Abteilungen und Gruppen > Mechanik und Struktur > Publikationen

Publikationen

Zeitschriftenveröffentlichungen

  1. Zhandarov, S.; Mäder, E.
    Estimation of the local interfacial strength parameters of carbon nanotube fibers in an epoxy matrix from a microbond test data mehr
    Carbon 86 (2015) 54-57


  2. Lauke, B.
    Plastic yielding contribution to fracture toughness of polymers modified with rubber and inorganic fillers mehr
    Journal of Materials Science 50 (2015) 2178-2188


  3. Hintze, C.; Stocek, R.; Horst, Th.; Jurk, R.; Wießner, S.; Heinrich, G.
    Dynamic behavior of short aramid fiber-filled elastomer composites mehr
    Polymer Engineering and Science 54 (2014) 2958-2964


  4. Popa, C. M.; Fleischhauer, R.; Schneider, K.; Kaliske, M.
    Formulation and implementation of a constitutive model for semicrystalline polymers mehr
    International Journal of Plasticity 61 (2014) 128-156


  5. Brüning, K.; Schneider, K.; Heinrich, G.
    Natural rubber strength - Self-reinforcement of natural rubber in truck tires mehr
    Tire Technology International (2014) 35-37


  6. Heinrich, G.; Schneider, K.; Calabrò, R.; Lombardi, R.; Kipscholl, C.; Horst, Th.; Schulze, A.; Gorelova, S.
    Tear fatigue analysis : Fracture behaviour of elastomers under dynamic biaxial loading conditions mehr
    Tire Technology International (2014) 30-32


  7. Hintze, C.; Boldt, R.; Wießner, S.; Heinrich, G.
    Short aramid fiber reinforced TPU composites: Processing, morphology and properties mehr
    Kautschuk Gummi Kunststoffe 67 (2014) 42-46


  8. Chen, J.; Schneider, K.; Kretzschmar, B.; Heinrich, G.
    Nucleation and growth behavior of ß-nucleated iPP during shear induced crystallization investigated by in-situ synchrotron WAXS and SAXS mehr
    Polymer 55 (2014) 5477-5487


  9. Bartusch, M.; Hetti, M.; Pospiech, D.; Riedel, M.; Meyer, J.; Toher, C.; Neu, V.; Gazuz, I.; Shagolsem, L.; Sommer, J.-U.; Hund, R.-D.; Cherif, C.; Moresco, F.; Cuniberti, G.; Voit, B.
    Innovative molecular design for a volume oriented component diagnostic: Modified magnetic nanoparticles on high performance yarns for smart textiles mehr
    Advanced Engineering Materials 16 (2014) 1276-1283


  10. Vogel, R.; Boldt, R.; Vucak, M.; Häußler, L.
    Shear-induced shish-kebab structures in isotactic polypropylene using acicular precipitated calcium carbonate as whisker mehr
    Polymer Engineering and Science 54 (2014) 2057-2063


  11. Gazuz, I.; Sommer, J.-U.
    Evidence of random copolymer adsorption at fluctuating selective interfaces from Monte-Carlo simulation studies mehr
    Soft Matter 10 (2014) 7347-7255


  12. Grenzer, M.; Toshchevikov, V.; Gazuz, I.; Petry, F.; Westermann, S.; Heinrich, G.
    Multiscale approach to dynamic-mechanical analysis of unfilled rubbers mehr
    Macromolecules 47 (2014) 4813-4823


  13. Zhandarov, S.; Mäder, E.
    An alternative method of determining the local interfacial shear strength from force-displacement curves in the pull-out and microbond tests mehr
    International Journal of Adhesion and Adhesives 55 (2014) 37-42


  14. Stribeck, N.; Schneider, K.; Zeinolebadi, A.; Li, X.; Sanporean, C.-G.; Vuluga, Z.; Iancu, S.; Duldner, M.; Santoro, G.; Roth, S.V.
    Studying nanostructure gradients in injection-molded polypropylene/montmorillonite composites studied by microbeam small-angle x-ray scattering mehr
    Science and Technology of Advanced Materials 15 (2014) 015004 (11pp)


  15. Liu, G.; Schneider, K.; Zheng, L.; Zhang, X.; Li, C.; Stamm, M.; Wang, D.
    Stretching induced phase separation in poly(vinylidene fluoride)/poly(butylene succinate) blends studied by in-situ X-ray scattering mehr
    Polymer 55 (2014) 2588-2596


  16. Hinüber, C.; Chwalek, K.; Pan-Montojo, F.-J.; Nitschke, M.; Vogel, R.; Brünig, H.; Heinrich, G.; Werner, C.
    Hierarchically structured nerve guidance channels based on poly-3-hydroxybutyrate enhance oriented axonal outgrowth mehr
    Acta Biomaterialia 10 (2014) 2065-2095


  17. Schneider, K.; Schulze, A.; Heinrich, G.; Lombardi, R.; Calabro, R.; Kippscholl, C.; Horst, Th.
    Charakterisierung und Versagensverhalten von Elastomeren bei dynamischer biaxialer Belastung mehr
    Kautschuk Gummi Kunststoffe (2014) 48-52


  18. Lehmann, D.; Bräuer, M.; Gedan-Smolka, M.; Kühnert, I.; Schneider, K.
    Grenzflächenreaktives Spritzgießen mehr
    Konstruktion (2014) IW5 - IW6


  19. Bräuer, M.; Edelmann, M.; Kühnert, I.; Lappan, U.; Lehmann, D.; Schneider, K.; Tuschla, M.
    Spritzgießen von Mehrkomponentenverbunden : Neue Verbunde mit dem Hochleistungskunststoff PPS mehr
    Kautschuk Gummi Kunststoffe 67 (2014) 22-32


  20. Morozov, I.; Lauke, B.; Tada, T.
    Structural modelling and stiffness of filled elastomers mehr
    Composites: Part B 60 (2014) 555-560


  21. Hintze, C.; Borin, D.; Ivaneiko, D.; Toshchevikov, V.; Grenzer, M.; Heinrich, G.
    Soft magnetic elastomers with controllable stiffness: experiments and modelling mehr
    Kautschuk Gummi Kunststoffe 67 (2014) 53-59


  22. Uzhegova, N. I.; Sviskov, A.L.; Lauke, B.; Heinrich, G.
    The influence of capillary effect on atomic force microscopy measurements mehr
    International Journal of Engineering Science 75 (2014) 67-78


  23. Kaminski, M.; Lauke, B.
    Probabilistic homogenization of polymers filled with rubber particles mehr
    Computational Materials Science 82 (2014) 483-496


  24. Rentsch, C.; Schneiders, W.; Hess, R.; Rentsch, B.; Bernhardt, R.; Spekl, K.; Schneider, K.; Scharnweber, D.; Biewener, A.; Rammelt, S.
    Healing properties of surface-coated polycaprolactone-co-lactide scaffolds - a pilot study in sheep mehr
    Journal of Biomaterials Applications 28 (2014) 654-666


  25. Zhandarov, S.; Mäder, E.
    Analysis of a pull-out test with real specimen geometry. Part II: the effect of meniscus mehr
    Journal of Adhesion Science and Technology 28 (2014) 65-84


  26. Botelho, E.C.; Costa, M. L.; Eichert, P.; Burkhart, T.; Lauke, B.
    Viscoelastic behavior of phenolic resin with multiwalled carbon nanotubes mehr
    Materials Research 16 (2013) 713-720


  27. Hölzer, S.; Ganß, M.; Schneider, K.; Knoll, K.; Weidisch, R.
    Deformation mechanisms in lamellar S-S/B-S triblock copolymers mehr
    European Polymer Journal 49 (2013) 261-269


  28. Hintze, C.; Heinrich, G.; Wießner, S.; Wagenknecht, U.
    Effect of processing parameters on morphology and performance characteristics of aramid fibre-reinforced elastomer composites mehr
    International Polymer Science And Technology 40 (2013) T/1-T/7


