Netzker, C.; Horst, Th.; Reincke, K.; Behnke, R.; Kaliske, M.; Heinrich, G.; Grellmann, W. Analysis of stable crack propagation in filled rubber based on a global energy balancemore International Journal of Fracture 181 (2013) 13-23
Gazuz, I.; Fuchs, M. Nonlinear microrheology of dense colloidal suspensions: a mode-coupling theorymore Physical Review / E 87 (2013) 032304
Rentsch, C.; Schneiders, W.; Hess, R.; Rentsch, B.; Bernhardt, R.; Spekl, K.; Schneider, K.; Scharnweber, D.; Biewener, A.; Rammelt, S. Healing properties of surface-coated polycaprolactone-co-lactide scaffolds - a pilot study in sheepmore Journal of Biomaterials Applications 27 (2013) Published online
Stocchi, A.; Lauke, B.; Giannotti, M. I.; Vázquez, A.; Bernal, C. Tensile response and fracture and failure behavior of jute fabrics-flyash-vinylester hybrid compositesmore Fibers and Polymers 14 (2013) 285-291
Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L. Precipitated calcium carbonate as carrier particles of "dry liquids" for post-processing crosslinking reactionsmore Rubber Fibres Plastics International : RFP 8 (2013) 36-39
Chervanyov, A.; Heinrich, G. Rates of the colloid coagulation in the presence of irreversibly adsorbing and non-adsorbing polymersmore Polymer Composites 34 (2013) 187-103
Schneider, K.; Häußler, L.; Roth, S.V. Tailoring of morphology and mechanical properties of isotactic polypropylene by processingmore in: Polypropylene, Dogan, F., ed. (InTech 2013) , Chapter 24, 459-482
Lauke, B.; Fu, S.-Y. Aspects of fracture toughness modelling of particle filled polymer compositesmore Composites: Part B 45 (2013) 1569-1574
Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L. Gefälltes Calciumcarbonat als Trägerpartikel von Reagenzien für Vernetzungsreaktionenmore GAK : Gummi Fasern Kunststoffe 65 (2012) 754-757
Botelho, E.C.; Costa, M. L.; Edwards, E. R.; Burkhart, T.; Lauke, B. Effects of carbon nanotube fillers dispersion on mechanical behavior of phenolic/carbon nanotube nanocompositemore Journal of Materials Research 27 (2012) 2342-2351
Toshchevikov, V.; Grenzer, M.; Heinrich, G. Effects of the liquid-crystallineorder on the light-induced deformation of azobenzene elastomersmore Proceedings of the SPIE 8545 (2012) 854507/1-10
Toshchevikov, V.; Grenzer, M.; Heinrich, G. Theory of light-induced deformation of azobenzene elastomersmore Macromolecular Symposia 316 (2012) 10-16
Toshchevikov, V.; Smirnova, V.; Yudin, V.; Svetlichny, V. Dynamic mechanical analysis and molecular mobility of the R-BAPB type polyimidemore Macromolecular Symposia 316 (2012) 83-89
Dutschk, V.; Chen, J.; Petzold, G.; Vogel, R.; Clausse, D.; Ravera, F.; Liggieri, L. The role of emulsifier in stabilization of emulsions containing colloidal alumina particlesmore Colloids and Surfaces A: Physicochemical and Engineering Aspects 413 (2012) 239-247
Ilnytskyi, J.; Grenzer, M.; Neher, D.; Allen, M. P. Modelling elasticity and memaory effects in liquid crystalline elastomers by molecular dynamics simulationsmore Soft Matter 8 (2012) 11123-11134
Ivaneiko, D.; Toshchevikov, V.; Grenzer, M.; Heinrich, G. Effects of particle distribution on mechanical properties of magneto-sensitive elastomers in a homogeneous magnetic fieldmore Condensed Matter Physics 15 (2012) 33601: 1-12
Morozov, I.; Lauke, B.; Heinrich, G. Microstructural analysis of carbon black filled rubbers by atomic force microcopy and computer simulation techniquesmore Plastics, Rubber and Composites : Processing and Applications 41 (2012) 285-289
Brüning, K.; Schneider, K.; Roth, S.V.; Heinrich, G. Kinetics of strain-induced crystallization in natural rubber studied by WAXD: Dynamic and impact tensile experimentsmore Macromolecules 45 (2012) 7914-7919
Fleischhauer, R.; Dal, H.; Kaliske, M.; Schneider, K. A constitutive model for finite deformation of amorphous polymersmore International Journal of Mechanical Science 65 (2012) 48-63
Brüning, K.; Schneider, K.; Heinrich, G. Deformation and orientation in filled rubbers on the nano- and microscale studied by x-ray scatteringmore Journal of Polymer Science: Part B: Polymer Physics 50 (2012) 1728-1732
Chervanyov, A.; Heinrich, G. Immersion free energy and polymer-mediated depletion interactions between nanocolloids as studied by analytic self-consistent field theorymore Physical Review / E 86 (2012) 021801 [12 pages]
Chervanyov, A.; Heinrich, G. Analytic theory of the interactions between nanocolloids mediated by reversibly adsorbed polymersmore Physical Review / E 86 (2012) 031801 [5 pages]
Chervanyov, A.; Heinrich, G. Relaxarion times of nano-colloid flocculation induced by adsorbing and non-adsorbing polymersmore AIP Conference Proceedings 1459 (2012) 14-16
Li, X.; Kretzschmar, B.; Janke, A.; Häußler, L.; Schneider, K.; Stamm, M. Investigation of structure and mechanical behavior pf polyamide 6/ZnO and polyamide 6/Al2O3 nanocompositesmore Advanced Materials Research 557-559 (2012) 272-276
Toshchevikov, V.; Grenzer, M.; Heinrich, G. Theory of light-induced deformation of azobenzene elastomers : Influence of network structuremore Journal of Chemical Physics 137 (2012) 024903 1
Morozov, I.; Lauke, B.; Heinrich, G. Quantitative microstructural investigation of carbon-black-filled rubbers by AFMmore Rubber Chemistry and Technology 85 (2012) 244-263
Ganß, M.; Staudinger, U.; Thunga, M.; Knoll, K.; Schneider, K.; Stamm, M.; Weidisch, R. Influence of S/B middle block composition on the morphology and the mechanical response of polystyrene-poly(styrene-co-butadiene)-polystyrene triblock copolymersmore Polymer 53 (2012) 2085-2098
Heinrich, G.; Klüppel, M.; Vilgis, T. A.; Horst, Th. Wenn Gummi zu Bruch gehtmore Physik Journal 11 (2012) 39-44
Freudenberg, U.; Sommer, J.-U.; Levental, K.; Welzel, P; Zieris, A.; Chwalek, K.; Schneider, K.; Prokoph, S.; Prewitz, M.; Dockhorn, R.; Werner, C. Using Mean Field Theory to Guide Biofunctional Materials Designmore Advanced Functional Materials 22 (2012) 1391-1398
Grenzer, M.; Skipa, T.; Lellinger, D.; Alig, I.; Heinrich, G. Superposition approach for description of electrical conductivity in sheared MWNT/polycarbonate meltsmore eXPRESS Polymer Letters 6 (2012) 438-453
Morozov, I.; Lauke, B.; Heinrich, G. Microstructural analysis of carbon black filled rubbers by atomic force microcopy and computer simulation techniquesmore in: Constitutive Models for Rubber VII, Jerrams & Murphy, ed. (Taylor & Francis Group 2012) , 173-175
Kaminski, M.; Lauke, B. Probabilistic and stochastic analysis of the effective properties for the particle reinforced elastomersmore Computational Materials Science 56 (2012) 147-160
