properties of fibres prepared by melt spinning from poly(lactic acid) containing multi-walled carbon nanotubes mehr
    Composites Science and Technology 70 (2010) 343-349


  93. Vyalikh, A.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.; Massiot, D.; Scheler, U.
    From layered double hydroxides to layered double hydroxide-based nanocomposites - A solid-state NMR study mehr
    Journal of Physical Chemistry / C 113 (2009) 21308-21313


  94. Heinrich, G.; Breier, A.; Hinüber, C.
    Bioabbaubare Polymere in textiler Form für die regenerative Medizin mehr
    Dresdner Transferbrief 17 (2009) 12


  95. Larsen, C. Ting; Togeskov, P.; Leuteritz, A.
    Alterung von Kunststoffmantelrohren Diffusion der Zellgase durch polyethylen mehr
    EuroHeat & Power Deutschland 38 (2009) 36-41


  96. Wang, De-Yi; Leuteritz, A.; Wagenknecht, U.; Heinrich, G.
    Self-assembling organomodified Co/Al based layered double hydroxides (LDH) via one-step route mehr
    Transactions of Nonferrous Metals Society of China 19 (2009) 1479-1482


  97. Naskar, K.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    PP-EPDM thermoplastic vulcanisates (TPVs) by electron induced reactive processing mehr
    eXPRESS Polymer Letters 3 (2009) 677-683


  98. Rentsch, B.; Rentsch, C.; Breier, A.; Hofmann, A.; Scharnweber, D.
    Embroidered and surface modified polycaprolactone-co-lactide scaffolds as bone substitute - in vitro characterization mehr
    Annals of Biomedical Engineering 37 (2009) 2118-2128


  99. Larsen, C. Ting; Togeskov, P.; Leuteritz, A.
    Extending the service life of pre-insulated pipes: Analyses of diffusion rates through PE and impact on ageing mehr
    EuroHeat & Power International 6 (2009) 48-53


  100. Thakur, V.; Das, A.; Mahaling, R. N.; Rooj, S.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Influence of layered double hydroxides on the curing of carboxylated nitrile rubber with zinc oxide mehr
    Macromolecular Materials and Engineering 294 (2009) 561-569


  101. Mousa, A.; Heinrich, G.; Gohs, U.; Häßler, R.; Wagenknecht, U.
    Application of renewable agro-waste-based olive pomace on the mechanical and thermal performance of toughened PVC mehr
    Polymer-Plastics Technology and Engineering 48 (2009) 1030-1040


  102. Burkert, S.; Gohs, U.; Uhlmann, P.; Stamm, M.
    Tuning of biocompatible thermo-sensitive polymer brushes by e-beam irradiation mehr
    Polymeric Materials: Science and Engineering 101 (2009) 1162


  103. Lappan, U.; Geißler, U.; Gohs, U.; Uhlmann, St.
    Influence of irradiation temperature on grafting of styrene into poly(tetrafluoroethylene-co-hexafluoropropylene) films mehr
    Macromolecular Materials and Engineering 294 (2009) 510-515


  104. Focke, W. W.; Joseph, S.; Grimbeek, J.; Summers, G. J.; Kretzschmar, B.
    Mechanical properties of ternary blends of ABS + HIPS + PETG mehr
    Polymer-Plastics Technology and Engineering 48 (2009) 814-820


  105. Schönhals, A.; Goering, H.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Dielectric properties of nanocomposites based on polyethylene and layered double hydroxide mehr
    Macromolecules 42 (2009) 4165-4174


  106. Cherif, C.; Rödel, H.; Hoffmann, G.; Diestel, O.; Herzberg, C.; Paul, C.; Schulz, C.; Großmann, K.; Mühl, A.; Mäder, E.; Brünig, H.
    Textile Technologien für hybridgarnbasierte komplexe Preformstrukturen mehr
    Zeitschrift Kunststofftechnik : Journal of plastics technology / Wissenschaftlicher Arbeitskreis der Universitäts-Professoren der Kunststofftechnik 6 (2009) 103-129