  29. Hintze, C.; Shirazi, M.; Wießner, S.; Talma, A. G.; Heinrich, G.; Noordermeer, J. W. M.
    Influence of fiber type and coating on the composite properties of EPDM compounds reinforced with short aramid fibers mehr
    Rubber Chemistry and Technology 86 (2013) 579-590


  30. Kaminski, M.; Lauke, B.
    Parameter sensitivity and probabilistic analysis of the elastic homogenized properties for rubber filled polymers mehr
    Computational Materials Science 93 (2013) 411-440


  31. Morozov, I.; Lauke, B.; Heinrich, G.
    AFM investigations of structure and mechanical properties of cracks in carbon black filled and unfilled rubbers mehr
    Kautschuk Gummi Kunststoffe (2013) 71-76


  32. Brüning, K.; Schneider, K.; Roth, S.V.; Heinrich, G.
    Strain-induced crystallization around a crack tip in natural rubber under dynamic load mehr
    Polymer 54 (2013) 6200-6205


  33. Komar, L. A.; Morozov, I.; Lauke, B.
    Modelling of the behavior of elastomers filled by rigid particles with interfacial layers mehr
    CRC Press (2013)


  34. Brüning, K.; Heinrich, G.; Schneider, K.
    Short-time behavior of strain-induced crystallization in natural rubber mehr
    in: Constitutive Models in Rubbers VIII, Nere G.-N.; Asier A., ed. (CRC Press 2013) , 457-460


  35. Hintze, C.
    Influence of processing induced morphology on mechanical properties of short aramid fibre filled elastomers composites mehr
    TUDpress (2013) XIII, 139 : Ill., graph. Darst.


  36. Lauke, B.
    Contribution of matrix yielding energy to the crack resistance of particle reinforced composites mehr
    Composites Science and Technology 86 (2013) 135-141


  37. Vogel, R.; Boldt, R.; Vucak, M.; Nover, C.; Häußler, L.; Brünig, H.
    Acicular precipitated calcium carbonate as inorganic whisker for reinforcing of polypropylene fibers mehr
    e-Polymers 28 (2013) 1-10


  38. Brüning, K.; Schneider, K.; Heinrich, G.
    In-situ structural characterization of rubber during deformation and fracture mehr
    in: Fracture Mechanics and Statistical Mechanics of Reinforced Elastomeric Blends, Grellmann, W; Heinrich, G; Kaliske, M; Klüppel, M; Schneider, K; Vilgis, T, ed. (Springer 2013) 70, 43-80


  39. Heinrich, G.; Schneider, K.
    Fracture mechanics and statistical mechanics of reinforced elastomeric blends mehr
    in: , Grellmann, W; Heinrich, G; Kaliske, M; Klüppel, M; Schneider, K; Vilgis, T, ed. (Springer 2013) 70, 303 : Ill., graph. Darst.


  40. Lauke, B.
    Effect of particle size distribution on debonding energy and crack resistance of polymer composites mehr
    Computational Materials Science 77 (2013) 73-60


  41. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of `dry liquids` for post-processing crosslinking reactions mehr
    RFP Rubber Fibres Plastics for China (2013) 18-21


  42. Hintze, C.; Boldt, R.; Wießner, S.; Heinrich, G.
    Influence of processing on morphology in short aramid fiber reinforced elastomer compounds mehr
    Journal of Applied Polymer Science 130 (2013) 1682-1690


  43. Zhandarov, S.; Mäder, E.
    Analysis of a pull-out test with real specimen geometry. Part I: matrix droplet in the shape of a spherical segment mehr
    Journal of Adhesion Science and Technology 27 (2013) 430-465


  44. Gazuz, I.; Fuchs, M.
    Nonlinear microrheology of dense colloidal suspensions: a mode-coupling theory mehr
    Physical Review / E 87 (2013) 032304


  45. Stocchi, A.; Lauke, B.; Giannotti, M. I.; Vázquez, A.; Bernal, C.
    Tensile response and fracture and failure behavior of jute fabrics-flyash-vinylester hybrid composites mehr
    Fibers and Polymers 14 (2013) 285-291


  46. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of "dry liquids" for post-processing crosslinking reactions mehr
    Rubber Fibres Plastics International : RFP 8 (2013) 36-39


  47. Schneider, K.; Häußler, L.; Roth, S.V.
    Tailoring of morphology and mechanical properties of isotactic polypropylene by processing mehr
    in: Polypropylene, Dogan, F., ed. (InTech 2013) , Chapter 24, 459-482


  48. Scheffler, C.; Zhandarov, S.; Jenschke, W.; Mäder, E.
    Poly(vinal alcohol) fiber reinforced concrete: investigation of strain rate dependen interphase behavior with single fiber pullout test under quasi-static and high rate loading mehr
    Journal of Adhesion Science and Technology 27 (2013) 385-402


  49. Lauke, B.; Fu, S.-Y.
    Aspects of fracture toughness modelling of particle filled polymer composites mehr
    Composites: Part B 45 (2013) 1569-1574


  50. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Gefälltes Calciumcarbonat als Trägerpartikel von Reagenzien für Vernetzungsreaktionen mehr
    GAK : Gummi Fasern Kunststoffe 65 (2012) 754-757


  51. Botelho, E.C.; Costa, M. L.; Edwards, E. R.; Burkhart, T.; Lauke, B.
    Effects of carbon nanotube fillers dispersion on mechanical behavior of phenolic/carbon nanotube nanocomposite mehr
    Journal of Materials Research 27 (2012) 2342-2351


  52. Dutschk, V.; Chen, J.; Petzold, G.; Vogel, R.; Clausse, D.; Ravera, F.; Liggieri, L.
    The role of emulsifier in stabilization of emulsions containing colloidal alumina particles mehr
    Colloids and Surfaces A: Physicochemical and Engineering Aspects 413 (2012) 239-247


  53. Morozov, I.; Lauke, B.; Heinrich, G.
    Microstructural analysis of carbon black filled rubbers by atomic force microcopy and computer simulation techniques mehr
    Plastics, Rubber and Composites : Processing and Applications 41 (2012) 285-289


  54. Brüning, K.; Schneider, K.; Roth, S.V.; Heinrich, G.
    Kinetics of strain-induced crystallization in natural rubber studied by WAXD: Dynamic and impact tensile experiments mehr
    Macromolecules 45 (2012) 7914-7919


  55. Fleischhauer, R.; Dal, H.; Kaliske, M.; Schneider, K.
    A constitutive model for finite deformation of amorphous polymers mehr
    International Journal of Mechanical Science 65 (2012) 48-63


  56. Hintze, C.; Wießner, S.; Wagenknecht, U.; Heinrich, G.
    Einfluss von Verarbeitungsparametern auf Morphologie und Anwendungseigenschaften von aramidkurzfaserverstärkten Elastomercomposites mehr
    GAK : Gummi Fasern Kunststoffe 65 (2012) 562-567


  57. Brüning, K.; Schneider, K.; Heinrich, G.
    Deformation and orientation in filled rubbers on the nano- and microscale studied by x-ray scattering mehr
    Journal of Polymer Science: Part B: Polymer Physics 50 (2012) 1728-1732


  58. Li, X.; Kretzschmar, B.; Janke, A.; Häußler, L.; Schneider, K.; Stamm, M.
    Investigation of structure and mechanical behavior pf polyamide 6/ZnO and polyamide 6/Al2O3 nanocomposites mehr
    Advanced Materials Research 557-559 (2012) 272-276


  59. Morozov, I.; Lauke, B.; Heinrich, G.
    Quantitative microstructural investigation of carbon-black-filled rubbers by AFM mehr
    Rubber Chemistry and Technology 85 (2012) 244-263