Toshchevikov, V.; Grenzer, M.; Heinrich, G. Light-induced deformation of azobenzene elastomers: a regular cubic network modelmore Journal of Physical Chemistry / B 116 (2012) 913-924
Vogel, R.; Vucak, M.; Nover, C.; Peitzsch, L. Precipitated calcium carbonate as carrier particles of 'dry liquids' for post-processing crosslinking reactionsmore e-Polymers no. 023 (2012) 9 Seiten, http://www.e-polymers.org
Gube, A.; Jakisch, L.; Häußler, L.; Schneider, K.; Voit, B.; Böhme, F. Alternating block copolymers based on polyamide-12 and polycaprolactonemore Polymer International 61 (2012) 157-162
Domurath, J.; Grenzer, M.; Ausias, G.; Heinrich, G. Modelling of stress and strain amplification effects in filled polymer meltsmore Journal of Non-Newtonian Fluid Mechanics 171-172 (2012) 8-16
Zhang, X.; Schneider, K.; Liu, G.; Chen, J.; Brüning, K.; Wang, D.; Stamm, M. Deformation-mediated superstructures and cavitation of poly(L-lactide): In-situ small-angle X-ray scattering studymore Polymer 53 (2012) 648-656
Lauke, B.; Barroso, A. Notched-butt test for the determination of adhesion strength at bimaterial interfacesmore Composite Interfaces 18 (2011) 661-669
Schlegel, R.; Duan, Y.; Weidisch, R.; Hölzer, S.; Schneider, K.; Stamm, M.; Uhrig, D.; Mays, J.W.; Heinrich, G.; Hadjichristidis, N. High-strain-induced deformation mechanisms in block - graft and multigraft copolymersmore Macromolecules 44 (2011) 9374-9383
Grenzer, M.; Toshchevikov, V.; Ilnytskyi, J.; Heinrich, G. Photo-induced deformation of azobenzene polymers: theory and simulationsmore Proceedings of SPIE 8189 (2011) 818910 (15 pages)
Richter, S.; Kreyenschulte, H.; Grenzer, M.; Götze, T.; Heinrich, G. Studies of the so-called jamming phenomenon in filled rubbers using dynamical-mechanical experimentsmore Macromolecular Symposia 306-307 (2011) 141-149
Lellinger, D.; Skipa, T.; Grenzer, M.; Conzen, C.; Meyer, H.; Alig, I. Eigenschaftesvorhersage von Carbon Nanotube-Polymercompsites in der Schmelzeverarbeitungmore GAK : Gummi Fasern Kunststoffe 64 (2011) 550-553
Zhang, X.; Schneider, K.; Liu, G.; Chen, J.; Brüning, K.; Wang, D.; Stamm, M. Structure variation of tensile-deformed amorphous poly(L-lactic acid): Effects of deformation rate and strainmore Polymer 52 (2011) 4141-4149
Chervanyov, A. Depletion forces acting on nanoparticles in confined polymer systems: Potential theorymore Physical Review / E 83 (2011) 061801 [13 pages]
Ilnytskyi, J.; Neher, D.; Grenzer, M. Opposite photo-induced deformations in azobenzene-containing polymers with different architecture: Molecular dynamics studymore Journal of Chemical Physics 135 (2011) 044901 (12 pages)
Gnann, M. V.; Gazuz, I.; Puertas, A. M.; Fuchs, M.; Voigtmann, Th. Schematic models for active nonlinear microrheologymore Soft Matter 7 (2011) 1390-1396
Ivaneiko, D.; Toshchevikov, V.; Grenzer, M.; Heinrich, G. Magneto-sensitive elastomers in a homogeneous magnetic field: a regular rectangular lattice modelmore Macromolecular Theory and Simulations 20 (2011) 411-424
Chen, J.; Vogel, R.; Werner, S.; Heinrich, G.; Clausse, D.; Dutschk, V. Influence of the particle type on the rheological behavior of pickering emulsionsmore Colloids and Surfaces A: Physicochemical and Engineering Aspects 382 (2011)
Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Heinrich, G.; Werner, C. Hollow fibers made from a poly(3-hydroxybutyrate)/poly-e-caprolactone blendmore eXPRESS Polymer Letters 5 (2011) 643-652
Lauke, B. Doubly-curved interfaces for adhesion strength testingmore Composite Interfaces 18 (2011) 121-133
Morozov, I.; Lauke, B.; Heinrich, G. A novel method of quantitative characterization of filled rubber structures by AFMmore Kautschuk Gummi Kunststoffe 64 (2011) 24-27
Ghosh, A.; Banerjee, S.; Komber, H.; Häußler, L.; Schneider, K.; Voit, B. New semifluorinated siloxane-grafted copolyimides: Synthesis and comparison with their linear analogsmore Macromolecular Materials and Engineering 296 (2011) 391-400
Horecha, M.; Senkovsky, V.; Schneider, K.; Kiriy, A.; Stamm, M. Swelling behaviour of PNIPAM-polyisoprene core-shell microgels at surfacemore Colloid and Polymer Science 289 (2011) 603-612
Komar, L. A.; Lauke, B.; Heinrich, G. Modelling of formation of interphase layers in the filled elastomeric materials. - In kyrill.Schr.more Mekhanika kompozitsionnykh materialov i konstruktsii = Composite mechanics and design 16 (2010) 73-83
Komar, L. A.; Lauke, B.; Heinrich, G. Modelling of the formation of interface layers in nanofilled elastomersmore Nanomechanics Science and Technology 1 (2010) 211-222
Pelevin, A.; Svistkov, A.; Adamov, A. A.; Lauke, B.; Heinrich, G. The algorithm of searching for constants in a model of the mechanical behavior of rubbermore Composites : mechanics, computations, applications ; an international journal 1 (2010) 1-19
Horecha, M.; Senkovsky, V.; Synytska, A.; Formanek, P.; Stamm, M.; Chervanyov, A.; Kiriy, A. Ordered surface structures from PNIPAM-based loosely packed microgel particlesmore Soft Matter 6 (2010) 5980-5992
Hinüber, C.; Häußler, L.; Vogel, R.; Brünig, H.; Werner, C. Hollow poly(3-hydroxybutyrate) fibers produced by melt spinningmore Macromolecular Materials and Engineering 295 (2010) 585-594
Schneider, K. Investigation of structural changes of semi-crystalline polymers during deformation by synchrotron X-ray scatteringmore Journal of Polymer Science: Part B: Polymer Physics 48 (2010) 1574-1586
Richter, S.; Grenzer, M.; Stöckelhuber, K.W.; Heinrich, G. Jamming in filled polymer systemsmore Macromolecular Symposia 291-292 (2010) 193-201
Toshchevikov, V. P.; Heinrich, G.; Gotlib, Yu. Ya. Shear dynamic moduli of stretched polymer chains and networks: Modified rouse modelmore Macromolecular Theory and Simulations 19 (2010) 195-209
Grenzer, M.; Toshchevikov, V. P.; Ilnytskyi, J. Photoinduced deformations in azobenzene polymer filmsmore Nonlinear Optics, Quantum Optics 41 (2010) 27-57
Bräuer, M.; Wießner, S.; Edelmann, M.; Gedan-Smolka, M.; Hupfer, B.; Lehmann, D.; Nagel, J.; Schneider, K. Verbundspritzgießen auf pulverlackierte Blechemore Kautschuk Gummi Kunststoffe 63 (2010) 12-19
Morozov, I.; Lauke, B.; Heinrich, G. A new structural model of carbon black framework in rubbersmore Computational Materials Science 47 (2010) 817-825
Skipa, T.; Lellinger, D.; Böhm, W.; Grenzer, M.; Alig, I. Influence of shear deformation on carbon nanotube networks in polycarbonate melts: Interplay between build-up and destruction of agglomeratesmore Polymer 51 (2010) 201-210
Pilling, E.; Eckelt, U.; Loukota, R.; Schneider, K.; Stadlinger, B. Comparative evaluation of ten different condylar base fracture osteosynthesis techniquesmore British Journal of Oral and Maxillofacial Surgery 48 (2010) 527-531