  107. Costa, F. R.; Leuteritz, A.; Wagenknecht, U.; Auf der Landwehr, M.; Jehnichen, D.; Häußler, L.; Heinrich, G.
    Alkyl sulfonate modified LDH: effect of alkyl chain length on intercalation behavior, particle morphology and thermal stability mehr
    Applied Clay Science 44 (2009) 7-14


  108. Khonakdar, H. A.; Golriz, M.; Jafari, S.H.; Wagenknecht, U.
    Correlation of sequence block lengths and degree of randomness with melt rheological properties in PET/PEN blends mehr
    Macromolecular Materials and Engineering 294 (2009) 272-280


  109. Pötschke, P.; Villmow, T.; Andres, T.; Kobashi, K.; Rentenberger, R.; Brünig, H.; Fischer, D.; Häußler, L.
    Melt processed polymer - carbon nanotube composites as materials for liquid sensing applications mehr
    Polymer Preprints 50 (2009) 419-420


  110. Gehde, M.; Gohs, U.; Heinrich, G.; Michael, K.; Sritragool, K.; Wagenknecht, U.; Wießner, S.
    Modifizierung von Gummipartikel/Thermoplastmischungen mit energiereichen Elektronen mehr
    GAK : Gummi Fasern Kunststoffe 62 (2009) 88-93


  111. Kalaivani, S.; Vijayabaskar, V.; Thunga, M.; Stephan, M.; Dorschner, H.; Heinrich, G.; Bhowmick, A. K.; Wagenknecht, U.
    Effect of irradiation temperatures on nitrile rubber nanocomposites mehr
    Plastics, Rubber and Composites 38 (2009) 39-45


  112. Khan, M. Sohail; Lehmann, D.; Heinrich, G.; Gohs, U.; Franke, R.
    Structure-property effects on mechanical, friction and wear properties of electron modified PTFE filled EPDM composite mehr
    eXPRESS Polymer Letters 3 (2009) 39-48


  113. Khan, M. Sohail; Franke, R.; Gohs, U.; Lehmann, D.; Heinrich, G.
    Friction and wear behaviour of electron beam modified PTFE filled EPDM compounds mehr
    Wear 266 (2009) 175-183


  114. Hasan, M. M. B.; Dutschk, V.; Brünig, H.; Mäder, E.; Häußler, L.; Häßler, R.; Cherif, C.; Heinrich, G.
    Comparison of tensile, thermal, anf thermo-mechanical properties of polyester filaments having different cross-sectional shape mehr
    Journal of Applied Polymer Science 111 (2008) 805-812


  115. Das, A.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Nanocomposites based on chloroprene rubber: Effect of chemical nature and organic modification of nanoclay on the vulcanizate properties mehr
    European Polymer Journal 44 (2008) 3456-3465


  116. Pospiech, D.; Jehnichen, D.; Komber, H.; Korwitz, A.; Janke, A.; Hoffmann, T.; Kretzschmar, B.; Reuter, U.; Döring, M.; Seibold, S.; Perez Graterol, R.; Sandler, J.; Altstädt, V.; Bellucci, F.; Camino, G.
    New polymers for tailor-made nanocomposites mehr
    Journal of Nanostructured Polymers and Nanocomposites 4 (2008) 62-75


  117. Bräuer, M.; Tändler, B.; Komber, H.; Pompe, G.; Bellmann, C.; Brünig, H.; Hess, C.
    Beiträge zum Reaktionsmechanismus des Elastanfaserschmelzspinnens nach dem Vernetzerverfahren mehr
    Kautschuk Gummi Kunststoffe 61 (2008) 531-539


  118. Wagenknecht, U.; Kretzschmar, B.; Pötschke, P.; Costa, F. R.; Pegel, S.; Stöckelhuber, K.W.; Heinrich, G.
    Polymere Nanokomposite mit anorganischen Funktionsfüllstoffen mehr
    Chemie Ingenieur Technik 80 (2008) 1683-1699


  119. Pradhan, S.; Costa, F. R.; Jehnichen, D.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    Elastomer/LDH nanocomposites: Synthesis and studies on nanoparticle dispersion, interfacial properties and interfacial adhesion mehr
    European Polymer Journal 44 (2008) 3122-3132


