Departments > Processing > Publications

Publications

  1. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Preparation of natural rubber based thermoplastic vulcanizates by electron induced reactive processing more
    Kautschuk Gummi Kunststoffe 66 (2013) 47-50


  2. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Polypropylene/natural rubber thermoplastic vulcanizates by eco-friendly and sustainable electron induced reactive proecessing more
    Radiation Physics and Chemistry 88 (2013) 74-81


  3. Monami, A.; Reincke, K.; Grellmann, W.; Kretzschmar, B.
    Temperature dependence of fracture behaviour of PA6/OMMT nanocomposites more
    Journal of Applied Polymer Science 128 (2013) 1885-1894


  4. Asadinezhad, A.; Khonakdar, H. A.; Jafari, S.H.; Simon, F.; Wagenknecht, U.
    A surface analysis of polypropylene/clay nanocomposites exposed to electron irradiation more
    Journal of Applied Polymer Science 128 (2013) 1569-1574


  5. Kutlu, B.; Leuteritz, A.; Boldt, R.; Jehnichen, D.; Wagenknecht, U.; Heinrich, G.
    PANI-LDH prepared by polymerization-adsorption method and processing to conductive compounds more
    Applied Clay Science 72 (2013) 91-95


  6. Khonakdar, H. A.; Ehsani, M.; Asadinezhad, A.; Jafari, S.H.; Wagenknecht, U.
    Nanofilled polypropylene/poly(trimethylene terephthalate) blends: A morphological and mechanical properties study more
    Journal of Macromolecular Science Part B - Physics 52 (2013) 897-909


  7. Mostafaiyan, M.; Saeb, M. R.; Ahmadi, Z.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    A numerical study on deformation of Newtonian droplets throug converging cylindrical dies more
    e-Polymers (2013) 1-18


  8. Saeb, M. R.; Ramezani-Dakhel, H.; Khonakdar, H. A.; Heinrich, G.; Wagenknecht, U.
    A comparative study on curing characteristics and thermomechanical properties of elastomeric nanocomposites: the effects of eggshell and calcium carbonate nanofillers more
    Journal of Applied Polymer Science 127 (2013) 4241-4250


  9. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Thermal properties of Carboxylated nitrile rubber/nylon-12 composites-filled lignocellulose materials more
    Journal of Thermoplastic Composite Materials 26 (2013) Online First


  10. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of "dry liquids" for post-processing crosslinking reactions more
    Rubber Fibres Plastics International : RFP 8 (2013) 36-39


  11. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    High performance, natural rubber thermoplastic elastomers using accelerated electrons more
    SPE Plastics Research Online (2013) Article online


  12. Lonkar, S. P.; Leuteritz, A.
    Antioxidant intercalated layered double hydroxides: a new multifunctional nanofiller for polymers more
    RSC Advances 3 (2013) 1495-1501


  13. Lonkar, S. P.; Kutlu, B.; Leuteritz, A.; Lonkar, S. P.
    Nanohybrids of phenolic antioxidant intercalated into MgAl-layered double hydroxide clay more
    Applied Clay Science 71 (2013) 8-14


  14. Kundu, M. K.; Das, C. K.; Nigam, V.; Saxena, A. K.; Gohs, U.
    Effect of nano fillers on polyphospjazene elastomer under the influence of temperature and radiation: a comparative study more
    International Journal of Scientific Engineering and Technology 1 (2013) 169-176


  15. Mondal, M.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Efficiency of high energy electrons to produce polypropylene/natural rubber-based thermoplastic elastomer more
    Polymer Engineering and Science 53 (2013) Early view


  16. Ashabi, L.; Jafari, S.H.; Khonakdar, H. A.; Boldt, R.; Wagenknecht, U.; Heinrich, G.
    Tuning the processability, morphology and biodegradability of clay incorporated PLA/LLDPE blends via selective localization of nanoclay induced by melt mixing sequence more
    eXPRESS Polymer Letters 7 (2013) 21-39


  17. Radusch, H. J.; Kolesov, I.; Gohs, U.; Heinrich, G.
    Multiple shape-memory behavior of polyethylene/polycyclooctene blends cross-linked by electron irradiation more
    Advances in Science and Technology 77 (2013) 307-312


  18. Entezaam, M.; Khonakdar, H. A.; Yousefi, A. A.; Jafari, S.H.; Wagenknecht, U.; Heinrich, G.
    On nanoclay localization in polypropylene/poly(ethylene terephthalate) blends: Correlation with thermal and mechanical properties more
    Materials and Design 45 (2012) 110-117


  19. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Gefälltes Calciumcarbonat als Trägerpartikel von Reagenzien für Vernetzungsreaktionen more
    GAK : Gummi Fasern Kunststoffe 65 (2012) 754-757


  20. Radusch, H. J.; Kolesov, I.; Gohs, U.; Heinrich, G.
    Multiple shape-memory behavior of polyethylene/polycyclooctene blends cross-linked by electron irradiation more
    Macromolecular Materials and Engineering 297 (2012) 1225-1234


  21. Lonkar, S. P.; Kushwaha, O. S.; Leuteritz, A.; Heinrich, G.; Singh, R. P.
    Self photostabilizing UV-durable MWCNT/polymer nanocomposites more
    RSC Advances 2 (2012) 12255-12262


  22. Wang, De-Yi; Gohs, U.; Kang, N.-J.; Leuteritz, A.; Boldt, R.; Wagenknecht, U.; Heinrich, G.
    Method for simultaneously improving thermal stability and mechanical properties of poly(lactic acid): Effect of high-energy electrons on the morphological, mechanical, and thermal properties of PLA/MMT nanocomposite more
    Langmuir 28 (2012) 12601-12608


  23. Breier, A.; Hofmann, A.; Rentsch, C.; Rentsch, B.; Gliesche, K.; Scharnweber, D.; Heinrich, G.
    Integrating a drug release system into textile long bone implants by dip-coating from drug-suspension - influence of grain size and grain size distribution on the releasing profile more
    Drug Delivery Letters 2 (2012) 171-179


  24. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    The effect of silane treated hybrid filler on the mechanical and thermal performance of carboxylated nitrile butadiene rubber (XNBR) composites more
    International Polymer Processing 27 (2012) 328-333


  25. Hintze, C.; Wießner, S.; Wagenknecht, U.; Heinrich, G.
    Einfluss von Verarbeitungsparametern auf Morphologie und Anwendungseigenschaften von aramidkurzfaserverstärkten Elastomercomposites more
    GAK : Gummi Fasern Kunststoffe 65 (2012) 562-567


  26. Mousa, A.; Heinrich, G.; Simon, F.; Wagenknecht, U.; Stöckelhuber, K.W.; Dweiri, R.
    Carboxylated nitrile butadiene rubber/hybrid filler composites more
    Materials Research 15 (2012) 671-678


  27. Frick, A.; Sich, D.; Heinrich, G.; Lehmann, D.; Gohs, U.; Stern, C.
    Properties of melt processable PTFE/PEEK blends: the effect of reactive compatibilization using electron beam irradiated melt processable PTFE more
    Journal of Applied Polymer Science 128 (2012) 1815-1827


  28. Thunga, M.; Xia, Y.; Gohs, U.; Heinrich, G.; Larock, R. C.; Kessler, M. R.
    Influence of electron beam irradiation on the mechanical properties of vegetable-oil-based biopolymers more
    Macromolecular Materials and Engineering 297 (2012) 799-806