  60. Ganß, M.; Staudinger, U.; Thunga, M.; Knoll, K.; Schneider, K.; Stamm, M.; Weidisch, R.
    Influence of S/B middle block composition on the morphology and the mechanical response of polystyrene-poly(styrene-co-butadiene)-polystyrene triblock copolymers mehr
    Polymer 53 (2012) 2085-2098


  61. Borin, D.; Günther, D.; Hintze, C.; Heinrich, G.; Odenbach, S.
    The level of cross-linking and the structure of anisotropic magnetorheological elastomers mehr
    Journal of Magnetism and Magnetic Materials 324 (2012) 3452–3454


  62. Freudenberg, U.; Sommer, J.-U.; Levental, K.; Welzel, P; Zieris, A.; Chwalek, K.; Schneider, K.; Prokoph, S.; Prewitz, M.; Dockhorn, R.; Werner, C.
    Using Mean Field Theory to Guide Biofunctional Materials Design mehr
    Advanced Functional Materials 22 (2012) 1391-1398


  63. Morozov, I.; Lauke, B.; Heinrich, G.
    Microstructural analysis of carbon black filled rubbers by atomic force microcopy and computer simulation techniques mehr
    in: Constitutive Models for Rubber VII, Jerrams & Murphy, ed. (Taylor & Francis Group 2012) , 173-175


  64. Kaminski, M.; Lauke, B.
    Probabilistic and stochastic analysis of the effective properties for the particle reinforced elastomers mehr
    Computational Materials Science 56 (2012) 147-160


  65. Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L.
    Precipitated calcium carbonate as carrier particles of 'dry liquids' for post-processing crosslinking reactions mehr
    e-Polymers no. 023 (2012) 9 Seiten, http://www.e-polymers.org


  66. Gube, A.; Jakisch, L.; Häußler, L.; Schneider, K.; Voit, B.; Böhme, F.
    Alternating block copolymers based on polyamide-12 and polycaprolactone mehr
    Polymer International 61 (2012) 157-162


  67. Zhang, X.; Schneider, K.; Liu, G.; Chen, J.; Brüning, K.; Wang, D.; Stamm, M.
    Deformation-mediated superstructures and cavitation of poly(L-lactide): In-situ small-angle X-ray scattering study mehr
    Polymer 53 (2012) 648-656


  68. Lauke, B.; Barroso, A.
    Notched-butt test for the determination of adhesion strength at bimaterial interfaces mehr
    Composite Interfaces 18 (2011) 661-669


  69. Schlegel, R.; Duan, Y.; Weidisch, R.; Hölzer, S.; Schneider, K.; Stamm, M.; Uhrig, D.; Mays, J.W.; Heinrich, G.; Hadjichristidis, N.
    High-strain-induced deformation mechanisms in block - graft and multigraft copolymers mehr
    Macromolecules 44 (2011) 9374-9383


  70. Zhang, X.; Schneider, K.; Liu, G.; Chen, J.; Brüning, K.; Wang, D.; Stamm, M.
    Structure variation of tensile-deformed amorphous poly(L-lactic acid): Effects of deformation rate and strain mehr
    Polymer 52 (2011) 4141-4149


  71. Gnann, M. V.; Gazuz, I.; Puertas, A. M.; Fuchs, M.; Voigtmann, Th.
    Schematic models for active nonlinear microrheology mehr
    Soft Matter 7 (2011) 1390-1396


  72. Chen, J.; Vogel, R.; Werner, S.; Heinrich, G.; Clausse, D.; Dutschk, V.
    Influence of the particle type on the rheological behavior of pickering emulsions mehr
    Colloids and Surfaces A: Physicochemical and Engineering Aspects 382 (2011)


  73. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Heinrich, G.; Werner, C.
    Hollow fibers made from a poly(3-hydroxybutyrate)/poly-e-caprolactone blend mehr
    eXPRESS Polymer Letters 5 (2011) 643-652


  74. Lauke, B.
    Doubly-curved interfaces for adhesion strength testing mehr
    Composite Interfaces 18 (2011) 121-133


  75. Morozov, I.; Lauke, B.; Heinrich, G.
    A novel method of quantitative characterization of filled rubber structures by AFM mehr
    Kautschuk Gummi Kunststoffe 64 (2011) 24-27


  76. Ghosh, A.; Banerjee, S.; Komber, H.; Häußler, L.; Schneider, K.; Voit, B.
    New semifluorinated siloxane-grafted copolyimides: Synthesis and comparison with their linear analogs mehr
    Macromolecular Materials and Engineering 296 (2011) 391-400


  77. Horecha, M.; Senkovsky, V.; Schneider, K.; Kiriy, A.; Stamm, M.
    Swelling behaviour of PNIPAM-polyisoprene core-shell microgels at surface mehr
    Colloid and Polymer Science 289 (2011) 603-612


  78. Komar, L. A.; Lauke, B.; Heinrich, G.
    Modelling of formation of interphase layers in the filled elastomeric materials. - In kyrill.Schr. mehr
    Mekhanika kompozitsionnykh materialov i konstruktsii = Composite mechanics and design 16 (2010) 73-83


  79. Komar, L. A.; Lauke, B.; Heinrich, G.
    Modelling of the formation of interface layers in nanofilled elastomers mehr
    Nanomechanics Science and Technology 1 (2010) 211-222


  80. Pelevin, A.; Svistkov, A.; Adamov, A. A.; Lauke, B.; Heinrich, G.
    The algorithm of searching for constants in a model of the mechanical behavior of rubber mehr
    Composites : mechanics, computations, applications ; an international journal 1 (2010) 1-19


  81. Kaminski, M.; Lauke, B.
    Sensitivity analysis and stochastic modelling of the effective properties for reinforced elastomers mehr
    in: Stochastic Control, Myers, Ch., ed. (Sciyo 2010) , Chapter 23, 411-436


  82. Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Werner, C.
    Hollow poly(3-hydroxybutyrate) fibers produced by melt spinning mehr
    Macromolecular Materials and Engineering 295 (2010) 585-594


  83. Schneider, K.
    Investigation of structural changes of semi-crystalline polymers during deformation by synchrotron X-ray scattering mehr
    Journal of Polymer Science: Part B: Polymer Physics 48 (2010) 1574-1586


  84. Bräuer, M.; Wießner, S.; Edelmann, M.; Gedan-Smolka, M.; Hupfer, B.; Lehmann, D.; Nagel, J.; Schneider, K.
    Verbundspritzgießen auf pulverlackierte Bleche mehr
    Kautschuk Gummi Kunststoffe 63 (2010) 12-19


  85. Morozov, I.; Lauke, B.; Heinrich, G.
    A new structural model of carbon black framework in rubbers mehr
    Computational Materials Science 47 (2010) 817-825


  86. Pilling, E.; Eckelt, U.; Loukota, R.; Schneider, K.; Stadlinger, B.
    Comparative evaluation of ten different condylar base fracture osteosynthesis techniques mehr
    British Journal of Oral and Maxillofacial Surgery 48 (2010) 527-531


  87. Lauke, B.; Morozov, I.
    Modeling of structure evolution of filled elastomers under uniaxial elongation mehr
    International Journal of Multiscale Computational Engineering 7 (2009) 251-261


  88. Morozov, I.; Lauke, B.; Heinrich, G.
    Quantitative structural analysis of filled rubber by AFM mehr
    in: Constitutive Models for Rubber VI, Heinrich, G.;  Kaliske, M.; Lion, A.;  Reese, S., ed. (CRC Press 2009) , 473-488


  89. Svistkov, A.; Pelevin, A.; Adamov, A. A.; Lauke, B.; Heinrich, G.
    Structural-phenomenological modelling of softening and recovery of mechanical properties of elastomer nanocomposite mehr
    in: Constitutive Models for Rubber VI, Heinrich, G.;  Kaliske, M.; Lion, A.;  Reese, S., ed. (CRC Press 2009) , 85-90