  120. Reichelt, S.; Eichhorn, K.-J.; Gohs, U.; Simon, F.; Fleischmann, S.; Voit, B.
    Immobilization of a hyperbranched polyester via grafting-to and electron beam irradiation mehr
    Langmuir 24 (2008) 9392-9400


  121. Blechschmidt, D.; Lindner, R.; Erth, H.; Brünig, H.
    Spunbonded nonwovens made from polyactides for technical applications mehr
    Chemical Fibers International 58 (2008) 190-193


  122. Burns, M.; Wagenknecht, U.; Kretzschmar, B.; Focke, W. W.
    Effect of hydrated fillers and red phosphorus on the limiting oxygen index of poly(ethylene-co-vinyl actate)-poly(vinyl butyral) and low density polyethylene-poly(ethylene-co-vinyl alcohol) blends mehr
    Journal of Vinyl and Additive Technology 14 (2008) 113-119


  123. Schulze, U.; Sen Majumder, P.; Heinrich, G.; Stephan, M.; Gohs, U.
    Electron beam crosslinking of atactic polypropylene: Development of a potential novel elastomer mehr
    Macromolecular Materials and Engineering 293 (2008) 692-699


  124. Villmow, T.; Pötschke, P.; Pegel, S.; Häußler, L.; Kretzschmar, B.
    Influence of twin-screw extrusion conditions on the dispersion of multi-walled carbon nanotubes in a poly(lactic acid) matrix mehr
    Polymer 49 (2008) 3500-3509


  125. Wagenknecht, U.; Costa, F. R.; Heinrich, G.; Reinemann, S.
    Layered double hydroxides (LDH) - an environmentally friendly, nano scale flame retardant mehr
    Rubber, fibres, plastics international : RFP (2008) 206-209


  126. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    The potential of O-MMT as a reinforcing filler for uncured and dynamically cured PVC/XNBR composites mehr
    Journal of Macromolecular Science - A: Pure Applied Chemistry 45 (2008) 733-741


  127. Wagenknecht, U.; Costa, F. R.; Heinrich, G.; Reinemann, S.
    Layered double hydroxides (LDH) - ein umweltfreundlicher nanoskaliger Flammhemmer mehr
    GAK Gummi Fasern Kunststoffe 61 (2008) 369-372


  128. Grenzer, M.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Nonlinear behavior of polyethylene/layered double hydroxide nanocomposites under shear flow. - In kyrill. Schr. mehr
    Vysokomol. Soedinenija, Ser. A 50 (2008) 868-881


  129. Li, X.; Schneider, K.; Kretzschmar, B.; Stamm, M.
    Deformation behavior of PP and PP/ZnO Nanocomposites as studied by SAXS and WAXS mehr
    Macromolecules 41 (2008) 4371-4379


  130. Stephan, M.; Gohs, U.;Heinrich, G.; Volke, S.; Wagenknecht, U.
    Electron Treatment of Thermoplastics under Reactive Conditions mehr
    Proceedings of the Polymer Processing Society 24th Annual Meeting (2008) 3 Pages


  131. Gohs, U.; Heinrich, G.; Stephan, M.; Volke, S.; Wagenknecht, U.
    Electron Treatment of Polymer Melts under Static and Mixing Conditions mehr
    Proceedings of the Polymer Processing Society 24th Annual Meeting (2008) 3 Pages


  132. Bellucci, F.; Terenzi, A.; Pospiech, D.; Leuteritz, A.; Frache, A.; Traverso, G.; Camino, G.
    Intercalation degree in PP/organoclay nanocomposites: role of surfactant structure mehr
    Polymers for Advanced Technologies 19 (2008) 547-555


  133. Grenzer, M.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Nonlinear behavior of polyethylene/layered double hydroxide nanocomposites under shear flow mehr
    Polymer Science / Series A 50 (2008) 573-582


  134. Vogel, R.; Voigt, D.; Tändler, B.; Gohs, U.; Häußler, L.
    Melt spinning of poly(3-hydroxybutyrate) for tissue engineering using electron-beam irradiated poly(3-hydroxybutyrate) as nucleation agent mehr
    Macromolecular Bioscience 8 (2008) 426-431