Chervanyov, A.; Heinrich, G. Potential theory of the depletion interaction in the colloid-polymer mixturesmore Journal of Chemical Physics 131 (2009) 234907
Richter, S.; Grenzer, M.; Jehnichen, D.; Bierdel, M.; Heinrich, G. Experimental and theoretical studies of agglomeration effects in multi-walled carbon nanotube-polycarbonate meltsmore eXPRESS Polymer Letters 3 (2009) 753-768
Skipa, T.; Lellinger, D.; Grenzer, M.; Alig, I. Shear-stimulated formation of multi-wall carbon nanotube networks in polymer meltsmore Physica Status Solidi / B 246 (2009) 2453-2456
Chervanyov, A.; Heinrich, G. Polymer adsorption onto patterned substrates: Where polymer physics meets scattering theorymore Polymeric Materials: Science and Engineering 101 (2009) 1773-1774
Semeriyanov, F.; Grenzer, M.; Heinrich, G. Anisotropic generalization of stinchcombe's solution for the conductivity of random resistor networks on a bethe latticemore Journal of Physics A: Mathematical and Theoretical 42 (2009) 465001 (17pp)
Lauke, B.; Morozov, I. Modeling of structure evolution of filled elastomers under uniaxial elongationmore International Journal of Multiscale Computational Engineering 7 (2009) 251-261
Horst, Th.; Reincke, K.; Ilisch, S.; Heinrich, G.; Grellmann, W. Fracture surface statistics of filled elastomersmore Physical Review / E 80 (2009) 046120(5)
Chervanyov, A.; Heinrich, G. Polymer adsorption in finite range surface potentials: Planar and spherical adsorbing surfacesmore Journal of Chemical Physics 131 (2009) 104905 (17 pages)
Morozov, I.; Lauke, B.; Heinrich, G. Quantitative structural analysis of filled rubber by AFMmore in: Constitutive Models for Rubber VI, Heinrich, G.; Kaliske, M.; Lion, A.; Reese, S., ed. (CRC Press 2009) , 473-488
Svistkov, A.; Pelevin, A.; Adamov, A. A.; Lauke, B.; Heinrich, G. Structural-phenomenological modelling of softening and recovery of mechanical properties of elastomer nanocompositemore in: Constitutive Models for Rubber VI, Heinrich, G.; Kaliske, M.; Lion, A.; Reese, S., ed. (CRC Press 2009) , 85-90
Pelevin, A.; Lauke, B.; Heinrich, G.; Svistkov, A.; Adamov, A. A. Algorithm of constant definition for a visco-elastic rubber model based cyclic experiments, stress relaxation and creep datamore in: Constitutive Models for Rubber VI, Heinrich, G.; Kaliske, M.; Lion, A.; Reese, S., ed. (CRC Press 2009) , 79-84
Horst, Th.; Heinrich, G. Structural influence on crack propagation behaviour in elastomeric materialsmore in: Constitutive Models for Rubber VI, Heinrich, G.; Kaliske, M.; Lion, A.; Reese, S., ed. (CRC Press 2009) , 331-336
Veer, P. U.; Pietsch, U.; Grenzer, M. Time and temperature dependence of surface relief grating formation in polymers containing azobenzene groups with different dipole momentmore Journal of Applied Physics 106 (2009) 014909 (7 pages)
Richter, S.; Grenzer, M.; Heinrich, G. Flocculation kinetics in the light of jamming physics: New insights into the payne-effect in filled rubbersmore in: Constitutive Models for Rubber VI, Heinrich, G.; Kaliske, M.; Lion, A.; Reese, S., ed. (CRC Press 2009) , 205-210
Toshchevikov, V. P.; Heinrich, G.; Gotlib, Y. Dynamic mechanical properties of strongly stretched polymer chains and networks: Different molecular modelsmore in: Constitutive Models for Rubber VI, Heinrich, G.; Kaliske, M.; Lion, A.; Reese, S., ed. (CRC Press 2009) , 435-442
Komar, L. A.; Svistkov, A.; Heinrich, G.; Lauke, B. Changes in the orientation state of polymer molecules in the space between filler particlesmore in: Constitutive Models for Rubber VI, Heinrich, G.; Kaliske, M.; Lion, A.; Reese, S., ed. (CRC Press 2009) , 413-416
Toshchevikov, V. P.; Grenzer, M.; Heinrich, G. Theory of light-induced deformations in azobenzene polymers: structure-property relationshipmore in: Optical Materials in Defence Systems Technology VI, JG. Grote, F. Kajzar, R. Zamboni, ed. (Proceedings of SPIE 2009) 7487, 74870B 1-12
Duan, Y.; Thunga, M.; Schlegel, R.; Schneider, K.; Rettler, E.; Weidisch, R.; Siesler, H.W.; Stamm, M.; Mays, J.W.; Hadjichristidis, N. Morphology and deformation mechanisms and tensile properties of tetrafunctional multigraft copolymersmore Macromolecules 42 (2009) 4155-4164
Fan, Z.; Jähnichen, K.; Desbois, P.; Häußler, L.; Vogel, R.; Voit, B. Blends of different linear polyamides with hyperbranched aromatic AB2 and A2+B3 polyestersmore Journal of Polymer Science: Part A: Polymer Chemistry 47 (2009) 3558-3572
Ghosh, A.; Banerjee, S.; Komber, H.; Schneider, K.; Häußler, L.; Voit, B. Synthesis and characterization of fluorinated poly(imide siloxane) block copolymersmore European Polymer Journal 45 (2009) 1561-1569
Schneider, K.; Zafeiropoulos, N.E.; Stamm, M. In situ investigation of structural changes during deformation and fracture of polymers by synchrotron-SAXS and WAXSmore Advanced Engineering Materials 11 (2009) 502-506
Svistkov, A.; Lauke, B. Differential constitutive equations of incompressible media with finite deformationsmore Journal of Applied Mechanics and Technical Physics 50 (2009) 493-503
Toshchevikov, V. P.; Gotlib, Y. Shear Dynamic modulus of nematic elastomers: Modified rouse modelmore Macromolecules 42 (2009) 3417-3429
Toshchevikov, V. P.; Grenzer, M.; Heinrich, G. Microscopic theory of light-induced deformation in amorphous side-chain azobenzene polymersmore Journal of Physical Chemistry / B 113 (2009) 5032-5045
Fu, S.-Y.; Mai, Y.W.; Lauke, B. Science and Engineering of Short Fiber Reinforced Polymersmore in: Science and engineering of short fibre reinforced polymer composites, Fu, Lauke, Mai, ed. (Woodhead Publishing Limited 2009) ,
Vyas, M. K.; Nandan, B.; Schneider, K.; Stamm, M. Nanowear studies in chemically heterogeneous responsive polymeric brushes by surface force microscopymore European Polymer Journal 45 (2009) 1367-1376
Kondyurin, A.V.; Lauke, B.; Vogel, R.; Netchitailo, G. S. Cinetics of photopolymerization of polymer composites under model conditions of space flights ( in Russ.)more Plasticeskie massy (2009) 50-55
Vyas, M. K.; Nandan, B.; Schneider, K.; Stamm, M. Nanowear studies in reversibly switchable polystyrene-poly(acrylic acid) mixed brushesmore Journal of Colloid and Interface Science 328 (2008) 58-66
Ilnytski, Y.; Neher, D.; Grenzer, M.; Wilson, M. R.; Stimson, L. Molecular dynamics simulations of various branched polymeric liquid crystalsmore Molecular Crystals and Liquid Crystals 496 (2008) 186-201
Lauke, B. On the effect of particle size on fracture toughness of polymer compositesmore Composites Science and Technology 68 (2008) 3365-3372
Das, A.; Stöckelhuber, K.W.; Jurk, R.; Grenzer, M.; Fritzsche, J.; Lorenz, H.; Klüppel, M.; Heinrich, G. Modified and unmodified multiwalled carbon nanotubes in high performance solution-styrene-butadiene and butadiene rubber blendsmore Polymer 49 (2008) 5276-5283