  29. Saeb, M. R.; Khonakdar, H. A.; Razban, M.; Jafari, S.H.; Garmabi, H.; Wagenknecht, U.
    Morphology prediction in HDPE/PA-6/EVOH ternary blends: defining the role of elasticity ratio more
    Macromolecular Chemistry and Physics 213 (2012) 1791-1802


  30. Wawrzyn, E.; Schartel, B.; Ciesielski, M.; Kretzschmar, B.; Braun , U.; Döring, M.
    Are novel aryl phosphates competitors for bisphenol a bis(diphenyl phosphate) in halogen-free flame-retarded polycarbonate/acrylonitrile-butadiene-styrene blends? more
    European Polymer Journal 48 (2012) 1561-1574


  31. Li, X.; Kretzschmar, B.; Janke, A.; Häußler, L.; Schneider, K.; Stamm, M.
    Investigation of structure and mechanical behavior pf polyamide 6/ZnO and polyamide 6/Al2O3 nanocomposites more
    Advanced Materials Research 557-559 (2012) 272-276


  32. Grothe, J.; Kaskel, S.; Leuteritz, A.
    Nanocomposites and hybrid mateials more
    in: Polymer Science: A Comprehensive Reference, Moeller, M.; Matyjaszewski, K., ed. (Elsevier 2012) , 8.08, 177-209


  33. Rajeshbabu, R.; Gohs, U.; Naskar, K.; Mondal, M.; Wagenknecht, U.; Heinrich, G.
    Electron-induced reactive processing of poly(propylene)/ethylene-octene copolymer blends: A novel route to prepare thermoplastic vulcanizates more
    Macromolecular Materials and Engineering 297 (2012) 659-669


  34. Le, H. H.; Hoang, X. T.; Das, A.; Gohs, U.; Stöckelhuber, K.W.; Boldt, R.; Heinrich, G.; Adhikari, R.; Radusch, H. J.
    Kinetics of filler wetting and dispersion in carbon nanotube/rubber composites more
    Carbon 50 (2012) 4543–4556


  35. Wießner, S.; Wagenknecht, U.; Heinrich, G.; Michael, H.; Mennig, G.
    Continuous reactive compounding of elastomeric alloys based on ground tyre rubber and polypropylene in a co-rotating twin screw extruder more
    Kautschuk Gummi Kunststoffe 65 (2012) 28-36


  36. Jafari, S.H.; Asadinezhad, A.; Kalati-vahid, A.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G.
    Polypropylene/poly(trimethylene terephthalate) blend nanocomposite: a thermal properties study more
    Polymer-Plastics Technology and Engineering 51 (2012) 682-688


  37. Mousa, A.; Heinrich, G.; Wagenknecht, U.; Kretzschmar, B.; Auf der Landwehr, M.
    The Application of Di-isocyante modified agro-polymer as filler for XNBR/PA-12 thermoplastic elastomer composites more
    Journal of Macromolecular Science - A: Pure Applied Chemistry 49 (2012) 385-396


  38. Wang, De-Yi; Das, A.; Leuteritz, A.; Mahaling, R. N.; Jehnichen, D.; Wagenknecht, U.; Heinrich, G.
    Structural characteristics and flammability of fire retarding EPDM/layered double hydroxide (LDH) nanocomposites more
    RSC Advances 2 (2012) 3927-3933


  39. Mousa, A.; Heinrich, G.; Gohs, U.; Wagenknecht, U.
    Mechanical properties of electron beam treated carboxylated nitrile butadiene rubber (XNBR) composites reinforced by organic/inorganic hybrid filler more
    Journal of Composite Materials 46 (2012) 1151-1157


  40. Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    In-situ modification of unmodified montmorillonite in polypropylene by electron-induced reactive processing more
    Macromolecular Chemistry and Physics 213 (2012) 729-737


  41. Khonakdar, H. A.; Golriz, M.; Jafari, S.H.; Abedini, H.; Wagenknecht, U.; Heinrich, G.
    A study on transreactions of PET/PEN reactive blending in a twin-screw extruder using axial dispersion model more
    Macromolecular Theory and Simulations 21 (2012) 340-349


  42. Manhique, A.; Focke, W. W.; Leuteritz, A.; Madivate, C.
    Layered double hydroxides as nano additives in poly(e-caprolactone) more
    Molecular Crystals and Liquid Crystals 556 (2012) 114-123


  43. Mahmood, N.; Khan, Asad Ullah; Ali, Z.; Khan, M. Sohail; Haq, A. U.; Stöckelhuber, K.W.; Gohs, U.; Heinrich, G.
    Preparation and characterization of thermoplastic polyurethane–urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites more
    Journal of Applied Polymer Science 123 (2012) 3635-3643


  44. Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Electron-induced reactive processing of thermoplastic vulcanizate based on polypropylene and ethylene propylene diene terpolymer rubber more
    Polymer Journal 44 (2012) 439-448


  45. Leuteritz, A.; Kutlu, B.; Meinl, J.; Wang, De-Yi; Das, A.; Wagenknecht, U.; Heinrich, G.
    Layered double hydroxides (LDH): a multifunctional versatile system for nanocomposites more
    Molecular Crystals and Liquid Crystals 556 (2012) 107-113


  46. Schmidt, T.; Hoburg, A. T.; Broziat, C.; Smith, M.; Gohs, U.; Pruss, A.; Scheffler, S.
    Sterilization with electron beam irradiation influences the biomechanical properties and the early remodelling of tendon allografts for reconstruction of the anterior cruciate ligament (ACL) more
    Cell and Tissue Banking 13 (2012) 387-400


  47. Schmidt, T.; Hoburg, A. T.; Gohs, U.; Schumann, W.; Sim-Brandenburg, J. W.; Nitsche, A.; Scheffler, S.; Pruss, A.
    The inactivation effect of standard and fractionated electron beam irradIation on enveloped and non-enveloped viruses in a tendon transplant model more
    Transfusion Medicine and Hemotherapy 39 (2012) 29-35


  48. Mousa, A.; Heinrich, G.; Kretzschmar, B.; Wagenknecht, U.; Das, A.
    Utilization of agrowaste polymers in PVC/NBR alloys: tensile, thermal, and morphological properties more
    International Journal of Chemical Engineering 2012 (2012) Article ID 121496, 5 pages


  49. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of 'dry liquids' for post-processing crosslinking reactions more
    e-Polymers no. 023 (2012) 9 Seiten, http://www.e-polymers.org


  50. Das, A.; George, J. J.; Kutlu, B.; Leuteritz, A.; Wang, De-Yi; Rooj, S.; Jurk, R.; Rajeshbabu, R.; Stöckelhuber, K.W.; Galiatsatos, V.; Heinrich, G.
    A novel thermotropic elastomer based on highly-filled LDH-SSB composites more
    Macromolecular Rapid Communications 33 (2012) 337-342


  51. Engelmann, G.; Gohs, U.; Ganster, J.
    Monomer cast polyamide 6 composites and their treatment with high-energy electrons more
    Journal of Applied Polymer Science 123 (2012) 1201-1211


  52. Jafari, S.H.; Kalati-vahid, A.; Khonakdar, H. A.; Asadinezhad, A.; Wagenknecht, U.; Jehnichen, D.
    Crystallization and melting behavior of nanoclay-containing polypropylene/poly(trimethylene terephthalate) blends more
    eXPRESS Polymer Letters 6 (2012) 148-158