  135. Albrecht, V.; Reinsch, E.; Gohs, U.; Schünemann, R.; Husemann, K.; Simon, F.
    Zur elektrostatischen Trennung von Polyolefingemischen mehr
    Aufbereitungstechnik 49 (2008) 26-34


  136. Slouf, M.; Synkova, H.; Baldrian, J.; Marek, A.; Kovarova, J.; Schmidt, P.; Stephan, M.; Dorschner, H.; Gohs, U.
    Structural changes of UHMWPE after e-beam irradiation and thermal treatment mehr
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 85 (2008) 240-251


  137. Villmow, T.; Pegel, S.; Pötschke, P.; Wagenknecht, U.
    Influence of injection molding parameters on the electrical resistivity of polycarbonate filled with multi-walled carbon nanotubes mehr
    Composites Science and Technology 68 (2008) 777-789


  138. Costa, F. R.; Leuteritz, A.; Wagenknecht, U.; Jehnichen, D.; Häußler, L.; Heinrich, G.
    Intercalation of Mg-Al based layered double hydroxide by anionic surfactants containing different functionalities using regeneration method mehr
    Applied Clay Science 38 (2008) 153-164


  139. Vijayabaskar, V.; Stephan, M.; Kalaivani, S.; Volke, S.; Heinrich, G.; Dorschner, H.; Bhowmick, A. K.; Wagenknecht, U.
    Influence of radiation temperature on the crosslinking of nitrile rubber by electron beam irradiation mehr
    Radiation Physics and Chemistry 77 (2008) 511-521


  140. Costa, F. R.; Grenzer, M.; Wagenknecht, U.; Heinrich, G.
    Layered double hydroxide based polymer nanocomposites mehr
    in: Wax Crystal Control - Nanocomposites Stimuli-Responsive Polymers, Series: Advances in Polymer Science, ed. (Springer 2008) 210, 101-168


  141. Khizhnyak, S.; Vorobjava, K. O.; Kudryashova, E. V.; Malanni, M. N.; Auf der Landwehr, M.; Eichhorn, K.-J.; Pakhomov, P.
    Study of polymer composites and blends by means of FTIR spectroscopy, New approach (In kyrill. Schrift) mehr
    Tver State University 13 (2007) 75-82


  142. Dutschk, V.; Myat, Su Su; Brünig, H.; Märtin, J.; Stolz, M.; Breitzke, B.; Cherif, C.; Heinrich, G.
    The influence of different ether carboxylic acids on polyester fibre friction mehr
    Tenside Surfactants Detergents 44 (2007) 270-273


  143. Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    LDPE/Mg-Al layered double hydroxide nanocomposite: Thermal and flammability properties mehr
    Polymer Degradation and Stability 92 (2007) 1813-1823


  144. Schwarz, S.; Jaeger, W.; Paulke, B.-R.; Bratskaya, S.; Smolka, N.; Bohrisch, J.
    Cationic Flocculants Carrying Hydrophobic Functionalities: Applications of solid/liquid separation mehr
    Journal of Physical Chemistry / B 111 (2007) 8649-8654


  145. Stephan, M.; Vijayabaskar, V.; Kalaivani, S.; Volke, S.; Heinrich, G.; Dorschner, H.; Wagenknecht, U.; Bhowmick, A. K.
    Crosslinking of nitrile rubber by electron beam irradiation at elevated temperatures mehr
    Kautschuk Gummi Kunststoffe 60 (2007) 542-547


  146. Pospiech, D.; Korwitz, A.; Komber, H.; Voigt, D.; Jehnichen, D.; Müller, J.; Janke, A.; Hoffmann, T.; Kretzschmar, B.
    In situ synthesis of poly(ethylene terephthalate)/layered silicate nanocomposites by polycondensation mehr
    High Performance Polymers 19 (2007) 565-580


  147. Gottlieb, R.; Kaiser, C.; Gohs, U.; Arndt, K.-F.
    Temperature sensitive hydrogels based on hydroxypropylcellulose by high energy irraduation mehr
    Macromolecular Symposia 254 (2007) 361-369