  90. Pelevin, A.; Lauke, B.; Heinrich, G.; Svistkov, A.; Adamov, A. A.
    Algorithm of constant definition for a visco-elastic rubber model based cyclic experiments, stress relaxation and creep data mehr
    in: Constitutive Models for Rubber VI, Heinrich, G.;  Kaliske, M.; Lion, A.;  Reese, S., ed. (CRC Press 2009) , 79-84


  91. Komar, L. A.; Svistkov, A.; Heinrich, G.; Lauke, B.
    Changes in the orientation state of polymer molecules in the space between filler particles mehr
    in: Constitutive Models for Rubber VI, Heinrich, G.;  Kaliske, M.; Lion, A.;  Reese, S., ed. (CRC Press 2009) , 413-416


  92. Nevalainen, K.; Suihkonen, R.; Eteläaho, P.; Vuorinen, J.; Järvelä, P.; Isomäki, N.; Hintze, C.; Leskelä, M.
    Mechanical and tribological property comparison of melt-compounded nanocomposites of atomic-layer-deposition-coated polyamide particles and commercial nanofillers mehr
    Journal of Vacuum Science and Technology : A. Vacuum, Surfaces, & Films 27 (2009) 929-936


  93. Duan, Y.; Thunga, M.; Schlegel, R.; Schneider, K.; Rettler, E.; Weidisch, R.; Siesler, H.W.; Stamm, M.; Mays, J.W.; Hadjichristidis, N.
    Morphology and deformation mechanisms and tensile properties of tetrafunctional multigraft copolymers mehr
    Macromolecules 42 (2009) 4155-4164


  94. Fan, Z.; Jähnichen, K.; Desbois, P.; Häußler, L.; Vogel, R.; Voit, B.
    Blends of different linear polyamides with hyperbranched aromatic AB2 and A2+B3 polyesters mehr
    Journal of Polymer Science: Part A: Polymer Chemistry 47 (2009) 3558-3572


  95. Ghosh, A.; Banerjee, S.; Komber, H.; Schneider, K.; Häußler, L.; Voit, B.
    Synthesis and characterization of fluorinated poly(imide siloxane) block copolymers mehr
    European Polymer Journal 45 (2009) 1561-1569


  96. Schneider, K.; Zafeiropoulos, N.E.; Stamm, M.
    In situ investigation of structural changes during deformation and fracture of polymers by synchrotron-SAXS and WAXS mehr
    Advanced Engineering Materials 11 (2009) 502-506


  97. Svistkov, A.; Lauke, B.
    Differential constitutive equations of incompressible media with finite deformations mehr
    Journal of Applied Mechanics and Technical Physics 50 (2009) 493-503


  98. Fu, S.-Y.; Mai, Y.W.; Lauke, B.
    Science and Engineering of Short Fiber Reinforced Polymers mehr
    in: Science and engineering of short fibre reinforced polymer composites, Fu, Lauke, Mai, ed. (Woodhead Publishing Limited 2009) ,


  99. Vyas, M. K.; Nandan, B.; Schneider, K.; Stamm, M.
    Nanowear studies in chemically heterogeneous responsive polymeric brushes by surface force microscopy mehr
    European Polymer Journal 45 (2009) 1367-1376


  100. Kondyurin, A.V.; Lauke, B.; Vogel, R.; Netchitailo, G. S.
    Cinetics of photopolymerization of polymer composites under model conditions of space flights ( in Russ.) mehr
    Plasticeskie massy (2009) 50-55


  101. Vyas, M. K.; Nandan, B.; Schneider, K.; Stamm, M.
    Nanowear studies in reversibly switchable polystyrene-poly(acrylic acid) mixed brushes mehr
    Journal of Colloid and Interface Science 328 (2008) 58-66


  102. Nevalainen, K.; Hintze, C.; Suihkonen, R.; Sundelin, J.; Eteläaho, P.; Vuorinen, J.; Järvelä, P.; Isomäki, N.
    Thermal and rheological behaviour comparison of melt-compounded nanocomposites of atomic-layer-deposition-coated polyamide particles and commercial nanofillers mehr
    Journal of Nanostructured Polymers and Nanocomposites 4 (2008) 128-138


  103. Lauke, B.
    On the effect of particle size on fracture toughness of polymer composites mehr
    Composites Science and Technology 68 (2008) 3365-3372


  104. Figiel, L.; Lauke, B.; Kaminski, M.
    Sensitivity analysis in a fatigue delamination problem of an elastic two layer composite mehr
    Engineering Transactions 59 (2008) 65-87


  105. Vyas, M. K.; Schneider, K.; Nandan, B.; Stamm, M.
    Switching of friction by binary polymer brushes mehr
    Soft Matter 4 (2008) 1024-1032


  106. Fu, S.-Y.; Feng, Xi-Qiao; Lauke, B.; Mai, Y.W.
    Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate polymer composites mehr
    Composites: Part B 39 (2008) 933-961


  107. Svistkov, A.; Lauke, B.
    Structural-phenomenological simulation of the mechanical behavior of rubbers. In kyrill. Schrift mehr
    Vysokomol. Soedinenija, Ser. A 50 (2008) 892-902


  108. Svistkov, A.; Komar, L. A.; Heinrich, G.; Lauke, B.
    Modeling of the formation of oriented-polymer layers at filler particles in polymer nanocomposites. - In kyrill. Schrift mehr
    Vysokomol. Soedinenija, Ser. A 50 (2008) 903-910


  109. Li, X.; Schneider, K.; Kretzschmar, B.; Stamm, M.
    Deformation behavior of PP and PP/ZnO Nanocomposites as studied by SAXS and WAXS mehr
    Macromolecules 41 (2008) 4371-4379


  110. Duan, Y.; Rettler, E.; Schneider, K.; Schlegel, R.; Thunga, M.; Weidisch, R.; Siesler, H.W.; Stamm, M.; Mays, J.W.; Hadjichristidis, N.
    Deformation behavior of sphere-forming trifunctional multigraft copolymer mehr
    Macromolecules 41 (2008) 4565-4568


  111. Vogel, R.; Voigt, D.; Tändler, B.; Gohs, U.; Häußler, L.
    Melt spinning of poly(3-hydroxybutyrate) for tissue engineering using electron-beam irradiated poly(3-hydroxybutyrate) as nucleation agent mehr
    Macromolecular Bioscience 8 (2008) 426-431


  112. Svistkov, A.; Lauke, B.
    Structural-phenomenological simulation of the mechanical behavior of rubbers mehr
    Polymer Science / Series A 50 (2008) 591-599


  113. Svistkov, A.; Komar, L. A.; Heinrich, G.; Lauke, B.
    Modeling of the formation of oriented-polymer layers at filler particles in polymer nanocomposites mehr
    Polymer Science / Series A 50 (2008) 600-606


  114. Schneider, K.
    Mechanical properties of polymers at surfaces and interfaces mehr
    in: Polymer Surfaces and Interfaces : Characterization, Modification and Applications, Stamm, M., ed. (Springer 2008) Chapter 7, 139-160


  115. Schneider, K.; Stamm, M.
    Textile Verbundbauweisen und Fertigungstechnologien für Leichtbaustrukturen des Maschinen- und Fahrzeugbaus
    Harz- und Preformeigenschaften
    mehr
    SDV Die Medien AG (2007) 73-79


  116. Schneider, K.; Stamm, M.
    Textile Verbundbauweisen und Fertigungstechnologien für Leichtbaustrukturen des Maschinen- und Fahrzeugbaus
    Bauteilentwicklung Schüttgutbecher
    mehr
    SDV Die Medien AG (2007) 411-466


  117. Svistkov, A.; Lauke, B.; Heinrich, G.
    Modeling viscoelastic properties and softening of rubber materials mehr
    in: Constitutive models for rubber V, A. Boukamel et al., ed. (CRC Press Inc. 2007) , 113-118


  118. Morozov, I.; Svistkov, A.; Heinrich, G.; Lauke, B.
    Structure of the carbon-black-particles framework in filled elastomer materials mehr
    Vysokomol. Soedinenija, Ser. A 49 (2007) 456-464