Chervanyov, A.; Heinrich, G. Polymer adsorption onto chemically non-uniform surfaces: Identifying major influence factorsmore Polymeric Materials: Science and Engineering 99 (2008)
Stiller, B.; Grenzer, M.; Morawetz, K.; Ilnytskyi, J.; Neher, D.; Muzikante, I.; Pastors, P.; Kampars, V. Polymers films with indandione derives as alternatives to azobenzene polymers for optical patterningmore Thin Solid Films 516 (2008) 8893-8898
Chervanyov, A.; Heinrich, G. Anaytic theory of the adsorption-desorption transition of Gaussian polymers interacting with a periodic lattice of adsorbing centersmore Journal of Chemical Physics 129 (2008) 074902, 1-9
Figiel, L.; Lauke, B.; Kaminski, M. Sensitivity analysis in a fatigue delamination problem of an elastic two layer compositemore Engineering Transactions 59 (2008) 65-87
Vyas, M. K.; Schneider, K.; Nandan, B.; Stamm, M. Switching of friction by binary polymer brushesmore Soft Matter 4 (2008) 1024-1032
Fu, S.-Y.; Feng, Xi-Qiao; Lauke, B.; Mai, Y.W. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate polymer compositesmore Composites: Part B 39 (2008) 933-961
Svistkov, A.; Lauke, B. Structural-phenomenological simulation of the mechanical behavior of rubbers. In kyrill. Schriftmore Vysokomol. Soedinenija, Ser. A 50 (2008) 892-902
Svistkov, A.; Komar, L. A.; Heinrich, G.; Lauke, B. Modeling of the formation of oriented-polymer layers at filler particles in polymer nanocomposites. - In kyrill. Schriftmore Vysokomol. Soedinenija, Ser. A 50 (2008) 903-910
Grenzer, M.; Costa, F. R.; Wagenknecht, U.; Heinrich, G. Nonlinear behavior of polyethylene/layered double hydroxide nanocomposites under shear flow. - In kyrill. Schr.more Vysokomol. Soedinenija, Ser. A 50 (2008) 868-881
Li, X.; Schneider, K.; Kretzschmar, B.; Stamm, M. Deformation behavior of PP and PP/ZnO Nanocomposites as studied by SAXS and WAXSmore Macromolecules 41 (2008) 4371-4379
Duan, Y.; Rettler, E.; Schneider, K.; Schlegel, R.; Thunga, M.; Weidisch, R.; Siesler, H.W.; Stamm, M.; Mays, J.W.; Hadjichristidis, N. Deformation behavior of sphere-forming trifunctional multigraft copolymermore Macromolecules 41 (2008) 4565-4568
Grenzer, M.; Costa, F. R.; Wagenknecht, U.; Heinrich, G. Nonlinear behavior of polyethylene/layered double hydroxide nanocomposites under shear flowmore Polymer Science / Series A 50 (2008) 573-582
Veer, P. U.; Pietsch, U.; Rochon, P. L.; Grenzer, M. Temperature dependent analysis of grafting formation on azobenzene polymer filmsmore Molecular Crystals and Liquid Crystals 486 (2008) 66-78
Horst, Th.; Heinrich, G. Crack propagation behavior in rubber materialsmore Polymer Science / Series A 50 (2008) 583-590
Horst, Th.; Heinrich, G. Crack propagation behavior in rubber materials. - In kyrill. Schriftmore Vysokomolekuljarnye soedinenija / A i B 50 (2008) 582-591
Vogel, R.; Voigt, D.; Tändler, B.; Gohs, U.; Häußler, L. Melt spinning of poly(3-hydroxybutyrate) for tissue engineering using electron-beam irradiated poly(3-hydroxybutyrate) as nucleation agentmore Macromolecular Bioscience 8 (2008) 426-431
Svistkov, A.; Lauke, B. Structural-phenomenological simulation of the mechanical behavior of rubbersmore Polymer Science / Series A 50 (2008) 591-599
Svistkov, A.; Komar, L. A.; Heinrich, G.; Lauke, B. Modeling of the formation of oriented-polymer layers at filler particles in polymer nanocompositesmore Polymer Science / Series A 50 (2008) 600-606
Schneider, K. Mechanical properties of polymers at surfaces and interfacesmore in: Polymer Surfaces and Interfaces : Characterization, Modification and Applications, Stamm, M., ed. (Springer 2008) Chapter 7, 139-160
Costa, F. R.; Grenzer, M.; Wagenknecht, U.; Heinrich, G. Layered double hydroxide based polymer nanocompositesmore in: Wax Crystal Control - Nanocomposites Stimuli-Responsive Polymers, Series: Advances in Polymer Science, ed. (Springer 2008) 210, 101-168
Schneider, K.; Stamm, M. Textile Verbundbauweisen und Fertigungstechnologien für Leichtbaustrukturen des Maschinen- und Fahrzeugbaus Harz- und Preformeigenschaftenmore SDV Die Medien AG (2007) 73-79
Schneider, K.; Stamm, M. Textile Verbundbauweisen und Fertigungstechnologien für Leichtbaustrukturen des Maschinen- und Fahrzeugbaus Bauteilentwicklung Schüttgutbechermore SDV Die Medien AG (2007) 411-466
Chervanyov, A.; Heinrich, G. Flory radius of polymers in a periodic field: An exact analytic theorymore European Physical Journal E 24 (2007) 271-276
Svistkov, A.; Lauke, B.; Heinrich, G. Modeling viscoelastic properties and softening of rubber materialsmore in: Constitutive models for rubber V, A. Boukamel et al., ed. (CRC Press Inc. 2007) , 113-118
Horst, Th.; Heinrich, G. Viscoelasticity and its effect on crack propagation behaviour in rubbermore in: Constitutive models for rubber V, A. Boukamel et al., ed. (CRC Press Inc. 2007) , 209-214
Morozov, I.; Svistkov, A.; Heinrich, G.; Lauke, B. Structure of the carbon-black-particles framework in filled elastomer materialsmore Vysokomol. Soedinenija, Ser. A 49 (2007) 456-464
Morozov, I.; Svistkov, A.; Heinrich, G.; Lauke, B. Structure of the carbon-black-particles framework in filled elastomer materialsmore Polymer Science / Series A 49 (2007) 292-299
Chervanyov, A.; Heinrich, G. Polymers in an external periodic fields: the effect of the excluded volume interactionsmore Journal of Chemical Physics 127 (2007) 014902
Stocchi, A.; Lauke, B.; Vázquez, A.; Bernal, C. A novel fiber treatment applied to woven jute fabric/vinylester laminatesmore Composites / Part A 38 (2007) 1337-1343
Bernal, C.; Lauke, B. Fracture and failure behavior of jute-reinforced polymer compositesmore in: Engineering Biopolymers: Homopolymers, Blends, and Composites, S. Fakirov, D. Bhattacharyya , ed. (Hanser Verlag 2007) , 311-334
Schneider, K.; Lauke, B. Determination of compressive properties of fibre-reinforced polymers in the in-plane direction according to ISO 14126. Part 2: A critical investigation of failure behaviourmore Applied Composite Materials 14 (2007) 177-191
Lauke, B. Stress concentration along curved interfaces as basis for adhesion testsmore Composite Interfaces 14 (2007) 307-320
Vogel, R.; Tändler, B.; Voigt, D.; Jehnichen, D.; Häußler, L.; Peitzsch, L.; Brünig, H. Melt spinning of bacterial aliphatic polyester using reactive extrusion for improvement of crystallizationmore Macromolecular Bioscience 7 (2007) 820-828
Chervanyov, A.; Heinrich, G. Polymer adsorption onto selective mixed brushesmore Materials Research Society symposium proceedings 947 (2007) 0947-A10-02, 6 p.