  148. Pospiech, D.; Kretzschmar, B.; Willeke, M.; Leuteritz, A.; Jehnichen, D.; Janke, A.; Omastová, M.
    Exfoliation behavior of Montmorillonite modified by poly(oxyalkylene)s on polypropylene and the properties of the resulting nanocomposites mehr
    Polymer Engineering and Science 47 (2007) 1262-1271


  149. Burkert, S.; Schmidt, T.; Gohs, U.; Mönch, I.; Arndt, K.-F.
    Patterning of thin poly(N-vinyl pyrrolidone) films on silicon substrates by electron beam lithography mehr
    Journal of Applied Polymer Science 106 (2007) 534-539


  150. Vogel, R.; Tändler, B.; Voigt, D.; Jehnichen, D.; Häußler, L.; Peitzsch, L.; Brünig, H.
    Melt spinning of bacterial aliphatic polyester using reactive extrusion for improvement of crystallization mehr
    Macromolecular Bioscience 7 (2007) 820-828


  151. Golzar, M.; Brünig, H.; Mäder, E.
    Commingled hybrid yarn diameter ratio in continuous fiber-reinforced thermoplastic composites mehr
    Journal of Thermoplastic Composite Materials 20 (2007) 17-26


  152. Leuteritz, A.; Kretzschmar, B.; Pospiech, D.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Industry-relevant preparation, characterization, and applications of polymer nanocomposites mehr
    in: Polymeric nanostructures and their applications : Vol. 2: Applications, Hari Singh Nalwa, ed. (American Scienctific Publishers 2007) 2, 99-151


  153. Pötschke, P.; Kretzschmar, B.; Janke, A.
    Use of carbon nanotube filled polycarbonate in blends with montmorillonite filled polypropylene mehr
    Composite Science and Technology 67 (2007) 855-860


  154. Khonakdar, H. A.; Jafari, S.H.; Haghighi Als, A.; Wagenknecht, U.; Häußler, L.; Reuter, U.
    Thermal and mechanical properties of uncrosslinked and chemically crosslinked polyethylene/ethylene vinyl acetate copolymer blends mehr
    Journal of Applied Polymer Science 103 (2007) 3261-3270


  155. Hoffmann, T.; Pospiech, D.; Kretzschmar, B.; Reuter, U.; Häußler, L.; Eckert, F.; Perez Graterol, R.; Sandler, J.; Altstädt, V.
    Modification of polysulfones by carboxylic acids mehr
    High Performance Polymers 19 (2007) 48-61


  156. Mäder, E.; Rothe, C.; Brünig, H.; Leopold, T.
    Online spinning of commingled yarns - equipment and yarn modification by tailored fibre surfaces mehr
    Key Engineering Materials 334-335 (2007) 229-232


  157. Mrozik, B.; Hoffmann, G.; Cherif, C.; Walter, A.; Gelinsky, M.; Pompe, W.; Brünig, H.
    Neuartige textile Scaffolds für das Tissue Engineering / Novel textile scaffolds for tissue engineering mehr
    Technische Textilien/Technical Textiles 49 (2006) 198-199 / E150-E151


  158. Wagenknecht, U.; Wiessner, S.; Heinrich, G.; Michael, H.; Zichner, M.
    Effects of interface reactions in compatibilised ground tyre rubber polypropylene elastomic alloys mehr
    Plastics, Rubber and Composites 35 (2006) 393-400


  159. Beyreuther, R.; Brünig, H.
    Modelling and Application in Fibre and Textile Industry mehr
    Springer (2006) 365 : Ill., graph. Darst.


  160. Kelnar, I.; Scudla, J.; Kotek, J.; Kretzschmar, B.; Leuteritz, A.
    J-integral evaluation of PA6 nanocomposite with improved toughness mehr
    Polymer Testing 25 (2006) 697-700


  161. Costa, F. R.; Wagenknecht, U.; Jehnichen, D.; Heinrich, G.
    Nanocomposites based on polyethylene and Mg-Al layered double hydroxide: characterization of modified clay, morphological and rheological analysis of the nanocomposites mehr
    Plastics, Rubber and Composites 35 (2006) 139-148


  162. Costa, F. R.; Satapathy, B.K.; Wagenknecht, U.; Weidisch, R.; Heinrich, G.
    Morphology and fracture behaviour of polyethylene/Mg-Al layered double hydroxide (LDH) nanocomposites mehr
    European Polymer Journal 42 (2006) 2140-2152