  119. Morozov, I.; Svistkov, A.; Heinrich, G.; Lauke, B.
    Structure of the carbon-black-particles framework in filled elastomer materials mehr
    Polymer Science / Series A 49 (2007) 292-299


  120. Stocchi, A.; Lauke, B.; Vázquez, A.; Bernal, C.
    A novel fiber treatment applied to woven jute fabric/vinylester laminates mehr
    Composites / Part A 38 (2007) 1337-1343


  121. Bernal, C.; Lauke, B.
    Fracture and failure behavior of jute-reinforced polymer composites mehr
    in: Engineering Biopolymers: Homopolymers, Blends, and Composites, S. Fakirov, D. Bhattacharyya , ed. (Hanser Verlag 2007) , 311-334


  122. Schneider, K.; Lauke, B.
    Determination of compressive properties of fibre-reinforced polymers in the in-plane direction according to ISO 14126. Part 2: A critical investigation of failure behaviour mehr
    Applied Composite Materials 14 (2007) 177-191


  123. Lauke, B.
    Stress concentration along curved interfaces as basis for adhesion tests mehr
    Composite Interfaces 14 (2007) 307-320


  124. Vogel, R.; Tändler, B.; Voigt, D.; Jehnichen, D.; Häußler, L.; Peitzsch, L.; Brünig, H.
    Melt spinning of bacterial aliphatic polyester using reactive extrusion for improvement of crystallization mehr
    Macromolecular Bioscience 7 (2007) 820-828


  125. Schneider, K.
    Determination of compressive properties of fibre composites in the in-plane direction according to ISO 14126. Part 1: A round robin test round robin test mehr
    Applied Composite Materials 14 (2007) 1-15


  126. Fu, S.-Y.; Lauke, B.; Li, R. K. Y.; Mai, Y.W.
    Effects of PA6,6/PP ratio on the mechanical properties of short glass fiber reinforced and rubber-toughened polyamide 6,6/polypropylene blends mehr
    Composites / Part B 37 (2006) 182-190


  127. Horst, Th.; Lauke, B.; Heinrich, G.
    Application of configurational forces in the context of a kinked crack mehr
    PAMM - Proceedings in Applied Mathematics and Mechanics 6 (2006) 173-174


  128. Morozov, I.; Svistkov, A.; Heinrich, G.; Lauke, B.
    Computer modeling and examination of structural properties of carbon black reinforced rubber mehr
    Kautschuk Gummi Kunststoffe 59 (2006) 642-647


  129. Olsen-Claire, J.; Fu, W.; Chung, W.; Blaker, J.J.; Boccaccini, A.R.; Schmack, G.; Gliesche, K.
    BioglassÒ Coatings on Biodegradable Poly(3-hydroxybutyrate) /P3HB) Meshes for Tissue Engineering Scaffolds mehr
    Materialwissenschaft u. Werkstofftechnik 37 (2006) 577-583


  130. Wollenweber, M.; Domaschke, H.; Hanke, T.; Boxberger, S.; Schmack, G.; Gliesche, K.; Scharnweber, D.; Worch, H.
    Mimicked bioartificial matrix containing chondroitin sulphate on a textile scaffild of poly(3-hydroxybutyrate) alters the differentiation of adult human mesenchymal stem cells mehr
    Tissue Engineering 12 (2006) 345-358


  131. Zhandarov, S.; Mäder, E.
    Increase in the molecular component of the adhesive pressure in polymer composites induced by electric charge mehr
    Composite Interfaces 13 (2006) 865-897


  132. Figiel, L.; Lauke, B.
    Interface fracture of polymer films: blister test experiments and modelling mehr
    International Journal of Fracture 139 (2006) 71-89


  133. Lauke, B.
    Determination of adhesion strength between a coated particle and polymer matrix mehr
    Composites Science and Technology 66 (2006) 3153-3160


  134. Satapathy, B.K.; Lach, R.; Weidisch, R.; Schneider, K.; Janke, A.; Knoll, K.
    Morphology and crack toughness behaviour of nanostructured block copolymer/homopolymer blends mehr
    Engineering Fracture Mechanics 73 (2006) 2399-2412


  135. Zafeiropoulos, N.E.; Davies, R.J.; Schneider, K.; Burghammer, M.; Riekel, Ch.; Stamm, M.
    The Relationship between Craze Structure and Molecular Weight in Polystyrene as Revealed by mSAXS Experiments mehr
    Macromolecular Rapid Communications 27 (2006) 1689-1694


  136. Schüller, T.; Lauke, B.
    Finite-element simulation of interfacial crack propagation: Methods and tools for the complete failure process under large scale yielding mehr
    Engineering Fracture Mechanics 73 (2006) 2252-2263


  137. Kondyurin, A.V.; Lauke, B.; Vogel, R.
    Photopolymerisation of composite material in simulated free space environment at low Earth orbital flight mehr
    European Polymer Journal 42 (2006) 2703-2714


  138. Haasemann, G.; Jacob, K.; Orawattanasrikul, S.; Schneider, K.; Diestel, O.
    Schüttgutbecher aus glasfaserverstärktem Kunststoff mehr
    Schüttgut : die führende Fachzeitschrift für die Schüttgut-Industrie 12 (2006)


  139. Zhandarov, S.; Gorbatkina, Yu.A.; Mäder, E.
    Adhesional pressure as a criterion for interfacial failure in fibrous microcomposites and its determination using a microbond test. mehr
    Composite Science and Technology 66 (2006) 2610-2628


  140. Fahmi, A.; Gutmann, J.S.; Vogel, R.; Gindy, N.; Stamm, M.
    Rheology Pathway to Macroscale Ordered Nanostructures of Polymeric Nanotemplates: Nanopores, Nanosheets and Nanofibers mehr
    Macromolecular Materials and Engineering 291 (2006) 1061-1073


  141. Vogel, R.; Tändler, B.; Häußler, L.; Jehnichen, D.; Brünig, H.
    Melt Spinning of Poly(3-hydroxybutyrate) Fibers for Tissue Engineering using a-Cyclodextrin/Polymer Inclusion Complexes as Nucleation Agent mehr
    Macromolecular Bioscience 6 (2006) 730-736


  142. Feldman, A. Y.; Wachtel, E.; Zafeiropoulos, N.E.; Schneider, K.; Stamm, M.; Davies, R.J.; Weinberg, A.; Marom, G.
    In situ synchrotron microbeam analysis of the stiffness of transcrystallinity in aramid fiber reinforced nylon 66 composites mehr
    Composite Science and Technology 66 (2006) 2009-2015


  143. Devendra, R.; Hatzikiriakos, S.G.; Vogel, R.
    Rheology of metallocene polyethylene based nanocomposites: Influence of graft modification mehr
    Journal of Rheology 50 (2006) 415-434


  144. Vogel, R.; Brünig, H.; Häußler, L.; Hatzikiriakos, S.G.
    Influence of Processing Aids on the Uniaxial Extensinal Behavior of Metallocene Polyethylenes mehr
    Polymer Engineering and Science 46 (2006) 735-742


  145. Schneider, K.; Trabelsi, S.; Zafeiropoulos, N.E.; Davies, R.J.; Riekel, Ch.; Stamm, M.
    The Study of Cavitation in HDPE Using Time Resolved Synchrotron X-ray Scattering During Tensile Deformation mehr
    Macromolecular Symposia 236 (2006) 241-248


  146. Kondyurina, I.; Kondyurin, A.V.; Lauke, B.; Figiel, L.; Vogel, R.; Reuter, U.
    Polymerisation of composite materials in space environment for development of a moon base mehr
    Advances in Space Research 37 (2006) 109-115


  147. Schüller, T.; Lauke, B.
    Finite-Element-Simulation of Interfacial Crack Propagation: Cross-check of Simulation Results with the Essential Work of Interfacial Fracture Method mehr
    Key Engineering Materials 312 (2006) 9-14