Chervanyov, A.; Heinrich, G. Density of polymers in a layered structure: An exactly solvable modelmore Physical Review / E 75 (2007) 021801-1 - 021801-4
Schneider, K. Determination of compressive properties of fibre composites in the in-plane direction according to ISO 14126. Part 1: A round robin test round robin testmore Applied Composite Materials 14 (2007) 1-15
Fu, S.-Y.; Lauke, B.; Li, R. K. Y.; Mai, Y.W. Effects of PA6,6/PP ratio on the mechanical properties of short glass fiber reinforced and rubber-toughened polyamide 6,6/polypropylene blendsmore Composites / Part B 37 (2006) 182-190
Horst, Th.; Lauke, B.; Heinrich, G. Application of configurational forces in the context of a kinked crackmore PAMM - Proceedings in Applied Mathematics and Mechanics 6 (2006) 173-174
Morozov, I.; Svistkov, A.; Heinrich, G.; Lauke, B. Computer modeling and examination of structural properties of carbon black reinforced rubbermore Kautschuk Gummi Kunststoffe 59 (2006) 642-647
Mechau, N.; Grenzer, M.; Neher, D. Molecular tracer diffusion in thin azobenzene polymer layersmore Applied Physics Letters 89 (2006) 251902-251904
Figiel, L.; Lauke, B. Interface fracture of polymer films: blister test experiments and modellingmore International Journal of Fracture 139 (2006) 71-89
Lauke, B. Determination of adhesion strength between a coated particle and polymer matrixmore Composites Science and Technology 66 (2006) 3153-3160
Satapathy, B.K.; Lach, R.; Weidisch, R.; Schneider, K.; Janke, A.; Knoll, K. Morphology and crack toughness behaviour of nanostructured block copolymer/homopolymer blendsmore Engineering Fracture Mechanics 73 (2006) 2399-2412
Ilnytski, Y.; Grenzer, M.; Neher, D. Photo-induced deformations in azobenzene-containing side-chain polymers: molecular dynamics studymore Condensed Matter Physics 9 (2006) 87-94
Zafeiropoulos, N.E.; Davies, R.J.; Schneider, K.; Burghammer, M.; Riekel, Ch.; Stamm, M. The Relationship between Craze Structure and Molecular Weight in Polystyrene as Revealed by mSAXS Experimentsmore Macromolecular Rapid Communications 27 (2006) 1689-1694
Schüller, T.; Lauke, B. Finite-element simulation of interfacial crack propagation: Methods and tools for the complete failure process under large scale yieldingmore Engineering Fracture Mechanics 73 (2006) 2252-2263
Kondyurin, A.V.; Lauke, B.; Vogel, R. Photopolymerisation of composite material in simulated free space environment at low Earth orbital flightmore European Polymer Journal 42 (2006) 2703-2714
Haasemann, G.; Jacob, K.; Orawattanasrikul, S.; Schneider, K.; Diestel, O. Schüttgutbecher aus glasfaserverstärktem Kunststoffmore Schüttgut : die führende Fachzeitschrift für die Schüttgut-Industrie 12 (2006)
Chervanyov, A.; Heinrich, G. What really enhances the adsorption of polymers onto chemically nonuniform surfaces: Surface randomness or its heterogeneity?more Journal of Chemical Physics 125 (2006) 084703/1-11
Fahmi, A.; Gutmann, J.S.; Vogel, R.; Gindy, N.; Stamm, M. Rheology Pathway to Macroscale Ordered Nanostructures of Polymeric Nanotemplates: Nanopores, Nanosheets and Nanofibersmore Macromolecular Materials and Engineering 291 (2006) 1061-1073
Chervanyov, A.; Heinrich, G. Mixed brushes as selective self-adoptive patterns that enhance polymer adsorptionmore Polymeric Materials: Science and Engineering 51 (2006)
Vogel, R.; Tändler, B.; Häußler, L.; Jehnichen, D.; Brünig, H. Melt Spinning of Poly(3-hydroxybutyrate) Fibers for Tissue Engineering using a-Cyclodextrin/Polymer Inclusion Complexes as Nucleation Agentmore Macromolecular Bioscience 6 (2006) 730-736
Feldman, A. Y.; Wachtel, E.; Zafeiropoulos, N.E.; Schneider, K.; Stamm, M.; Davies, R.J.; Weinberg, A.; Marom, G. In situ synchrotron microbeam analysis of the stiffness of transcrystallinity in aramid fiber reinforced nylon 66 compositesmore Composite Science and Technology 66 (2006) 2009-2015
Devendra, R.; Hatzikiriakos, S.G.; Vogel, R. Rheology of metallocene polyethylene based nanocomposites: Influence of graft modificationmore Journal of Rheology 50 (2006) 415-434
Vogel, R.; Brünig, H.; Häußler, L.; Hatzikiriakos, S.G. Influence of Processing Aids on the Uniaxial Extensinal Behavior of Metallocene Polyethylenesmore Polymer Engineering and Science 46 (2006) 735-742
Schneider, K.; Trabelsi, S.; Zafeiropoulos, N.E.; Davies, R.J.; Riekel, Ch.; Stamm, M. The Study of Cavitation in HDPE Using Time Resolved Synchrotron X-ray Scattering During Tensile Deformationmore Macromolecular Symposia 236 (2006) 241-248
Kondyurina, I.; Kondyurin, A.V.; Lauke, B.; Figiel, L.; Vogel, R.; Reuter, U. Polymerisation of composite materials in space environment for development of a moon basemore Advances in Space Research 37 (2006) 109-115
Schüller, T.; Lauke, B. Finite-Element-Simulation of Interfacial Crack Propagation: Cross-check of Simulation Results with the Essential Work of Interfacial Fracture Methodmore Key Engineering Materials 312 (2006) 9-14
Zen, A; Saphiannikova, M.; Neher, D; Grenzer, J; Grigorian, S; Pietsch, U; Asawapirom, U; Janietz, S; Scherf, U; Lieberwirth, I; Wegner, G; Effect of molecular weight on the structure and crystallinity of poly(3-hexylthiophene)more Macromolecules 39 (2006) 2162-2171
Marburg, S.; Dienerowitz, F.; Horst, Th.; Schneider, St. Normal Modes in External Acoustics. Part II: Eigenvalues and Eingenvectors in 2Dmore Acta Acustica united with Acustica 92 (2006) 97-111
Huang, Chin-Feng; Fu, S.-Y.; Lauke, B.; Li, L.F.; Ye, L. Cryogenic properties of SiO2/epoxy nanocompositesmore Cryogenics 45 (2006) 450-454
Fu, S.-Y.; Lauke, B.; Zhang, Y. H.; Mai, Y.W. On the post-mortem fracture surface morphology of short fiber reinforced thermoplasticsmore Composites / Part A 36 (2005) 987-994
Schöne, A.; Ziabicki, A.; Jarecki, L. Transient uniaxial orientation of flexible polymer chains in a wide range of elongation ratesmore Polymer 46 (2005) 3927-3935