  163. Vogel, R.; Tändler, B.; Häußler, L.; Jehnichen, D.; Brünig, H.
    Melt Spinning of Poly(3-hydroxybutyrate) Fibers for Tissue Engineering using a-Cyclodextrin/Polymer Inclusion Complexes as Nucleation Agent mehr
    Macromolecular Bioscience 6 (2006) 730-736


  164. Khonakdar, H. A.; Jafari, S.H.; Taheri, M.; Wagenknecht, U.; Jehnichen, D.; Häußler, L.
    Thermal and Wide Angle X-ray Analysis of Chemically and Radiation-Crosslinked Low and High Density Polethylene mehr
    Journal of Applied Polymer Science 100 (2006) 3264-3271


  165. Costa, F. R.; Wagenknecht, U.; Jehnichen, D.; Abdel-Goad, M.; Heinrich, G.
    Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. Part II. Rheological characterization mehr
    Polymer 47 (2006) 1649-1660


  166. Gahleitner, M.; Kretzschmar, B.; Van Vliet, G.; Devaux, J.; Pospiech, D.; Bernreitner, K.; Ingolic, E.
    Rheology/Morphology Interactions in Polypropylene/Polyamide-6 Nanocomposites mehr
    Rheologica Acta 45 (2006) 322-330


  167. Vogel, R.; Brünig, H.; Häußler, L.; Hatzikiriakos, S.G.
    Influence of Processing Aids on the Uniaxial Extensinal Behavior of Metallocene Polyethylenes mehr
    Polymer Engineering and Science 46 (2006) 735-742


  168. Messerschmidt, M.; Leuteritz, A.; Fleischmann, S.; Voit, B.
    Adjustable nanostructure in thin films of p-hydroxy-styrene polymers prepared by controlled radical polymerization mehr
    Polymer Preprints 47 (2006) 506


  169. Khonakdar, H. A.; Jafari, S.H.; Wagenknecht, U.; Jehnichen, D.
    Effect of electron-irradiation on cross-link density and crystalline structure of low- and high-density polyethylene mehr
    Radiation Physics and Chemistry 75 (2006) 78-86


  170. Gahleitner, M.; Kretzschmar, B.; Pospiech, D.; Ingolic, E.; Reichelt, N.; Bernreitner, K.
    Morphology and Mechanical Properties of Polypropylene/Polyamide 6 Nanocomposites Prepared by a Two-Step Melt-Compounding Process mehr
    Journal of Applied Polymer Science 100 (2006) 283-291


  171. Pötschke, P.; Brünig, H.; Janke, A.; Fischer, D.; Jehnichen, D.
    Orientation of multiwalled carbon nanotubes in composites with polycarbonate by melt spinning mehr
    Polymer 46 (2005) 10355-10363


  172. Gliesche, K.; Breier, A.; Schmack, G.
    Herstellung textiler Scaffolds mittels Sticktechnik mehr
    Biomaterialien 6 (2005) 155-159


  173. Costa, F. R.; Abdel-Goad, M.; Wagenknecht, U.; Heinrich, G.
    Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. I. Synthesis and characterization mehr
    Polymer 46 (2005) 4447-4453


  174. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Willeke, M.; Jehnichen, D.; Jentzsch, U.; Grundke, K.; Janke, A.
    Properties of Polypropylene Clay Nanocomposites modified with difunctional compounds mehr
    Composite Interfaces 12 (2005) 231-242


  175. Fahmi, A.; Brünig, H.; Weidisch, R.; Stamm, M.
    Organization of Designed Nanofibres Assembled in Filament via Flow Alignment mehr
    Macromolecular Materials and Engineering 290 (2005) 136-142


  176. Heinrich, G.; Costa, F. R.; Abdel-Goad, M.; Wagenknecht, U.; Lauke, B.; Härtel, V.; Tschimmel, J.; Klüppel, M.; Sviskov, A.L.
    Structural Kinetics in Filled Elastomers and PE/LDH Composites mehr
    Kautschuk Gummi Kunststoffe 58 (2005) 163-167