  53. Rajeshbabu, R.; Naskar, K.; Thakur, V.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Preparation of polypropylene (PP) / ethylene octene copolymer (EOC) thermoplastic vulcanizates (TPVs) by electron induced reactive processing more
    Radiation Physics and Chemistry 80 (2011) 1398-1405


  54. Mohammadi, S. R.; Khonakdar, H. A.; Ehsani, M.; Jafari, S.H.; Wagenknecht, U.; Kretzschmar, B.
    Investigation of thermal behavior and decomposition kinetic of PET/PEN blends and their clay containing nanocomposites more
    Journal of Polymer Research 18 (2011) 1765-1775


  55. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Rubber-wood composites from chemically modified olive husk powder and carboxylated nitrile butadiene rubber: cure characteristics, tensile behavior, and morphological studies more
    Journal of Wood Chemistry and Technology 32 (2011) 82-92


  56. Le, H. H.; Schoß, M.; Ilisch, S.; Gohs, U.; Heinrich, G.; Pham, T.; Radusch, H. J.
    CB filled EOC/EPDM blends as a shape-memory material: Manufacturing, morphology, and electrical properties more
    Polymer 52 (2011) 5858-5866


  57. Menzer, K.; Krause, B.; Boldt, R.; Kretzschmar, B.; Weidisch, R.; Pötschke, P.
    Percolation behaviour of multiwalled carbon nanotubes of altered length and primary agglomerate morphology in melt mixed isotactic polypropylene-based composites more
    Composites Science and Technology 71 (2011) 1936-1943


  58. Entezam, M.; Khonakdar, H. A.; Yousefi, A. A.; Jafari, S.H.; Wagenknecht, U.; Heinrich, G.; Kretzschmar, B.
    Influence of interfacial activity and micelle formation on rheological behavior and microstructure of reactively compatibilized PP/PET blends more
    Macromolecular Materials and Engineering 297 (2011) 312–328


  59. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Cure characteristics and mechanical properties of carboxylated nitrile butadiene rubber (XNBR) vulcanizate reinforced by organic filler more
    Polymer-Plastics Technology and Engineering 50 (2011) 1388-1392


  60. Müller, M.; Krause, B.; Kretzschmar, B.; Pötschke, P.
    Influence of feeding conditions in twin-screw extrusion of PP/MWCNT composites on electrical and mechanical properties more
    Composites Science and Technology 71 (2011) 1535-1542


  61. Hoburg, A. T.; Keshlaf, S.; Schmidt, T.; Smith, M.; Gohs, U.; Perka, C.; Pruss, A.; Scheffler, S.
    Fractionation of high-dose electron beam irradiation of BPTB grafts provides significantly improved viscoelastic and structural properties compared to standard gamma irradiation more
    Knee surgery, sports traumatology, arthroscopy 19 (2011) 1955-1961


  62. Gramm, S.; Teichmann, J.; Nitschke, M.; Gohs, U.; Eichhorn, K.-J.; Werner, C.
    Electron beam immobilization of functionalized poly(vinyl methyl ether) thin films on polymer surfaces - Towards stimuli responsive coatings for biomedical purposes more
    eXPRESS Polymer Letters 5 (2011) 970-976


  63. Fischer, D.; Müller, J.; Kummer, S.; Kretzschmar, B.
    Real time monitoring of morphologic and mechanical properties of polymer nanocomposites during extrusion by near infrared and ultrasonic spectroscopy more
    Macromolecular Symposia 305 (2011) 20-27


  64. Lappan, U.; Geißler, U.; Gohs, U.
    Radiation-induced graft copolymerization of styrene into tetrafluoroethylene-hexafluoropropylene-vinylidene fluoride (THV) terpolymer films more
    Macromolecular Materials and Engineering 296 (2011) 843-849


  65. Gohs, U.; Leuteritz, A.; Naskar, K.; Volke, S.; Wießner, S.; Heinrich, G.
    Reactive EB processing of polymer compounds more
    Macromolecular Symposia 296 (2011) 589-595


  66. Vyalikh, A.; Wang, De-Yi; Wagenknecht, U.; Heinrich, G.; Scheler, U.
    Molecular dynamics in aluminum layered double hydroxides as studied by 1H T1p NMR measurements more
    Chemical Physics Letters 509 (2011) 138-142


  67. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Heinrich, G.; Werner, C.
    Hollow fibers made from a poly(3-hydroxybutyrate)/poly-e-caprolactone blend more
    eXPRESS Polymer Letters 5 (2011) 643-652


  68. Das, A.; Wang, De-Yi; Leuteritz, A.; Subramaniam, K.; Greenwell, H. C.; Wagenknecht, U.; Heinrich, G.
    Preparation of zinc oxide free, transparent rubber nanocomposites using a layered double hydroxide filler more
    Journal of Materials Chemistry 21 (2011) 7194-7200


  69. Wagenknecht, U.; Gohs, U.; Leuteritz, A.; Volke, S.; Wießner, S.; Heinrich, G.
    Modification of particle filled polymers with high energy electrons under in-stationary conditions of melt mixing more
    Macromolecular Symposia 301 (2011) 146-150


  70. Costa, F. R.; Leuteritz, A.; Meinl, J.; Wagenknecht, U.; Heinrich, G.
    LDH as nanofiller: Organic modification and dispersion in polymers more
    Macromolecular Symposia 301 (2011) 46-54


  71. Gedan-Smolka, M.; Müller, A.; Gohs, U.; Calvimontes, A.
    Electron pretreatment of sheet molding compounds (SMC) more
    Progress in Organic Coatings (2011) 159-167


  72. Sablong, R.; Duchateau, R.; Koning, Cor E.; Pospiech, D.; Korwitz, A.; Komber, H.; Starke, S.; Häußler, L.; Jehnichen, D.; Auf der Landwehr, M.
    Incorporation of a flame retardancy enhancing phosphorus-containing diol into poly(butylene terephthalate) via solid state polycondensation: A comparative study more
    Polymer Degradation and Stability 96 (2011) 334-341


  73. Wang, De-Yi; Leuteritz, A.; Kutlu, B.; Auf der Landwehr, M.; Jehnichen, D.; Wagenknecht, U.; Heinrich, G.
    Preparation and investigation of the combustion behavior of polypropylene/organomodified MgAl-LDH micro-nanocomposite more
    Journal of Alloys and Compounds 509 (2011) 3497-3501


  74. Rooj, S.; Thakur, V.; Gohs, U.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    In situ reactive compatibilization of polypropylene/epoxidized natural rubber blends electron induced reactive processing: novel in-line mixing technology more
    Polymers for Advanced Technologies 22 (2011) 2257-2263


  75. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    Thermoplastic composites based on renewable natural resources: Unplasticized PVC/Olive Husk more
    International Journal of Polymeric Materials 59 (2010) 843-853


  76. Wang, De-Yi; Costa, F. R.; Leuteritz, A.; Schönhals, A.; Vyalikh, A.; Scheler, U.; Wagenknecht, U.; Kutlu, B.; Heinrich, G.
    Polyolefin nanocomposites with layered double hydroxides more
    in: Advances in polyolefin nanocomposites, Vikas Mittal, ed. (CRC Press 2010) , 225-245


  77. Sritragool, K.; Michael, H.; Gehde, M.; Gohs, U.; Heinrich, G.
    Polypropylene/rubber particle blends by electron induced reactive processing more
    Kautschuk Gummi Kunststoffe 63 (2010) 554-558