Schmack, G.; Aquino, E.; Vogel, R.; Tändler, B.; Häußler, L.; Voigt, D. Investigation of the recycling capability of poly(lactide)more Chemical Fibers International 55 (2005) 292-297
Zafeiropoulos, N.E.; Davies, R.J.; Roth, S.V.; Burghammer, M.; Schneider, K.; Riekel, C.; Stamm, M. Microfocus X-Ray Scattering Scanning Microscopy for Polymer Applicationsmore Macromolecular Rapid Communications 26 (2005) 1547-1551
Lauke, B.; Schneider, K.; Schüller, T. Determination of interface strength of polymer-polymer joints by a curved interface tensile testmore in: Polymer-Composites : From Nano- to Macro-Scale, Friedrich, K.; Fakirov, S.; Zhong Zhang, ed. (Springer 2005) , 133-146
Saphiannikova, M.; Neher, D; Thermodynamic theory of light-induced material transport in amorphous azobenzene polymer filmsmore Journal of Physical Chemistry / B 109 (2005) 19428 -19436
Stiller, B; Geue, T; Morawetz, K; Saphiannikova, M. Optical patterning in azobenzene polymer filmsmore Journal of Microscopy 219 (2005) 109-114
Heinrich, G.; Costa, F. R.; Abdel-Goad, M.; Wagenknecht, U.; Lauke, B.; Härtel, V.; Tschimmel, J.; Klüppel, M.; Sviskov, A.L. Structural Kinetics in Filled Elastomers and PE/LDH Compositesmore Kautschuk Gummi Kunststoffe 58 (2005) 163-167
Pospiech, D.; Komber, H.; Jehnichen, D.; Häußler, L.; Eckstein, K.; Scheibner, H.; Janke, A.; Kricheldorf, H.R.; Petermann, O. Multiblock Copolymers of L-Lactide and Trimethylene Carbonatemore Biomacromolecules 6 (2005) 439-446
Mechau, N; Saphiannikova, M.; Neher, D; Dielectric and mechanical properties of azobenzene polymer layers under visible and ultraviolet irradiationmore Macromolecules 38 (2005) 3894-3902
Lach, R.; Schneider, K.; Weidisch, R.; Janke, A.; Knoll, K. Application of the essential work of fracture concept to nanostructured polymer materialsmore European Polymer Journal 41 (2005) 383-392
Zen, A; Saphiannikova, M.; Neher, D; Asawapirom, U; Scherf, U; Comparative study of the field-effect mobility of a copolymer and a binary blend based on poly(3-alkylthiophene)smore Chemistry of Materials 17 (2005) 781-786
Figiel, L.; Zafeiropoulos, N.E.; Lauke, B. Numerical analysis of the elastic constants´ effect on the delamination propagation in a curved layered composite beam under cyclic shear loadingmore Composites / Part A 36 (2005) 153-162
Golzar, M.; Beyreuther, R.; Brünig, H.; Tändler, B.; Vogel, R. Online Temperature Measurement and Simultaneous Diameter Estimation of Fibres by Thermography of the Spinnline in the Melt Spinning Processmore Advances in Polymer Technology 23 (2004) 176-185
Kondyurin, A.V.; Lauke, B.; Kondyurina, I.; Orba, E. Creation of biological module for self-regulating ecological system by the way of polymerization of composite materials in free spacemore Advances in Space Research 34 (2004) 1585-1591
Vogel, R.; Hatzikiriakos, S.G. Rheological Evaluation of Metallocene Polyethylenes with processing aids by Multi - Wave Oscillationsmore Polymer Engineering and Science 44 (2004) 2047-2051
Brantseva, T.V.; Gorbatkina, Yu.A.; Dutschk, V.; Schneider, K.; Häßler, R.; Kerber, M.L. Modification of epoxy resin by polysulfone to improve the interfacial and mechanical properties in glass fibre composites. III Properties of the blends and their structure at the polymer/fiber interphasemore Journal of Adhesion Science and Technology 18 (2004) 1309-1323
Ziabicki, A.; Jarecki, L.; Schöne, A. Transient biaxial orientation of flexible polymer chains in a wide range of deformation conditionsmore Polymer 45 (2004) 5735-5742
Kondyurin, A.V.; Lauke, B. Curing of liquid epoxy resin in plasma dischargemore European Polymer Journal 40 (2004) 1915-1923
Lauke, B.; Schüller, T.; Beckert, W. The Application of Fracture Mechanics to Polymers, Adhesives and Composites Determination of interface adhesion in single-fibre pull-out and microbond experimentsmore Elsevier (2004) 227-232
Stiller, B; Karageirgiev, P; Geue, T; Morawetz, K; Saphiannikova, M.; Mechau, N; Neher, D; Optically induced mass transport studied by scanning near-field optical- and atomic force microscopymore Physics of Low-Dimensional Structures Part 3/4 (2004) 129-137
Saphiannikova, M.; Henneberg, O; Gene, TM; Pietsch, U; Rochon, P; Nonlinear effects during inscription of azobenzene surface relief gratingsmore Journal of Physical Chemistry / B 108 (2004) 15084 -15089
Kondyurin, A.V.; Lauke, B.; Richter, E. Polymerization Processes of Epoxy Matrix Composites under Simulated Free Space Conditionsmore High Performance Polymers 16 (2004) 163-175
Davies, R.J.; Zafeiropoulos, N.E.; Schneider, K.; Roth, S.V.; Burghammer, M.; Riekel, C.; Kotek, J.; Stamm, M. The use of synchrotron x-ray scattering coupled with in situ mechanical testing for studying deformation and structural change in isotactic polypropylenemore Colloid and Polymer Science 282 (2004) 854-866
Henneberg, O; Panzner, T; Pietsch, U; Geue, T; Saphiannikova, M.; Rochon, P; Finkelstein, K; X-ray and VIS light scattering from light-induced polymer gratingsmore Zeitschrift für Kristallographie 219 (2004) 218-223
Henneberg, O; Geue, T; Pietsch, U; Saphiannikova, M.; Winter, B; Investigation of azobenzene side group orientation in polymer surface relief gratings by means of photoelectron spectroscopymore Applied Physics Letters 84 (2004) 1561-1563
Saphiannikova, M.; Geue, TM; Henneberg, O; Morawetz, K; Pietsch, U; Linear viscoelastic analysis of formation and relaxation of azobenzene polymer gratingsmore Journal of Chemical Physics 120 (2004) 4039-4045
Figiel, L.; Kaminski, M.; Lauke, B. Analysis of a compression shear fracture test for curved interfaces in layered compositesmore Engineering Fracture Mechanics 71 (2004) 967-980
Schneider, K.; Zafeiropoulos, N.E.; Häußler, L.; Stamm, M. High-throughput screening of the influence of thermal treatments on the mechanical properties of semicrystalline polymers: A case Study iPPmore Macromolecular Rapid Communications 25 (2004) 355-359