  148. Huang, Chin-Feng; Fu, S.-Y.; Lauke, B.; Li, L.F.; Ye, L.
    Cryogenic properties of SiO2/epoxy nanocomposites mehr
    Cryogenics 45 (2006) 450-454


  149. Zhandarov, S.; Pisanova, E.; Mäder, E.
    Is there any contradiction between the stress and energy failure criteria in micromechanical tests? Pt. III. Experimental observation of crack propagation in the microbond test mehr
    Journal of Adhesion Science and Technology 19 (2005) 679-704


  150. Zhandarov, S.; Mäder, E.
    Peak force as function of the embredded length in pull-out and microbond tests: effect of specimen geometry mehr
    Journal of Adhesion Science and Technology 19 (2005) 817-856


  151. Fu, S.-Y.; Lauke, B.; Zhang, Y. H.; Mai, Y.W.
    On the post-mortem fracture surface morphology of short fiber reinforced thermoplastics mehr
    Composites / Part A 36 (2005) 987-994


  152. Schmack, G.; Aquino, E.; Vogel, R.; Tändler, B.; Häußler, L.; Voigt, D.
    Investigation of the recycling capability of poly(lactide) mehr
    Chemical Fibers International 55 (2005) 292-297


  153. Gliesche, K.; Breier, A.; Schmack, G.
    Herstellung textiler Scaffolds mittels Sticktechnik mehr
    Biomaterialien 6 (2005) 155-159


  154. Zafeiropoulos, N.E.; Davies, R.J.; Roth, S.V.; Burghammer, M.; Schneider, K.; Riekel, C.; Stamm, M.
    Microfocus X-Ray Scattering Scanning Microscopy for Polymer Applications mehr
    Macromolecular Rapid Communications 26 (2005) 1547-1551


  155. Lauke, B.; Schneider, K.; Schüller, T.
    Determination of interface strength of polymer-polymer joints by a curved interface tensile test mehr
    in: Polymer-Composites : From Nano- to Macro-Scale, Friedrich, K.; Fakirov, S.; Zhong Zhang, ed. (Springer 2005) , 133-146


  156. Heinrich, G.; Costa, F. R.; Abdel-Goad, M.; Wagenknecht, U.; Lauke, B.; Härtel, V.; Tschimmel, J.; Klüppel, M.; Sviskov, A.L.
    Structural Kinetics in Filled Elastomers and PE/LDH Composites mehr
    Kautschuk Gummi Kunststoffe 58 (2005) 163-167


  157. Pospiech, D.; Komber, H.; Jehnichen, D.; Häußler, L.; Eckstein, K.; Scheibner, H.; Janke, A.; Kricheldorf, H.R.; Petermann, O.
    Multiblock Copolymers of L-Lactide and Trimethylene Carbonate mehr
    Biomacromolecules 6 (2005) 439-446


  158. Lach, R.; Schneider, K.; Weidisch, R.; Janke, A.; Knoll, K.
    Application of the essential work of fracture concept to nanostructured polymer materials mehr
    European Polymer Journal 41 (2005) 383-392


  159. Figiel, L.; Zafeiropoulos, N.E.; Lauke, B.
    Numerical analysis of the elastic constants´ effect on the delamination propagation in a curved layered composite beam under cyclic shear loading mehr
    Composites / Part A 36 (2005) 153-162


  160. Zhandarov, S.; Mäder, E.
    Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters mehr
    Composite Science and Technology 65 (2005) 149-160


  161. Golzar, M.; Beyreuther, R.; Brünig, H.; Tändler, B.; Vogel, R.
    Online Temperature Measurement and Simultaneous Diameter Estimation of Fibres by Thermography of the Spinnline in the Melt Spinning Process mehr
    Advances in Polymer Technology 23 (2004) 176-185


  162. Wollenweber, M.; Hofmann, A.; Boxberger, S.; Schmack, G.; Gliesche, K.; Hanke, T.; Scharnweber, D.; Worch, H.
    Textile Strukturen aus Poly(3-hydroxybutyrat) für das Tissue Engineering großer Defekte in langen Röhrenknochen mehr
    Biomaterialien 5 (2004)


  163. Kondyurin, A.V.; Lauke, B.; Kondyurina, I.; Orba, E.
    Creation of biological module for self-regulating ecological system by the way of polymerization of composite materials in free space mehr
    Advances in Space Research 34 (2004) 1585-1591


  164. Zhandarov, S.; Mäder, E.
    Determination of interfacial parameters in fiber-polymer systems from a pull-out test data using a bilinear bond law mehr
    Composite Interfaces 11 (2004) 361-391


  165. Vogel, R.; Hatzikiriakos, S.G.
    Rheological Evaluation of Metallocene Polyethylenes with processing aids by Multi - Wave Oscillations mehr
    Polymer Engineering and Science 44 (2004) 2047-2051


  166. Brantseva, T.V.; Gorbatkina, Yu.A.; Dutschk, V.; Schneider, K.; Häßler, R.; Kerber, M.L.
    Modification of epoxy resin by polysulfone to improve the interfacial and mechanical properties in glass fibre composites. III Properties of the blends and their structure at the polymer/fiber interphase mehr
    Journal of Adhesion Science and Technology 18 (2004) 1309-1323


  167. Kondyurin, A.V.; Lauke, B.
    Curing of liquid epoxy resin in plasma discharge mehr
    European Polymer Journal 40 (2004) 1915-1923


  168. Lauke, B.; Schüller, T.; Beckert, W.
    The Application of Fracture Mechanics to Polymers, Adhesives and Composites
    Determination of interface adhesion in single-fibre pull-out and microbond experiments
    mehr
    Elsevier (2004) 227-232


  169. Kondyurin, A.V.; Lauke, B.; Richter, E.
    Polymerization Processes of Epoxy Matrix Composites under Simulated Free Space Conditions mehr
    High Performance Polymers 16 (2004) 163-175


  170. Plonka, R.; Mäder, E.; Gao, S.-L.; Bellmann, C.; Dutschk, V.; Zhandarov, S.
    Adhesion in epoxy/glass fibre composites influenced by aging effects on sizings mehr
    Composites / Part A 35 (2004) 1207-1216


  171. Davies, R.J.; Zafeiropoulos, N.E.; Schneider, K.; Roth, S.V.; Burghammer, M.; Riekel, C.; Kotek, J.; Stamm, M.
    The use of synchrotron x-ray scattering coupled with in situ mechanical testing for studying deformation and structural change in isotactic polypropylene mehr
    Colloid and Polymer Science 282 (2004) 854-866


  172. Schmack, G.; Kramer, S.; Dorschner, H.; Gliesche, K.
    Effect of electron irradiation on the properties of poly(3-hydroxybutyric acid) fibers and their in vitro degradation mehr
    Polymer Degradation and Stability 83 (2004) 467-472


  173. Gao, S.-L.; Mäder, E.; Zhandarov, S.
    Carbon fibres and composites with epoxy resins: Topography, fractography and interphases mehr
    Carbon 42 (2004) 515-529


  174. Figiel, L.; Kaminski, M.; Lauke, B.
    Analysis of a compression shear fracture test for curved interfaces in layered composites mehr
    Engineering Fracture Mechanics 71 (2004) 967-980


  175. Schneider, K.; Zafeiropoulos, N.E.; Häußler, L.; Stamm, M.
    High-throughput screening of the influence of thermal treatments on the mechanical properties of semicrystalline polymers: A case Study iPP mehr
    Macromolecular Rapid Communications 25 (2004) 355-359


  176. Schmack, G.; Tändler, B.; Opitz, G.; Komber, H.; Häußler, L.; Voigt, D.; Weinmann, S.; Heinemann, M.; Fritz, H.-G.
    High-Speed Melt Spinning of Various Grades of Polylactides mehr
    Journal of Applied Polymer Science 91 (2004) 800-806