  78. Wang, De-Yi; Leuteritz, A.; Wang, Yu-Zhong; Wagenknecht, U.; Heinrich, G.
    Preparation and burning behaviors of flame retarding biodegradable poly (latic acid) nanocomposite based on zinc aluminum layered double hydroxide more
    Polymer Degradation and Stability 95 (2010) 2474-2480


  79. Thakur, V.; Leuteritz, A.; Gohs, U.; Kretzschmar, B.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    Montmorillonite nanocomposites with electron-beam modified atactic polypropylene more
    Applied Clay Science 49 (2010) 200-204


  80. Hoburg, A. T.; Keshlaf, S.; Schmidt, T.; Smith, M.; Gohs, U.; Perka, C.; Pruss, A.; Scheffler, S.
    Effect of electron beam irradiation on biomechanical properties of patellar tendon allografts in anterior cruciate ligament reconstruction more
    The American Journal of Sports Medicine 38 (2010) 1134-1140


  81. Handge, U.A.; Altstädt, V.; Hedicke-Höchstötter, K.; Pospiech, D.; Jehnichen, D.; Kretzschmar, B.
    Surface functionalization of halloysite nanotubes for polyamide 6 composites more
    Zeitschrift Kunststofftechnik = Journal of plastics technology : archivierte, rezensierte Internetzeitschrift des Wissenschaftlichen Arbeitskreises Kunstofftechnik (WAK) 6 (2010) 316-337


  82. Wang, De-Yi; Das, A.; Costa, F. R.; Leuteritz, A.; Wang, Yu-Zhong; Wagenknecht, U.; Heinrich, G.
    Synthesis of organo Co-Al layered double hydroxide via a novel single step self-assembling method and its use as flame retardant nanofiller in PP more
    Langmuir 26 (2010) 14162-14169


  83. Heinrich, G.; Gohs, U.; Stöckelhuber, K.W.
    Leibniz Applikationslabor Multifunktionelle Polymerwerkstoffe more
    Dresdner Transferbrief 3.10 (2010) 15


  84. Sritragool, K.; Michael, H.; Gehde, M.; Gohs, U.; Heinrich, G.
    PP/rubber particle blends by high energy electron treatment under stationary condition more
    Kautschuk Gummi Kunststoffe 63 (2010) 377-382


  85. Costa, F. R.; Pradhan, S.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    XNBR/LDH nanocomposites: Effect of vulcanization and organic modifier more
    Journal of Polymer Science: Part B: Polymer Physics 48 (2010) 2302-2311


  86. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Werner, C.
    Hollow poly(3-hydroxybutyrate) fibers produced by melt spinning more
    Macromolecular Materials and Engineering 295 (2010) 585-594


  87. Villmow, T.; Kretzschmar, B.; Pötschke, P.
    Influence of screw configuration, residence time, and specific mechanical energy in twin-screw extrusion of polycaprolactone/multi-walled carbon nanotube composites more
    Composites Science and Technology 70 (2010) 2045-2055


  88. Lappan, U.; Geißler, U.; Gohs, U.; Uhlmann, St.
    Grafting of styrene into pre-irradiated fluoropolymer films: Influence of base material and irradiation temperature more
    Radiation Physics and Chemistry 79 (2010) 1067-1072


  89. Schuricht, W.; Leuteritz, A.
    Entwicklungsanforderungen an die Rohrhersteller more
    EuroHeat & Power Deutschland 39 (2010) 38-41


  90. Wang, De-Yi; Leuteritz, A.; Boldt, R.; Häußler, L.; Wagenknecht, U.; Heinrich, G.
    Thermal degradation behaviors of nanocomposite based on Polypropylene and Co-Al layered double hydroxide more
    Polymer Degradation and Stability 95 (2010) 285-290


  91. Hoffmann, T.; Pospiech, D.; Häußler, L.; Sahre, K.; Komber, H.; Harnisch, C.; Auf der Landwehr, M.; Schäfer, A.; Döring, M.
    Phosphorus-containing polysulfones - a comparative study more
    High Performance Polymers 22 (2010) 715-741


  92. Wurm, A.; Ismail, M.; Kretzschmar, B.; Pospiech, D.; Schick, C.
    Retarded crystallization in polyamide/layered silicates nanocomposites caused by an immobilized interphase more
    Macromolecules 43 (2010) 1480-1487


  93. Wang, De-Yi; Costa, F. R.; Vyalikh, A.; Leuteritz, A.; Scheler, U.; Jehnichen, D.; Wagenknecht, U.; Häußler, L.; Heinrich, G.
    One-step synthesis of organic LDH and its comparison with regeneration and anion exchange method more
    Chemistry of Materials 21 (2010) 4490-4497


  94. Rentsch, C.; Rentsch, B.; Breier, A.; Hofmann, A.; Manthey, S.; Scharnweber, D.; Biewener, A.; Zwipp, H.
    Evaluation of the osteogenic potential and vascularization of 3D poly(3)hydroxybutyrate scaffolds subcutaneously implanted in nude rats more
    Journal of Biomedical Materials Research Part A 92A (2010) 185-195


  95. Pötschke, P.; Andres, T.; Villmow, T.; Pegel, S.; Brünig, H.; Kobashi, K.; Fischer, D.; Häußler, L.
    Liquid sensing properties of fibres prepared by melt spinning from poly(lactic acid) containing multi-walled carbon nanotubes more
    Composites Science and Technology 70 (2010) 343-349


  96. Vyalikh, A.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.; Massiot, D.; Scheler, U.
    From layered double hydroxides to layered double hydroxide-based nanocomposites - A solid-state NMR study more
    Journal of Physical Chemistry / C 113 (2009) 21308-21313


  97. Heinrich, G.; Breier, A.; Hinüber, C.
    Bioabbaubare Polymere in textiler Form für die regenerative Medizin more
    Dresdner Transferbrief 17 (2009) 12


  98. Larsen, C. Ting; Togeskov, P.; Leuteritz, A.
    Alterung von Kunststoffmantelrohren Diffusion der Zellgase durch polyethylen more
    EuroHeat & Power Deutschland 38 (2009) 36-41


  99. Wang, De-Yi; Leuteritz, A.; Wagenknecht, U.; Heinrich, G.
    Self-assembling organomodified Co/Al based layered double hydroxides (LDH) via one-step route more
    Transactions of Nonferrous Metals Society of China 19 (2009) 1479-1482


  100. Naskar, K.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    PP-EPDM thermoplastic vulcanisates (TPVs) by electron induced reactive processing more
    eXPRESS Polymer Letters 3 (2009) 677-683


  101. Rentsch, B.; Rentsch, C.; Breier, A.; Hofmann, A.; Scharnweber, D.
    Embroidered and surface modified polycaprolactone-co-lactide scaffolds as bone substitute - in vitro characterization more
    Annals of Biomedical Engineering 37 (2009) 2118-2128


  102. Larsen, C. Ting; Togeskov, P.; Leuteritz, A.
    Extending the service life of pre-insulated pipes: Analyses of diffusion rates through PE and impact on ageing more
    EuroHeat & Power International 6 (2009) 48-53


  103. Thakur, V.; Das, A.; Mahaling, R. N.; Rooj, S.; Gohs, U.; Wagenknecht, U.; Heinrich, G.
    Influence of layered double hydroxides on the curing of carboxylated nitrile rubber with zinc oxide more
    Macromolecular Materials and Engineering 294 (2009) 561-569


  104. Mousa, A.; Heinrich, G.; Gohs, U.; Häßler, R.; Wagenknecht, U.
    Application of renewable agro-waste-based olive pomace on the mechanical and thermal performance of toughened PVC more
    Polymer-Plastics Technology and Engineering 48 (2009) 1030-1040


