Departments > Mechanics and Structure > Equipment

Equipment

Mechanical Characterization

  • Universal testing machines [Zwick] (ranges 10 N to 100 kN, -90 to 250 °C, different long-distance extensiometers, in-situ video monitoring)
  • Servo-Hydraulic testing machine 810 [MTS] (up to 50 kN, -130 to 315 °C, different extensiometers)
  • Optical 2D and 3D-deformation analysis [ARAMIS, GOM]
  • Self-made tensile and bending equipment f or the use under the microscope as well as in a synchrotron (different force ranges, max. 1 kN)
  • Impact bending testing (Charpy, Izod; also cold) and tensile 1 - 15 J, HDT/Vicat [CEAST], density (Helium-Micro-Pyknometer [Quantachrome] as well as buoyancy), ball-indentation hardness und Shore-A-hardness
  • Nanoindenter G200 [MTS Nano Instruments] for indentation with different tip geometries (Berkovich, sphere) and scratch test
  • Finite element analysis software ANSYS (2- and 3-dimensional modelling of mechanical problems with linear and non-linear material behaviour)

Thermo-analytical Characterization

  • Dynamic-mechanical analysis under different loads (tensile, bending, shear, torsion) DMA Q800 [TA Instruments] (parameter range: -150 ... 500 °C, 0,01...200 Hz, modulus range 106 ... 1011 Pa, fixed frequency and resonant mode), ARES [RheometricScientific]

Melt spinning

Universal laboratory high speed spinning equipment, combined with either a single screw high-temperature extruder or a twin screw extruder (Leistritz), both usable for:

  • melting and spinning temperature up to 450 °C (single sc.) or 350 °C (twin sc.)
  • spinning velocity 50 to 6000 m/min
  • throughput up to 3 kg/h
  • spinning of monofilament and multifilament yarns including hollow and profiled fibres
  • realization of spin-winding processes or spin-draw processes (including up to 3 heatable godet pairs)

Melt Spinning device for biomaterials combined with either a single screw extruder for pellets and a twin screw extruder for powders, blends and modifications:

  • melt spinning of biopolymer fibres under GMP conditions for applications in medicine
  • realization of spin-winding processes or spin-draw processes (including up to 3 heatable godet pairs)

Self constructed piston spinning equipment, usable for:

  • polymer samples up to 10 gram
  • melt and spinning temperatures up to 420 °C
  • spinning velocity from 5 to 2000 m/min

Multistage laboratory drawing equipment by Dienes, usable for:

  • velocities up to 2000 m/min
  • up to 3 godets (2 drawing zones) and heat plates
  • godets and plates heatable up to 450 °C

Various on-line measurement devices, usable for:

  • velocity (Laserspeed System, Modell LS50M), temperature and tensile force measurements for running fibres

Ultrasonic running time measurement device

 
Equipment
Ausstattung

Departments

Mechanics and Structure

News