  177. Schneider, K.; Lauke, B.; Schüller, T.
    Determination of the interface strength between two polymer materials by a new curved interface tensile test: Preliminary experimental results mehr
    Composite Interfaces 10 (2003) 581-591


  178. Brantseva, T.V.; Gorbatkina, Yu.A.; Dutschk, V.; Vogel, R.; Grundke, K.; Kerber, M.L.
    Modification of epoxy resin by polysulfone to improve the interfacial and mechanical properties in glass fibre composites. I. Study of processes during matrix/glass fibre interface formation mehr
    Journal of Adhesion Science and Technology 17 (2003) 2047-2063


  179. Beyreuther, R.; Tändler, B.; Vogel, R.; Hoffmann, M.
    Melt spinning of reactive extruded and/or blended polymer fibers by means of an online coupled twin screw extruder mehr
    International Polymer Processing 18 (2003) 74-79


  180. Hoffmann, M.; Beyreuther, R.; Vogel, R.; Tändler, B.
    Melt spinning of crosslinkable thermoplastic elastomers by means of twin screw extrusion mehr
    Chemical Fibers International 53 (2003)


  181. Zafeiropoulos, N.E.; Pohlers, A.; Jehnichen, D.; Kummer, S.; Roth, S.; Burghammer, M.; Schneider, K.; Weidisch, R.; Stamm, M.
    A study of the deformation process of triblock poly(styrene-b-butadiene) copolymers with the use of micro focus beam synchrotron radiation in situ with tensile testing mehr
    The Europan Synchrotron Radiation Facility (2003)


  182. Schmack, G.; Tändler, B.; Vogel, R.; Häußler, L.; Blechschmidt, D.; Lindner, R.
    Melt Processing of a New Biodegradable Synthetic Copolyester in High-Speed Spinning and Spunbonding Nonwoven Process mehr
    Chemical Fibers International 53 (2003)


  183. Haselbach, W.; Lauke, B.
    Acoustic emission of debonding between fibre and matrix to evaluate local adhesion mehr
    Composite Science and Technology 63 (2003) 2155-2162


  184. Botelho, E.C.; Figiel, L.; Rezende, M.C.; Lauke, B.
    Mechanical behavior of carbon fiber reinforced polyamide composites mehr
    Composites Science and Technology 63 (2003) 1843-1855


  185. Zhandarov, S.; Mäder, E.
    Indirect estimation of fiber/polymer bond strength and interfacial friction from maximum load values recorded in the microbond and pull-out tests. Part II: Critical energy release rate mehr
    Journal of Adhesion Science and Technology 17 (2003) 967-980


  186. Vogel, R.; Hatzikiriakos, S.G.; Brünig, H.; Tändler, B.; Golzar, M.
    Improved Spinnability of Metallocene Polyethylenes by Using Processing Aids mehr
    International Polymer Processing 18 (2003) 67-73


  187. Rauwolf, C.; Schneider, K.; Werner, C.
    Molecular Modeling der Grenzfläche amorphes TiO2-Kollagen mehr
    Biomaterialien 4 (2003) 178-183


  188. Lauke, B.; Schüller, T.; Schneider, K.
    Determination of interface strength between two polymer materials by a new curved interface tensile test mehr
    Composite Interfaces 10 (2003) 1-15


  189. Brünig, H.; Beyreuther, R.; Vogel, R.; Tändler, B.
    Melt spinning of fine and ultra-fine PEEK-filaments mehr
    Journal of Materials Science 38 (2003) 2149-2153


  190. Zhandarov, S.; Mäder, E.
    Some reflections on 'self-consistent' approach to the calculation of acid-base parameters of solids and liquids from wetting data mehr
    Composite Interfaces 10 (2003) 41-59


  191. Fu, S.-Y.; Mai, Y.W.; Lauke, B.; Xu, G.; Yue, C. Y.
    Combined effect of fiber content and microstructure on the fracture toughness of SGF and SCF reinforced polypropylene composites mehr
    Journal of Materials Science 37 (2002) 3067-2074


  192. Jehnichen, D.; Pohlers, A.; Zafeiropoulos, N.E.; Kummer, S.; Schneider, K.; Lehmann, D.; Stamm, M.; Roth, S.; Burghammer, M.; Riekel, C.
    Scanning X-ray microscopy for polymer applications mehr
    The Europan Synchrotron Radiation Facility (2002)


  193. Lauke, B.; Schüller, T.
    Calculation of stress concentration caused by a coated particle in polymer matrix to determine adhesion strength at the interface mehr
    Composite Science and Technology 62 (2002) 1965-1978


  194. Xiaoyu, J.; Lauke, B.; Schüller, T.
    Frictional contact analysis of scratch test for elastic and elastic-plastic thin-coating/substrate materials mehr
    Thin Solid Films 414 (2002) 63-71


  195. Tändler, B.; Schmack, G.; Vogel, R.; Blechschmidt, D.; Lindner, R.
    Melt Processing of a New Biodegradable Synthetic Polymer in High-Speed Spinning and Underpressure Spunbonding Process mehr
    Journal of Polymers and the Environment 9 (2002) 149-156


  196. Mäder, E.; Zhou, X.-F.; Zhandarov, S.; Nutt, S.R.; Gao, S.-L.
    Bond Strength Measurement between Glass Fibres and Epoxy Resin at Elevated Temperatures Using the Pull-Out and Push-Out Techniques mehr
    Journal of Adhesion 78 (2002) 547-570


  197. Zhandarov, S.; Mäder, E.; Yurkevich, O.R.
    Indirect estimation of polymer/fiber bond strength and interfacial friction from maximum load values recorded in the microbond and pull-out tests. Part I: Local bond strength mehr
    Journal of Adhesion Science and Technology 16 (2002) 1171-1200


  198. Beyreuther, R.; Brünig, H.; Vogel, R.
    Preferable Filament Diameter Ratios of Hybrid Yarn Components for Optimized Longfiber Reinforced Thermoplastics mehr
    International Polymer Processing 17 (2002) 153-157


  199. Schüller, T.; Lauke, B.
    Measuring the interfacial transverse strength: a novel test for evaluating polymer joints mehr
    International Journal of Adhesion and Adhesives 22 (2002) 169-174


  200. Schmack, G.; Gliesche, K.; Nitschke, M.; Werner, C.
    Implantate aus Basis von Poly(3-hydroxybuttersäure) mehr
    Biomaterialien 3 (2002) 21-25


  201. Fu, S.-Y.; Mai, Y.W.; Lauke, B.; Yue, C. Y.
    Synergistic effect on the fracture toughness of hybrid short glass fiber and short carbon fiber reinforced polypropylene composites mehr
    Materials Science and Engineering / A 323 (2002) 326-335


  202. Fu, S.-Y.; Mai, Y.W.; Lauke, B.; Xu, G.; Yue, C. Y.
    Fracture behavior of short glass fiber and short carbon fiber reinforced polypropylene composites mehr
    International Journal of Materials & Product Technology 17 (2002) 108-120


  203. Dollhofer, J.; Beckert, W.; Lauke, B.
    Plasticity aspects of interfacial fracture for polymer/glass specimes mehr
    Theoretical and Applied Fracture Mechanics 36 (2001) 1-15


  204. Dollhofer, J.; Beckert, W.; Lauke, B.; Schneider, K.
    Fracture mechanics characterization of mixed-mode toughness of thermoplast/glass interfaces (brittle/ductile interfacial mixed-mode fracture) mehr
    Journal of Adhesion Science and Technology 15 (2001) 1559-1587


  205. Schmack, G.
    Biodegradable Polymers: Properties, Possibilities and Limits Considering the Synthesis, Processing and Application of Poly(2-hydroxypropionic acid) and Poly(3-hydroxybutyric acid) mehr
    in: The Handbook of Environmental Chemistry (Springer 2001) 12, 193-214


  206. Pisanova, E.; Zhandarov, S.
    Fiber-Reinforced Heterogeneous (HCs) Composites: Bond Strength mehr
    Hanser Verlag (2001) 461-484