  105. Burkert, S.; Gohs, U.; Uhlmann, P.; Stamm, M.
    Tuning of biocompatible thermo-sensitive polymer brushes by e-beam irradiation more
    Polymeric Materials: Science and Engineering 101 (2009) 1162


  106. Lappan, U.; Geißler, U.; Gohs, U.; Uhlmann, St.
    Influence of irradiation temperature on grafting of styrene into poly(tetrafluoroethylene-co-hexafluoropropylene) films more
    Macromolecular Materials and Engineering 294 (2009) 510-515


  107. Focke, W. W.; Joseph, S.; Grimbeek, J.; Summers, G. J.; Kretzschmar, B.
    Mechanical properties of ternary blends of ABS + HIPS + PETG more
    Polymer-Plastics Technology and Engineering 48 (2009) 814-820


  108. Schönhals, A.; Goering, H.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Dielectric properties of nanocomposites based on polyethylene and layered double hydroxide more
    Macromolecules 42 (2009) 4165-4174


  109. Cherif, C.; Rödel, H.; Hoffmann, G.; Diestel, O.; Herzberg, C.; Paul, C.; Schulz, C.; Großmann, K.; Mühl, A.; Mäder, E.; Brünig, H.
    Textile Technologien für hybridgarnbasierte komplexe Preformstrukturen more
    Zeitschrift Kunststofftechnik : Journal of plastics technology / Wissenschaftlicher Arbeitskreis der Universitäts-Professoren der Kunststofftechnik 6 (2009) 103-129


  110. Costa, F. R.; Leuteritz, A.; Wagenknecht, U.; Auf der Landwehr, M.; Jehnichen, D.; Häußler, L.; Heinrich, G.
    Alkyl sulfonate modified LDH: effect of alkyl chain length on intercalation behavior, particle morphology and thermal stability more
    Applied Clay Science 44 (2009) 7-14


  111. Khonakdar, H. A.; Golriz, M.; Jafari, S.H.; Wagenknecht, U.
    Correlation of sequence block lengths and degree of randomness with melt rheological properties in PET/PEN blends more
    Macromolecular Materials and Engineering 294 (2009) 272-280


  112. Pötschke, P.; Villmow, T.; Andres, T.; Kobashi, K.; Rentenberger, R.; Brünig, H.; Fischer, D.; Häußler, L.
    Melt processed polymer - carbon nanotube composites as materials for liquid sensing applications more
    Polymer Preprints 50 (2009) 419-420


  113. Gehde, M.; Gohs, U.; Heinrich, G.; Michael, K.; Sritragool, K.; Wagenknecht, U.; Wießner, S.
    Modifizierung von Gummipartikel/Thermoplastmischungen mit energiereichen Elektronen more
    GAK : Gummi Fasern Kunststoffe 62 (2009) 88-93


  114. Kalaivani, S.; Vijayabaskar, V.; Thunga, M.; Stephan, M.; Dorschner, H.; Heinrich, G.; Bhowmick, A. K.; Wagenknecht, U.
    Effect of irradiation temperatures on nitrile rubber nanocomposites more
    Plastics, Rubber and Composites 38 (2009) 39-45


  115. Khan, M. Sohail; Lehmann, D.; Heinrich, G.; Gohs, U.; Franke, R.
    Structure-property effects on mechanical, friction and wear properties of electron modified PTFE filled EPDM composite more
    eXPRESS Polymer Letters 3 (2009) 39-48


  116. Khan, M. Sohail; Franke, R.; Gohs, U.; Lehmann, D.; Heinrich, G.
    Friction and wear behaviour of electron beam modified PTFE filled EPDM compounds more
    Wear 266 (2009) 175-183


  117. Hasan, M. M. B.; Dutschk, V.; Brünig, H.; Mäder, E.; Häußler, L.; Häßler, R.; Cherif, C.; Heinrich, G.
    Comparison of tensile, thermal, anf thermo-mechanical properties of polyester filaments having different cross-sectional shape more
    Journal of Applied Polymer Science 111 (2008) 805-812


  118. Das, A.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Nanocomposites based on chloroprene rubber: Effect of chemical nature and organic modification of nanoclay on the vulcanizate properties more
    European Polymer Journal 44 (2008) 3456-3465


  119. Pospiech, D.; Jehnichen, D.; Komber, H.; Korwitz, A.; Janke, A.; Hoffmann, T.; Kretzschmar, B.; Reuter, U.; Döring, M.; Seibold, S.; Perez Graterol, R.; Sandler, J.; Altstädt, V.; Bellucci, F.; Camino, G.
    New polymers for tailor-made nanocomposites more
    Journal of Nanostructured Polymers and Nanocomposites 4 (2008) 62-75


  120. Bräuer, M.; Tändler, B.; Komber, H.; Pompe, G.; Bellmann, C.; Brünig, H.; Hess, C.
    Beiträge zum Reaktionsmechanismus des Elastanfaserschmelzspinnens nach dem Vernetzerverfahren more
    Kautschuk Gummi Kunststoffe 61 (2008) 531-539


  121. Wagenknecht, U.; Kretzschmar, B.; Pötschke, P.; Costa, F. R.; Pegel, S.; Stöckelhuber, K.W.; Heinrich, G.
    Polymere Nanokomposite mit anorganischen Funktionsfüllstoffen more
    Chemie Ingenieur Technik 80 (2008) 1683-1699


  122. Pradhan, S.; Costa, F. R.; Jehnichen, D.; Wagenknecht, U.; Bhowmick, A. K.; Heinrich, G.
    Elastomer/LDH nanocomposites: Synthesis and studies on nanoparticle dispersion, interfacial properties and interfacial adhesion more
    European Polymer Journal 44 (2008) 3122-3132


  123. Reichelt, S.; Eichhorn, K.-J.; Gohs, U.; Simon, F.; Fleischmann, S.; Voit, B.
    Immobilization of a hyperbranched polyester via grafting-to and electron beam irradiation more
    Langmuir 24 (2008) 9392-9400


  124. Blechschmidt, D.; Lindner, R.; Erth, H.; Brünig, H.
    Spunbonded nonwovens made from polyactides for technical applications more
    Chemical Fibers International 58 (2008) 190-193


  125. Burns, M.; Wagenknecht, U.; Kretzschmar, B.; Focke, W. W.
    Effect of hydrated fillers and red phosphorus on the limiting oxygen index of poly(ethylene-co-vinyl actate)-poly(vinyl butyral) and low density polyethylene-poly(ethylene-co-vinyl alcohol) blends more
    Journal of Vinyl and Additive Technology 14 (2008) 113-119


  126. Schulze, U.; Sen Majumder, P.; Heinrich, G.; Stephan, M.; Gohs, U.
    Electron beam crosslinking of atactic polypropylene: Development of a potential novel elastomer more
    Macromolecular Materials and Engineering 293 (2008) 692-699


  127. Villmow, T.; Pötschke, P.; Pegel, S.; Häußler, L.; Kretzschmar, B.
    Influence of twin-screw extrusion conditions on the dispersion of multi-walled carbon nanotubes in a poly(lactic acid) matrix more
    Polymer 49 (2008) 3500-3509


  128. Wagenknecht, U.; Costa, F. R.; Heinrich, G.; Reinemann, S.
    Layered double hydroxides (LDH) - an environmentally friendly, nano scale flame retardant more
    Rubber, fibres, plastics international : RFP (2008) 206-209