Schneider, K.; Lauke, B.; Schüller, T. Determination of the interface strength between two polymer materials by a new curved interface tensile test: Preliminary experimental resultsmore Composite Interfaces 10 (2003) 581-591
Brantseva, T.V.; Gorbatkina, Yu.A.; Dutschk, V.; Vogel, R.; Grundke, K.; Kerber, M.L. Modification of epoxy resin by polysulfone to improve the interfacial and mechanical properties in glass fibre composites. I. Study of processes during matrix/glass fibre interface formationmore Journal of Adhesion Science and Technology 17 (2003) 2047-2063
Beyreuther, R.; Tändler, B.; Vogel, R.; Hoffmann, M. Melt spinning of reactive extruded and/or blended polymer fibers by means of an online coupled twin screw extrudermore International Polymer Processing 18 (2003) 74-79
Hoffmann, M.; Beyreuther, R.; Vogel, R.; Tändler, B. Melt spinning of crosslinkable thermoplastic elastomers by means of twin screw extrusionmore Chemical Fibers International 53 (2003)
Zafeiropoulos, N.E.; Pohlers, A.; Jehnichen, D.; Kummer, S.; Roth, S.; Burghammer, M.; Schneider, K.; Weidisch, R.; Stamm, M. A study of the deformation process of triblock poly(styrene-b-butadiene) copolymers with the use of micro focus beam synchrotron radiation in situ with tensile testingmore The Europan Synchrotron Radiation Facility (2003)
Schmack, G.; Tändler, B.; Vogel, R.; Häußler, L.; Blechschmidt, D.; Lindner, R. Melt Processing of a New Biodegradable Synthetic Copolyester in High-Speed Spinning and Spunbonding Nonwoven Processmore Chemical Fibers International 53 (2003)
Haselbach, W.; Lauke, B. Acoustic emission of debonding between fibre and matrix to evaluate local adhesionmore Composite Science and Technology 63 (2003) 2155-2162
Botelho, E.C.; Figiel, L.; Rezende, M.C.; Lauke, B. Mechanical behavior of carbon fiber reinforced polyamide compositesmore Composites Science and Technology 63 (2003) 1843-1855
Vogel, R.; Hatzikiriakos, S.G.; Brünig, H.; Tändler, B.; Golzar, M. Improved Spinnability of Metallocene Polyethylenes by Using Processing Aidsmore International Polymer Processing 18 (2003) 67-73
Rauwolf, C.; Schneider, K.; Werner, C. Molecular Modeling der Grenzfläche amorphes TiO2-Kollagenmore Biomaterialien 4 (2003) 178-183
Lauke, B.; Schüller, T.; Schneider, K. Determination of interface strength between two polymer materials by a new curved interface tensile testmore Composite Interfaces 10 (2003) 1-15
Brünig, H.; Beyreuther, R.; Vogel, R.; Tändler, B. Melt spinning of fine and ultra-fine PEEK-filamentsmore Journal of Materials Science 38 (2003) 2149-2153
Saphiannikova, M.; Radtchenko, I; Sukhorukov, G; Shchukin, D; Yakimansky, A; Ilnytskyi, J; Molecular-dynamics simulations and x-ray analysis of dye precipitates in the polyelectrolyte microcapsulesmore Journal of Chemical Physics 118 (2003) 9007-9014
Geue, TM; Saphiannikova, M.; Henneberg, O; Pietsch, U; Rochon, PL; Natansohn, AL; X-ray investigations of formation efficiency of buried azobenzene polymer density gratingsmore Journal of Applied Physics 93 (2003) 3161-3166
A.A. Darinskii, A.I. Tupitsyna, T.M. Birshtein, M.G. Safyannikova, V. M. Amoskov and I. Emri Microphase Separation in Brushes Capable of Liquid Crystal Orderingmore Polymer Science / Series A 45 (2003) 665-675
Fu, S.-Y.; Mai, Y.W.; Lauke, B.; Xu, G.; Yue, C. Y. Combined effect of fiber content and microstructure on the fracture toughness of SGF and SCF reinforced polypropylene compositesmore Journal of Materials Science 37 (2002) 3067-2074
Jehnichen, D.; Pohlers, A.; Zafeiropoulos, N.E.; Kummer, S.; Schneider, K.; Lehmann, D.; Stamm, M.; Roth, S.; Burghammer, M.; Riekel, C. Scanning X-ray microscopy for polymer applicationsmore The Europan Synchrotron Radiation Facility (2002)
Lauke, B.; Schüller, T. Calculation of stress concentration caused by a coated particle in polymer matrix to determine adhesion strength at the interfacemore Composite Science and Technology 62 (2002) 1965-1978
Xiaoyu, J.; Lauke, B.; Schüller, T. Frictional contact analysis of scratch test for elastic and elastic-plastic thin-coating/substrate materialsmore Thin Solid Films 414 (2002) 63-71
Tändler, B.; Schmack, G.; Vogel, R.; Blechschmidt, D.; Lindner, R. Melt Processing of a New Biodegradable Synthetic Polymer in High-Speed Spinning and Underpressure Spunbonding Processmore Journal of Polymers and the Environment 9 (2002) 149-156
Beyreuther, R.; Brünig, H.; Vogel, R. Preferable Filament Diameter Ratios of Hybrid Yarn Components for Optimized Longfiber Reinforced Thermoplasticsmore International Polymer Processing 17 (2002) 153-157
Schüller, T.; Lauke, B. Measuring the interfacial transverse strength: a novel test for evaluating polymer jointsmore International Journal of Adhesion and Adhesives 22 (2002) 169-174
Geue, TM; Saphiannikova, M.; Henneberg, O; Pietsch, U; Rochon, PL; Natansohn, AL; Formation mechanism and dynamics in polymer surface gratingsmore Physical Review / E 65 (2002) 052801, 4 pages
Fu, S.-Y.; Mai, Y.W.; Lauke, B.; Yue, C. Y. Synergistic effect on the fracture toughness of hybrid short glass fiber and short carbon fiber reinforced polypropylene compositesmore Materials Science and Engineering / A 323 (2002) 326-335
Henneberg, O; Geue, T; Saphiannikova, M.; Pietsch, U; Natansohn, A; Rochon, P; Finkelstein, K; Investigation of material flow on inscribing a polymer surface grating probing X-ray and VIS light scatteringmore Colloids and Surfaces A: Physicochemical and Engineering Aspects 198-200 (2002) 107-111
Hone, JHE; Cosgrove, T; Saphiannikova, M.; Obey, TM; Marshall, JC; Crowley, TL; Structure of physically adsorbed polymer layers measured by small-angle neutron scattering using contrast variation methodsmore Langmuir 18 (2002) 855-864
Fu, S.-Y.; Mai, Y.W.; Lauke, B.; Xu, G.; Yue, C. Y. Fracture behavior of short glass fiber and short carbon fiber reinforced polypropylene compositesmore International Journal of Materials & Product Technology 17 (2002) 108-120