  207. Fu, S.-Y.; Lauke, B.; Mäder, E.; Yue, C. Y.; Hu, X.; Mai, Y.W.
    Hybrid effects on tensile properties of hybrid short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites mehr
    Journal of Materials Science 36 (2001) 1243-1251


  208. Pisanova, E.; Zhandarov, S.
    Reversible and irreversible adhesion of polymers: Possibilities for measurement and calculation mehr
    Journal of Adhesion 75 (2001) 89-127


  209. Pisanova, E.; Zhandarov, S.; Mäder, E.; Young, R. J.; Ahmad, I.
    Three techniques of interfacial bond strength estimation from direct observation of crack initiation and propagation in polymer-fibre systems mehr
    Composites / Part A 32 (2001) 435-443


  210. Pisanova, E.; Zhandarov, S.; Mäder, E.
    How can adhesion be determined from micromechanical tests? mehr
    Composites / Part A 32 (2001) 425-434


  211. Schneider, K.; Herrmann, V.
    Semi-quantitative mechanical characterization of fibre composites in the sub-micron-range by SFM mehr
    Composites / Part A 32 (2001) 1679-1687


  212. Beyreuther, R.; Tändler, B.; Hoffmann, M.; Vogel, R.
    Reactive extrusion and melt spinning - A new technological route to special fibres mehr
    Journal of Materials Science 36 (2001) 3103-3111


  213. Jiang, J.; Lauke, B.; Beckert, W.; Schüller, T.
    Numerical simulation of micro-scratch tests for coating/substrate composites mehr
    Composite Interfaces 8 (2001) 19-40


  214. Schmack, G.; Jehnichen, D.; Vogel, R.; Tändler, B.; Beyreuther, R.; Jacobsen, S.; Fritz, H.-G.
    Biodegradable fibres spun from poly(lactide) generated by reactive extrusion mehr
    Journal of Biotechnology 86 (2001) 151-160


  215. Gorenflo, V.; Schmack, G.; Vogel, R.; Steinbüchel, A.
    Development of a Process for the Biotechnological Large-Scale Production of 4-Hydroxyvalerate-Containing Polyesters and Characterization of Their Physical and Mechanical Properties mehr
    Biomacromolecules 2 (2001) 45-57


  216. Zhandarov, S.; Pisanova, E.; Mäder, E.; Nairn, J.A.
    Investigation of load transfer between the fiber and the matrix in pull-out tests with fibers having different diameters mehr
    Journal of Adhesion Science and Technology 15 (2001) 205-222


  217. Schneider, K.; Lauke, B.; Beckert, W.
    Compression Shear Test (CST) - A Convenient Apparatus for the Estimation of Apparent Shear Strength of Composite Materials mehr
    Applied Composite Materials 8 (2001) 43-62


  218. Lauke, B.; Schüller, T.
    Essential work of interfacial fracture: a method to characterise adhesion at polymer-polymer interfaces mehr
    International Journal of Adhesion and Adhesives 21 (2001) 55-58


  219. Vogel, R.; Jenschke, W.; Beyreuther, R.
    Generation of an antistatic polyolefin fiber by adding a carbon black filled component mehr
    Chemical Fibers International 50 (2000)


  220. Pisanova, E.; Dutschk, V.; Zhandarov, S.; Mäder, E.
    "Fundamental" and "practical" adhesion in polymer-fiber systems mehr
    in: Polymer Surface Modification: Relevance to Adhesion, Volume 2, K.L. Mittal, ed. (VSP 2000) 2, 479-503


  221. Schneider, K.; Scheibner, H.; Bellman, C.
    Estimation of tensile properties of bare elastane yarns mehr
    Chemical Fibers International 50 (2000)


  222. Hoffmann, M.; Tändler, B.; Beyreuther, R.; Vogel, R.
    Schmelzspinnen mit Doppelschneckenextruder. Teil II: Polyolefin-Elastomerfasern mittels reaktiver Extrusion mehr
    Kautschuk Gummi Kunststoffe 53 (2000) 632-637


  223. Kravtsov, A.; Brünig, H.; Zhandarov, S.; Beyreuther, R.
    The Electret Effect in Polypropylene Fibers Treated in a Corona Discharge mehr
    Advances in Polymer Technology 19 (2000) 312-316


  224. Zhandarov, S.; Pisanova, E.; Mäder, E.
    Is there any contradiction between the stress and energy failure criteria in micromechanical tests? Pt. II. Crack propagation: Effect of friction on force-displacement curves mehr
    Composite Interfaces 7 (2000) 149-175


  225. Schüller, T.; Beckert, W.; Lauke, B.; Ageorges, C.; Friedrich, K.
    Single fibre transverse debonding: stress analysis of the Broutman test mehr
    Composites / Part A 31 (2000) 661-670


  226. Schmack, G.; Jehnichen, D.; Vogel, R.; Tändler, B.
    Biodegradable Fibers of Poly(3-hydroxybutyrate) Produced by High-Speed Melt Spinning and Spin Drawing mehr
    Journal of Polymer Science: Part B: Polymer Physics 38 (2000) 2841-2850


  227. Schmack, G.; Dutschk, V.; Pisanova, E.
    Modification of Polyamide Fibres to Improve Their Biocompatibility mehr
    Fibre Chemistry 32 (2000) 48-55


  228. Beyreuther, R.; Vogel, R.; Tändler, B.; Hoffmann, M.
    Schmelzspinnen mit Doppelschneckenextruder. Teil I: Technologische Voraussetzungen und Ziele mehr
    Kautschuk Gummi Kunststoffe 53 (2000) 601-606


  229. Schüller, T.; Beckert, W.; Lauke, B.; Schüller, T.
    Single-fibre transverse debonding: tensile test of a necked specimen mehr
    Composites Science and Technology 60 (2000) 2077-2082


  230. Lauke, B.; Schüller, T.; Beckert, W.
    Calculation of adhesion strength at the interface of a coated particle embedded within matrix under multiaxial load mehr
    Computational Material Science 18 (2000) 362-380


  231. Fu, S.-Y.; Lauke, B.; Mäder, E.; Yue, C. Y.; Fu, S.-Y.
    Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites mehr
    Composites: Part A 31 (2000) 1117-1125


  232. Lauke, B.; Schüller, T.; Dollhofer, J.
    Polymerwerkstoffe 2000: Halle/Saale, 25. - 27. September 2000
    Interface adhesion of polymer composites: mixed mode energy release rate and essential work of interfacial fracture
    mehr
    Martin-Luther-Universität Halle-Wittenberg (2000) 194-197


  233. Mäder, E.; Zhou, X.-F.; Pisanova, E.; Zhandarov, S.; Nutt, S.R.
    Characterization of the interfacial bond strength between glass fibre and epoxy resin using the pull-out and push-out techniques mehr
    Advanced Composites Letters 9 (2000) 2203-2209


  234. Schmack, G.; Dutschk, V.; Pisanova, E.
    Modifizierung von Polyamidfasern zur Verbesserung ihrer Biokompatibilität (russ.) mehr
    Chimiceskie volokna (2000)


  235. Fu, S.-Y.; Lauke, B.
    Comparison of the stress transfer in single- and multi-fiber composite pull-out tests mehr
    Journal of Adhesion Science and Technology 14 (2000) 437-452


  236. Zhandarov, S.; Pisanova, E.; Schneider, K.
    Fiber-stretching test: a new technique for characterizing the fiber-matrix interface using direct observation of crack initiation and propagation mehr
    Journal of Adhesion Science and Technology 14 (2000) 381-398


  237. Fu, S.-Y.; Lauke, B.
    The elastic modulus of misaligned short-fiber-reinforced polymers mehr
    Composites Science and Technology 58 (1998) 389-400


 
Publications
Publikationen

Abteilungen und Gruppen

Mechanik und Struktur

News