  129. Mousa, A.; Heinrich, G.; Wagenknecht, U.
    The potential of O-MMT as a reinforcing filler for uncured and dynamically cured PVC/XNBR composites more
    Journal of Macromolecular Science - A: Pure Applied Chemistry 45 (2008) 733-741


  130. Wagenknecht, U.; Costa, F. R.; Heinrich, G.; Reinemann, S.
    Layered double hydroxides (LDH) - ein umweltfreundlicher nanoskaliger Flammhemmer more
    GAK Gummi Fasern Kunststoffe 61 (2008) 369-372


  131. Grenzer, M.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Nonlinear behavior of polyethylene/layered double hydroxide nanocomposites under shear flow. - In kyrill. Schr. more
    Vysokomol. Soedinenija, Ser. A 50 (2008) 868-881


  132. Li, X.; Schneider, K.; Kretzschmar, B.; Stamm, M.
    Deformation behavior of PP and PP/ZnO Nanocomposites as studied by SAXS and WAXS more
    Macromolecules 41 (2008) 4371-4379


  133. Stephan, M.; Gohs, U.;Heinrich, G.; Volke, S.; Wagenknecht, U.
    Electron Treatment of Thermoplastics under Reactive Conditions more
    Proceedings of the Polymer Processing Society 24th Annual Meeting (2008) 3 Pages


  134. Gohs, U.; Heinrich, G.; Stephan, M.; Volke, S.; Wagenknecht, U.
    Electron Treatment of Polymer Melts under Static and Mixing Conditions more
    Proceedings of the Polymer Processing Society 24th Annual Meeting (2008) 3 Pages


  135. Bellucci, F.; Terenzi, A.; Pospiech, D.; Leuteritz, A.; Frache, A.; Traverso, G.; Camino, G.
    Intercalation degree in PP/organoclay nanocomposites: role of surfactant structure more
    Polymers for Advanced Technologies 19 (2008) 547-555


  136. Grenzer, M.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Nonlinear behavior of polyethylene/layered double hydroxide nanocomposites under shear flow more
    Polymer Science / Series A 50 (2008) 573-582


  137. Vogel, R.; Voigt, D.; Tändler, B.; Gohs, U.; Häußler, L.
    Melt spinning of poly(3-hydroxybutyrate) for tissue engineering using electron-beam irradiated poly(3-hydroxybutyrate) as nucleation agent more
    Macromolecular Bioscience 8 (2008) 426-431


  138. Albrecht, V.; Reinsch, E.; Gohs, U.; Schünemann, R.; Husemann, K.; Simon, F.
    Zur elektrostatischen Trennung von Polyolefingemischen more
    Aufbereitungstechnik 49 (2008) 26-34


  139. Slouf, M.; Synkova, H.; Baldrian, J.; Marek, A.; Kovarova, J.; Schmidt, P.; Stephan, M.; Dorschner, H.; Gohs, U.
    Structural changes of UHMWPE after e-beam irradiation and thermal treatment more
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 85 (2008) 240-251


  140. Villmow, T.; Pegel, S.; Pötschke, P.; Wagenknecht, U.
    Influence of injection molding parameters on the electrical resistivity of polycarbonate filled with multi-walled carbon nanotubes more
    Composites Science and Technology 68 (2008) 777-789


  141. Costa, F. R.; Leuteritz, A.; Wagenknecht, U.; Jehnichen, D.; Häußler, L.; Heinrich, G.
    Intercalation of Mg-Al based layered double hydroxide by anionic surfactants containing different functionalities using regeneration method more
    Applied Clay Science 38 (2008) 153-164


  142. Vijayabaskar, V.; Stephan, M.; Kalaivani, S.; Volke, S.; Heinrich, G.; Dorschner, H.; Bhowmick, A. K.; Wagenknecht, U.
    Influence of radiation temperature on the crosslinking of nitrile rubber by electron beam irradiation more
    Radiation Physics and Chemistry 77 (2008) 511-521


  143. Costa, F. R.; Grenzer, M.; Wagenknecht, U.; Heinrich, G.
    Layered double hydroxide based polymer nanocomposites more
    in: Wax Crystal Control - Nanocomposites Stimuli-Responsive Polymers, Series: Advances in Polymer Science, ed. (Springer 2008) 210, 101-168


  144. Khizhnyak, S.; Vorobjava, K. O.; Kudryashova, E. V.; Malanni, M. N.; Auf der Landwehr, M.; Eichhorn, K.-J.; Pakhomov, P.
    Study of polymer composites and blends by means of FTIR spectroscopy, New approach (In kyrill. Schrift) more
    Tver State University 13 (2007) 75-82


  145. Dutschk, V.; Myat, Su Su; Brünig, H.; Märtin, J.; Stolz, M.; Breitzke, B.; Cherif, C.; Heinrich, G.
    The influence of different ether carboxylic acids on polyester fibre friction more
    Tenside Surfactants Detergents 44 (2007) 270-273


  146. Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    LDPE/Mg-Al layered double hydroxide nanocomposite: Thermal and flammability properties more
    Polymer Degradation and Stability 92 (2007) 1813-1823


  147. Schwarz, S.; Jaeger, W.; Paulke, B.-R.; Bratskaya, S.; Smolka, N.; Bohrisch, J.
    Cationic Flocculants Carrying Hydrophobic Functionalities: Applications of solid/liquid separation more
    Journal of Physical Chemistry / B 111 (2007) 8649-8654


  148. Stephan, M.; Vijayabaskar, V.; Kalaivani, S.; Volke, S.; Heinrich, G.; Dorschner, H.; Wagenknecht, U.; Bhowmick, A. K.
    Crosslinking of nitrile rubber by electron beam irradiation at elevated temperatures more
    Kautschuk Gummi Kunststoffe 60 (2007) 542-547


  149. Pospiech, D.; Korwitz, A.; Komber, H.; Voigt, D.; Jehnichen, D.; Müller, J.; Janke, A.; Hoffmann, T.; Kretzschmar, B.
    In situ synthesis of poly(ethylene terephthalate)/layered silicate nanocomposites by polycondensation more
    High Performance Polymers 19 (2007) 565-580


  150. Gottlieb, R.; Kaiser, C.; Gohs, U.; Arndt, K.-F.
    Temperature sensitive hydrogels based on hydroxypropylcellulose by high energy irraduation more
    Macromolecular Symposia 254 (2007) 361-369


  151. Pospiech, D.; Kretzschmar, B.; Willeke, M.; Leuteritz, A.; Jehnichen, D.; Janke, A.; Omastová, M.
    Exfoliation behavior of Montmorillonite modified by poly(oxyalkylene)s on polypropylene and the properties of the resulting nanocomposites more
    Polymer Engineering and Science 47 (2007) 1262-1271


  152. Burkert, S.; Schmidt, T.; Gohs, U.; Mönch, I.; Arndt, K.-F.
    Patterning of thin poly(N-vinyl pyrrolidone) films on silicon substrates by electron beam lithography more
    Journal of Applied Polymer Science 106 (2007) 534-539


  153. Vogel, R.; Tändler, B.; Voigt, D.; Jehnichen, D.; Häußler, L.; Peitzsch, L.; Brünig, H.
    Melt spinning of bacterial aliphatic polyester using reactive extrusion for improvement of crystallization more
    Macromolecular Bioscience 7 (2007) 820-828


  154. Golzar, M.; Brünig, H.; Mäder, E.
    Commingled hybrid yarn diameter ratio in continuous fiber-reinforced thermoplastic composites more
    Journal of Thermoplastic Composite Materials 20 (2007) 17-26