Henneberg, O; Geue, T; Saphiannikova, M.; Pietsch, U; Rochon, P; Natansohn, A; Formation and dynamics of polymer surface relief gratingsmore Applied Surface Science 182 (2002) 272-279
Dollhofer, J.; Beckert, W.; Lauke, B. Plasticity aspects of interfacial fracture for polymer/glass specimesmore Theoretical and Applied Fracture Mechanics 36 (2001) 1-15
Dollhofer, J.; Beckert, W.; Lauke, B.; Schneider, K. Fracture mechanics characterization of mixed-mode toughness of thermoplast/glass interfaces (brittle/ductile interfacial mixed-mode fracture)more Journal of Adhesion Science and Technology 15 (2001) 1559-1587
Fu, S.-Y.; Lauke, B.; Mäder, E.; Yue, C. Y.; Hu, X.; Mai, Y.W. Hybrid effects on tensile properties of hybrid short-glass-fiber- and short-carbon-fiber-reinforced polypropylene compositesmore Journal of Materials Science 36 (2001) 1243-1251
Schneider, K.; Herrmann, V. Semi-quantitative mechanical characterization of fibre composites in the sub-micron-range by SFMmore Composites / Part A 32 (2001) 1679-1687
Henneberg, O.; Geue, Th.; Pietsch, U.; Saphiannikova, M.; Chi, L. F.; Rochon, P.; Natansohn, A. L. Atomic force microscopy inspection of the early state of formation of polymer surface relief gratingsmore Applied Physics Letters 79 (2001) 2357-2359
Beyreuther, R.; Tändler, B.; Hoffmann, M.; Vogel, R. Reactive extrusion and melt spinning - A new technological route to special fibresmore Journal of Materials Science 36 (2001) 3103-3111
Jiang, J.; Lauke, B.; Beckert, W.; Schüller, T. Numerical simulation of micro-scratch tests for coating/substrate compositesmore Composite Interfaces 8 (2001) 19-40
Schmack, G.; Jehnichen, D.; Vogel, R.; Tändler, B.; Beyreuther, R.; Jacobsen, S.; Fritz, H.-G. Biodegradable fibres spun from poly(lactide) generated by reactive extrusionmore Journal of Biotechnology 86 (2001) 151-160
Gorenflo, V.; Schmack, G.; Vogel, R.; Steinbüchel, A. Development of a Process for the Biotechnological Large-Scale Production of 4-Hydroxyvalerate-Containing Polyesters and Characterization of Their Physical and Mechanical Propertiesmore Biomacromolecules 2 (2001) 45-57
Schneider, K.; Lauke, B.; Beckert, W. Compression Shear Test (CST) - A Convenient Apparatus for the Estimation of Apparent Shear Strength of Composite Materialsmore Applied Composite Materials 8 (2001) 43-62
Lauke, B.; Schüller, T. Essential work of interfacial fracture: a method to characterise adhesion at polymer-polymer interfacesmore International Journal of Adhesion and Adhesives 21 (2001) 55-58
Vogel, R.; Jenschke, W.; Beyreuther, R. Generation of an antistatic polyolefin fiber by adding a carbon black filled componentmore Chemical Fibers International 50 (2000)
Schneider, K.; Scheibner, H.; Bellman, C. Estimation of tensile properties of bare elastane yarnsmore Chemical Fibers International 50 (2000)
Hoffmann, M.; Tändler, B.; Beyreuther, R.; Vogel, R. Schmelzspinnen mit Doppelschneckenextruder. Teil II: Polyolefin-Elastomerfasern mittels reaktiver Extrusionmore Kautschuk Gummi Kunststoffe 53 (2000) 632-637
Schüller, T.; Beckert, W.; Lauke, B.; Ageorges, C.; Friedrich, K. Single fibre transverse debonding: stress analysis of the Broutman testmore Composites / Part A 31 (2000) 661-670
Schmack, G.; Jehnichen, D.; Vogel, R.; Tändler, B. Biodegradable Fibers of Poly(3-hydroxybutyrate) Produced by High-Speed Melt Spinning and Spin Drawingmore Journal of Polymer Science: Part B: Polymer Physics 38 (2000) 2841-2850
Beyreuther, R.; Vogel, R.; Tändler, B.; Hoffmann, M. Schmelzspinnen mit Doppelschneckenextruder. Teil I: Technologische Voraussetzungen und Zielemore Kautschuk Gummi Kunststoffe 53 (2000) 601-606
Schüller, T.; Beckert, W.; Lauke, B.; Schüller, T. Single-fibre transverse debonding: tensile test of a necked specimenmore Composites Science and Technology 60 (2000) 2077-2082
Lauke, B.; Schüller, T.; Beckert, W. Calculation of adhesion strength at the interface of a coated particle embedded within matrix under multiaxial loadmore Computational Material Science 18 (2000) 362-380
Saphiannikova, M.; Neelov, I; Pryamitsyn, V; Darinskii, AA; Sundholm, F; Computer simulation of polymer brushes under shearmore Rheologica Acta 39 (2000) 469-475
Fu, S.-Y.; Lauke, B.; Mäder, E.; Yue, C. Y.; Fu, S.-Y. Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene compositesmore Composites / Part A 31 (2000) 1117-1125
Lauke, B.; Schüller, T.; Dollhofer, J. Polymerwerkstoffe 2000: Halle/Saale, 25. - 27. September 2000 Interface adhesion of polymer composites: mixed mode energy release rate and essential work of interfacial fracturemore Martin-Luther-Universität Halle-Wittenberg (2000) 194-197
Saphiannikova, M.; Darinskii, AA; Dyakonova, NE; Computer simulation of dilute polymer solutions in transient elongational flowsmore Macromolecular Theory and Simulations 9 (2000) 270-280
Saphiannikova, M.; Pryamitsyn, VA; Birshtein, TM; Self-consistent Brownian dynamics simulation of bimodal polymer brushes under shearmore Macromolecules 33 (2000) 2740-2747
Fu, S.-Y.; Lauke, B. Comparison of the stress transfer in single- and multi-fiber composite pull-out testsmore Journal of Adhesion Science and Technology 14 (2000) 437-452
Zhandarov, S.; Pisanova, E.; Schneider, K. Fiber-stretching test: a new technique for characterizing the fiber-matrix interface using direct observation of crack initiation and propagationmore Journal of Adhesion Science and Technology 14 (2000) 381-398
Saphiannikova, M.; Lukasheva, NV; Darinskii, AA; Gotlib, YY; Brickmann, J; Torsional vibrations of ester groups as a mechanism of dielectric relaxation of poly(p-hydroxybenzoic acid)more Macromolecules 33 (2000) 602-612
Fu, S.-Y.; Lauke, B. The elastic modulus of misaligned short-fiber-reinforced polymersmore Composites Science and Technology 58 (1998) 389-400