  177. Khonakdar, H. A.; Jafari, S.H.; Yavari, A.; Asadinezhad, A.; Wagenknecht, U.
    Rheology, morphology and estimation of interfacial tension of LDPE/EVA and HDPE/EVA blends mehr
    Polymer Bulletin 54 (2005) 75-84


  178. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Willeke, M.; Jehnichen, D.; Jentzsch, U.; Grundke, K.; Janke, A.
    Polypropylene-Clay Nanocomposites: Comparison of Different Layered Silicates mehr
    Macromolecular Symposia 221 (2005) 53-61


  179. Wagenknecht, U.; Steglich, S.; Wiessner, S.; Michael, H.
    Rubber Powder - A Perspective Filler of Thermoplastics mehr
    Macromolecular Symposia 221 (2005) 237-245


  180. Fischer, D.; Pötschke, P.; Brünig, H.; Janke, A.
    Investigation of the Orientation in Composite Fibers of Polycarbonate with Multiwalled Carbon Nanotubes by Raman Microscopy mehr
    Macromolecular Symposia 230 (2005) 167-172


  181. Golzar, M.; Beyreuther, R.; Brünig, H.; Tändler, B.; Vogel, R.
    Online Temperature Measurement and Simultaneous Diameter Estimation of Fibres by Thermography of the Spinnline in the Melt Spinning Process mehr
    Advances in Polymer Technology 23 (2004) 176-185


  182. Khonakdar, H. A.; Wagenknecht, U.; Jafari, S.H.; Häßler, R.; Eslami, H.
    Dynamic Mechanical Properties and Morphology of Polyethylene/Ethylene Vinyl Acetate Copolymer Blends mehr
    Advances in Polymer Technology 23 (2004) 304-315


  183. Pospiech, D.; Kretzschmar, B.; Leuteritz, A.; Willeke, M.; Jehnichen, D.; Janke, A.; Grundke, K.
    Nanocomposites mit natürlichen Schichtsilikaten mehr
    Wissenschaftliche Beiträge der Fachhochschule Lausitz III (2004)


  184. Petzold, G.; Geißler, U.; Smolka, N.; Schwarz, S.
    Influence of humic acid on the flocculation of clay mehr
    Colloid and Polymer Science 282 (2004) 670-676


  185. Khonakdar, H. A.; Morshedian, J.; Wagenknecht, U.; Jafari, S.H.
    An investigation of chemical crosslinking effect on properties of high-density polyethylene mehr
    Polymer 44 (2003) 4301-4309


  186. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Willeke, M.; Jehnichen, D.; Jentzsch, U.; Grundke, K.; Janke, A.
    Progress in Polypropylene-Nanocomposite Development mehr
    Advanced Engineering Materials 5 (2003) 678-681


  187. Khonakdar, H. A.; Morshedian, J.; Mehrabzadeh, M.; Wagenknecht, U.; Jafari, S.H.
    Thermal and shrinkage Behaviour of stretched peroxide-crosslinked high-density polyethylene mehr
    European Polymer Journal 39 (2003) 1729-1734


  188. Vogel, R.; Hatzikiriakos, S.G.; Brünig, H.; Tändler, B.; Golzar, M.
    Improved Spinnability of Metallocene Polyethylenes by Using Processing Aids mehr
    International Polymer Processing 18 (2003) 67-73


  189. Brünig, H.; Tändler, B.
    A new Method to Determine the Filament Force Tension within the Fibre Formation Zone mehr
    International Polymer Processing 18 (2003) 41-45


  190. Brünig, H.; Beyreuther, R.; Vogel, R.; Tändler, B.
    Melt spinning of fine and ultra-fine PEEK-filaments mehr
    Journal of Materials Science 38 (2003) 2149-2153


  191. Wagenknecht, U.; Kretzschmar, B.; Reinhardt, G.
    Investigations of Fire Retardant Properties of Polypropylene-Clay-Nanocomposites mehr
    Macromolecular Symposia 194 (2003) 207-212


  192. Jenschke, W.; Dorschner, H.; Arnold, D.; Stephan, M.; Brünig, H.
    Schnell - Heizapparatur für die strahlenchemische Modifizierung von Polymerfolien im Schmelzezustand mehr
    Technisches Messen 70 (2003) 323-328