  155. Leuteritz, A.; Kretzschmar, B.; Pospiech, D.; Costa, F. R.; Wagenknecht, U.; Heinrich, G.
    Industry-relevant preparation, characterization, and applications of polymer nanocomposites more
    in: Polymeric nanostructures and their applications : Vol. 2: Applications, Hari Singh Nalwa, ed. (American Scienctific Publishers 2007) 2, 99-151


  156. Pötschke, P.; Kretzschmar, B.; Janke, A.
    Use of carbon nanotube filled polycarbonate in blends with montmorillonite filled polypropylene more
    Composite Science and Technology 67 (2007) 855-860


  157. Khonakdar, H. A.; Jafari, S.H.; Haghighi Als, A.; Wagenknecht, U.; Häußler, L.; Reuter, U.
    Thermal and mechanical properties of uncrosslinked and chemically crosslinked polyethylene/ethylene vinyl acetate copolymer blends more
    Journal of Applied Polymer Science 103 (2007) 3261-3270


  158. Hoffmann, T.; Pospiech, D.; Kretzschmar, B.; Reuter, U.; Häußler, L.; Eckert, F.; Perez Graterol, R.; Sandler, J.; Altstädt, V.
    Modification of polysulfones by carboxylic acids more
    High Performance Polymers 19 (2007) 48-61


  159. Mäder, E.; Rothe, C.; Brünig, H.; Leopold, T.
    Online spinning of commingled yarns - equipment and yarn modification by tailored fibre surfaces more
    Key Engineering Materials 334-335 (2007) 229-232


  160. Mrozik, B.; Hoffmann, G.; Cherif, C.; Walter, A.; Gelinsky, M.; Pompe, W.; Brünig, H.
    Neuartige textile Scaffolds für das Tissue Engineering / Novel textile scaffolds for tissue engineering more
    Technische Textilien/Technical Textiles 49 (2006) 198-199 / E150-E151


  161. Wagenknecht, U.; Wiessner, S.; Heinrich, G.; Michael, H.; Zichner, M.
    Effects of interface reactions in compatibilised ground tyre rubber polypropylene elastomic alloys more
    Plastics, Rubber and Composites 35 (2006) 393-400


  162. Beyreuther, R.; Brünig, H.
    Modelling and Application in Fibre and Textile Industry more
    Springer (2006) 365 : Ill., graph. Darst.


  163. Kelnar, I.; Scudla, J.; Kotek, J.; Kretzschmar, B.; Leuteritz, A.
    J-integral evaluation of PA6 nanocomposite with improved toughness more
    Polymer Testing 25 (2006) 697-700


  164. Costa, F. R.; Wagenknecht, U.; Jehnichen, D.; Heinrich, G.
    Nanocomposites based on polyethylene and Mg-Al layered double hydroxide: characterization of modified clay, morphological and rheological analysis of the nanocomposites more
    Plastics, Rubber and Composites 35 (2006) 139-148


  165. Costa, F. R.; Satapathy, B.K.; Wagenknecht, U.; Weidisch, R.; Heinrich, G.
    Morphology and fracture behaviour of polyethylene/Mg-Al layered double hydroxide (LDH) nanocomposites more
    European Polymer Journal 42 (2006) 2140-2152


  166. Vogel, R.; Tändler, B.; Häußler, L.; Jehnichen, D.; Brünig, H.
    Melt Spinning of Poly(3-hydroxybutyrate) Fibers for Tissue Engineering using a-Cyclodextrin/Polymer Inclusion Complexes as Nucleation Agent more
    Macromolecular Bioscience 6 (2006) 730-736


  167. Khonakdar, H. A.; Jafari, S.H.; Taheri, M.; Wagenknecht, U.; Jehnichen, D.; Häußler, L.
    Thermal and Wide Angle X-ray Analysis of Chemically and Radiation-Crosslinked Low and High Density Polethylene more
    Journal of Applied Polymer Science 100 (2006) 3264-3271


  168. Costa, F. R.; Wagenknecht, U.; Jehnichen, D.; Abdel-Goad, M.; Heinrich, G.
    Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. Part II. Rheological characterization more
    Polymer 47 (2006) 1649-1660


  169. Gahleitner, M.; Kretzschmar, B.; Van Vliet, G.; Devaux, J.; Pospiech, D.; Bernreitner, K.; Ingolic, E.
    Rheology/Morphology Interactions in Polypropylene/Polyamide-6 Nanocomposites more
    Rheologica Acta 45 (2006) 322-330


  170. Vogel, R.; Brünig, H.; Häußler, L.; Hatzikiriakos, S.G.
    Influence of Processing Aids on the Uniaxial Extensinal Behavior of Metallocene Polyethylenes more
    Polymer Engineering and Science 46 (2006) 735-742


  171. Messerschmidt, M.; Leuteritz, A.; Fleischmann, S.; Voit, B.
    Adjustable nanostructure in thin films of p-hydroxy-styrene polymers prepared by controlled radical polymerization more
    Polymer Preprints 47 (2006) 506


  172. Khonakdar, H. A.; Jafari, S.H.; Wagenknecht, U.; Jehnichen, D.
    Effect of electron-irradiation on cross-link density and crystalline structure of low- and high-density polyethylene more
    Radiation Physics and Chemistry 75 (2006) 78-86


  173. Gahleitner, M.; Kretzschmar, B.; Pospiech, D.; Ingolic, E.; Reichelt, N.; Bernreitner, K.
    Morphology and Mechanical Properties of Polypropylene/Polyamide 6 Nanocomposites Prepared by a Two-Step Melt-Compounding Process more
    Journal of Applied Polymer Science 100 (2006) 283-291


  174. Pötschke, P.; Brünig, H.; Janke, A.; Fischer, D.; Jehnichen, D.
    Orientation of multiwalled carbon nanotubes in composites with polycarbonate by melt spinning more
    Polymer 46 (2005) 10355-10363


  175. Gliesche, K.; Breier, A.; Schmack, G.
    Herstellung textiler Scaffolds mittels Sticktechnik more
    Biomaterialien 6 (2005) 155-159


  176. Costa, F. R.; Abdel-Goad, M.; Wagenknecht, U.; Heinrich, G.
    Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. I. Synthesis and characterization more
    Polymer 46 (2005) 4447-4453


  177. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Willeke, M.; Jehnichen, D.; Jentzsch, U.; Grundke, K.; Janke, A.
    Properties of Polypropylene Clay Nanocomposites modified with difunctional compounds more
    Composite Interfaces 12 (2005) 231-242


  178. Fahmi, A.; Brünig, H.; Weidisch, R.; Stamm, M.
    Organization of Designed Nanofibres Assembled in Filament via Flow Alignment more
    Macromolecular Materials and Engineering 290 (2005) 136-142


  179. Heinrich, G.; Costa, F. R.; Abdel-Goad, M.; Wagenknecht, U.; Lauke, B.; Härtel, V.; Tschimmel, J.; Klüppel, M.; Sviskov, A.L.
    Structural Kinetics in Filled Elastomers and PE/LDH Composites more
    Kautschuk Gummi Kunststoffe 58 (2005) 163-167


  180. Khonakdar, H. A.; Jafari, S.H.; Yavari, A.; Asadinezhad, A.; Wagenknecht, U.
    Rheology, morphology and estimation of interfacial tension of LDPE/EVA and HDPE/EVA blends more
    Polymer Bulletin 54 (2005) 75-84


  181. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Willeke, M.; Jehnichen, D.; Jentzsch, U.; Grundke, K.; Janke, A.
    Polypropylene-Clay Nanocomposites: Comparison of Different Layered Silicates more
    Macromolecular Symposia 221 (2005) 53-61


  182. Wagenknecht, U.; Steglich, S.; Wiessner, S.; Michael, H.
    Rubber Powder - A Perspective Filler of Thermoplastics more
    Macromolecular Symposia 221 (2005) 237-245


  183. Fischer, D.; Pötschke, P.; Brünig, H.; Janke, A.
    Investigation of the Orientation in Composite Fibers of Polycarbonate with Multiwalled Carbon Nanotubes by Raman Microscopy more
    Macromolecular Symposia 230 (2005) 167-172


  184. Golzar, M.; Beyreuther, R.; Brünig, H.; Tändler, B.; Vogel, R.
    Online Temperature Measurement and Simultaneous Diameter Estimation of Fibres by Thermography of the Spinnline in the Melt Spinning Process more
    Advances in Polymer Technology 23 (2004) 176-185


  185. Khonakdar, H. A.; Wagenknecht, U.; Jafari, S.H.; Häßler, R.; Eslami, H.
    Dynamic Mechanical Properties and Morphology of Polyethylene/Ethylene Vinyl Acetate Copolymer Blends more
    Advances in Polymer Technology 23 (2004) 304-315


  186. Pospiech, D.; Kretzschmar, B.; Leuteritz, A.; Willeke, M.; Jehnichen, D.; Janke, A.; Grundke, K.
    Nanocomposites mit natürlichen Schichtsilikaten more
    Wissenschaftliche Beiträge der Fachhochschule Lausitz III (2004)


  187. Petzold, G.; Geißler, U.; Smolka, N.; Schwarz, S.
    Influence of humic acid on the flocculation of clay more
    Colloid and Polymer Science 282 (2004) 670-676


  188. Khonakdar, H. A.; Morshedian, J.; Wagenknecht, U.; Jafari, S.H.
    An investigation of chemical crosslinking effect on properties of high-density polyethylene more
    Polymer 44 (2003) 4301-4309


  189. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Willeke, M.; Jehnichen, D.; Jentzsch, U.; Grundke, K.; Janke, A.
    Progress in Polypropylene-Nanocomposite Development more
    Advanced Engineering Materials 5 (2003) 678-681


  190. Khonakdar, H. A.; Morshedian, J.; Mehrabzadeh, M.; Wagenknecht, U.; Jafari, S.H.
    Thermal and shrinkage Behaviour of stretched peroxide-crosslinked high-density polyethylene more
    European Polymer Journal 39 (2003) 1729-1734


  191. Vogel, R.; Hatzikiriakos, S.G.; Brünig, H.; Tändler, B.; Golzar, M.
    Improved Spinnability of Metallocene Polyethylenes by Using Processing Aids more
    International Polymer Processing 18 (2003) 67-73


  192. Brünig, H.; Tändler, B.
    A new Method to Determine the Filament Force Tension within the Fibre Formation Zone more
    International Polymer Processing 18 (2003) 41-45


  193. Brünig, H.; Beyreuther, R.; Vogel, R.; Tändler, B.
    Melt spinning of fine and ultra-fine PEEK-filaments more
    Journal of Materials Science 38 (2003) 2149-2153


  194. Wagenknecht, U.; Kretzschmar, B.; Reinhardt, G.
    Investigations of Fire Retardant Properties of Polypropylene-Clay-Nanocomposites more
    Macromolecular Symposia 194 (2003) 207-212


  195. Jenschke, W.; Dorschner, H.; Arnold, D.; Stephan, M.; Brünig, H.
    Schnell - Heizapparatur für die strahlenchemische Modifizierung von Polymerfolien im Schmelzezustand more
    Technisches Messen 70 (2003) 323-328


  196. Pospiech, D.; Jehnichen, D.; Kretzschmar, B.; Leuteritz, A.; Grundke, K.; Janke, A.
    Investigation of the Exfoliation Process in Polypropylene Nanocomposites more
    Macromolecular Chemistry and Physics 204 (2003) F48-F50


  197. Kravtsov, A.; Brünig, H.; Zotov, S.V.
    Analysis of the polarization state of melt-spun polypropylene fibers more
    Journal of Materials Processing Technology 124 (2002) 160-165


  198. Leuteritz, A.; Pospiech, D.; Kretzschmar, B.; Jehnichen, D.; Heger, K.; Jentzsch, U.; Wagenknecht, U.
    Design of interface in polypropylene-clay nanocomposites more
    Polymeric Materials: Science and Engineering 87 (2002) 297-299


  199. Leuteritz, A.; Messerschmidt, M.; Voit, B.; Yin, M.; Krause, T.; Habicher, W.D.
    Synthesis of orthogonally protected narrowly distributed block copolymers of hydroxystyrene more
    Polymer Preprints 43 (2002) 283-284


  200. Beyreuther, R.; Brünig, H.; Vogel, R.
    Preferable Filament Diameter Ratios of Hybrid Yarn Components for Optimized Longfiber Reinforced Thermoplastics more
    International Polymer Processing 17 (2002) 153-157


  201. Datsyuk, V.; Häußler, L.; Wagenknecht, U.; Voronov, S.; Tokarev, V.; Bednarska, O.
    Polypropylene/Polyperoxide Interaction in the Melt Phase more
    Macromolecular Symposia 164 (2001) 357-367


  202. Petzold, G.; Lunkwitz, K.; Geißler, U.; Smolka, N.
    Effektives Flockungsmittelsystem zur Klärung anorganischer Trüben more
    WLB Wasser, Luft und Boden 45 (2001)


  203. Wolf, D.; Wagenknecht, U.; Kretzschmar, B.
    Interface Controlled Materials
    Nanocomposites of the Polyolefine Clay Type - New Products Using a Novel Compounding Technique     more
    Wiley-VCH (2000) 189-193


  204. Geißler, U.; Kunze, K.; Kretzschmar, B.; Lunkwitz, K.
    Gleitlagerwerkstoffe auf der Basis von POM/PTFE-Compounds more
    Tribologie und Schmierungstechnik 47 (2000) 48-50


  205. Kravtsov, A.; Brünig, H.; Zhandarov, S.; Beyreuther, R.
    The Electret Effect in Polypropylene Fibers Treated in a Corona Discharge more
    Advances in Polymer Technology 19 (2000) 312-316


  206. Kravtsov, A.; Brünig, H.
    Features of electret charge formation in polypropylene fibers more
    Chimiceskie volokna (2000) 36-41


  207. Voronov, S.; Tokarev, V.; Datsyuk, V.; Seredyuk, V.; Bednarska, O.; Oduola, K.; Adler, H.; Puschke, C.; Pich, A.; Wagenknecht, U.
    Polyperoxidic Surfactants for Interface Modification and Compatibilization of Polymer Colloidal Systems. II. Design of Compatibilizing Layers more
    Journal of Applied Polymer Science 76 (2000) 1228-1239


 
Publications
Publikationen

Departments

Processing

News

Innovative Materialkonzepte für die Luftfahrtindustrie
Juli 11: Prof. Dirk Kuckling, Controlled Synthesis of Functional Smart Materials.
Juli 11: Steven Donaldson, Development of a general interaction potential for hydrophobic and hydrophilic interactions.
6th International Conference on Carbon NanoParticle Based Composites
8th Workshop Ellipsometry