  193. Pospiech, D.; Jehnichen, D.; Kretzschmar, B.; Leuteritz, A.; Grundke, K.; Janke, A.
    Investigation of the Exfoliation Process in Polypropylene Nanocomposites mehr
    Macromolecular Chemistry and Physics 204 (2003) F48-F50


  194. Kravtsov, A.; Brünig, H.; Zotov, S.V.
    Analysis of the polarization state of melt-spun polypropylene fibers mehr
    Journal of Materials Processing Technology 124 (2002) 160-165


  195. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Jehnichen, D.; Heger, K.; Jentzsch, U.; Wagenknecht, U.
    Design of interface in polypropylene-clay nanocomposites mehr
    Polymeric Materials: Science and Engineering 87 (2002) 297-299


  196. Leuteritz, A.; Messerschmidt, M.; Voit, B.; Yin, M.; Krause, T.; Habicher, W.D.
    Synthesis of orthogonally protected narrowly distributed block copolymers of hydroxystyrene mehr
    Polymer Preprints 43 (2002) 283-284


  197. Beyreuther, R.; Brünig, H.; Vogel, R.
    Preferable Filament Diameter Ratios of Hybrid Yarn Components for Optimized Longfiber Reinforced Thermoplastics mehr
    International Polymer Processing 17 (2002) 153-157


  198. Datsyuk, V.; Häußler, L.; Wagenknecht, U.; Voronov, S.; Tokarev, V.; Bednarska, O.
    Polypropylene/Polyperoxide Interaction in the Melt Phase mehr
    Macromolecular Symposia 164 (2001) 357-367


  199. Petzold, G.; Lunkwitz, K.; Geißler, U.; Smolka, N.
    Effektives Flockungsmittelsystem zur Klärung anorganischer Trüben mehr
    WLB Wasser, Luft und Boden 45 (2001)


  200. Wolf, D.; Wagenknecht, U.; Kretzschmar, B.
    Interface Controlled Materials
    Nanocomposites of the Polyolefine Clay Type - New Products Using a Novel Compounding Technique     mehr
    Wiley-VCH (2000) 189-193


  201. Geißler, U.; Kunze, K.; Kretzschmar, B.; Lunkwitz, K.
    Gleitlagerwerkstoffe auf der Basis von POM/PTFE-Compounds mehr
    Tribologie und Schmierungstechnik 47 (2000) 48-50


  202. Kravtsov, A.; Brünig, H.; Zhandarov, S.; Beyreuther, R.
    The Electret Effect in Polypropylene Fibers Treated in a Corona Discharge mehr
    Advances in Polymer Technology 19 (2000) 312-316


  203. Kravtsov, A.; Brünig, H.
    Features of electret charge formation in polypropylene fibers mehr
    Chimiceskie volokna (2000) 36-41


  204. Voronov, S.; Tokarev, V.; Datsyuk, V.; Seredyuk, V.; Bednarska, O.; Oduola, K.; Adler, H.; Puschke, C.; Pich, A.; Wagenknecht, U.
    Polyperoxidic Surfactants for Interface Modification and Compatibilization of Polymer Colloidal Systems. II. Design of Compatibilizing Layers mehr
    Journal of Applied Polymer Science 76 (2000) 1228-1239


 
Publications
Publikationen

Abteilungen und Gruppen

Verarbeitungsprozesse

News

8th International Conference on Nanostructured Polymers and Nanocomposites
Mai 24: Prof. Theo Dingemans, High-performance Polyetherimides with 0-D, 1-D and 2-D Carbon Nano Reinforcements.
Mai 31: Prof. Patrick Theato, Reactive and Photo-Cleavable Polymers and Block copolymers for Thin Film Application.
Juni 6: Prof. O. Kuksenok, Designing active polymer gels with biomimetric functionality: from reconfiguration to direct motion and autochemotaxis.
Juni 7: Prof. Klaus Huber, Specific Binding of Cations to Polyacrylates in Dilute Solution – a Combined SAXS and ASAXS Study.
8th Workshop Ellipsometry
6th International Conference on Carbon NanoParticle Based Composites